Home Search Results

33 results for “Base Training Q A”

Found 33 results

Power-Based Training Acronyms

There are far too many acronyms in the sport of cycling, so here is your cheat sheet for all the important ones FTP: Functional Threshold Power - This is theoretically the maximum steady-state power you could hold for about an hour - It is a way to quantify your current level of fitness- many of your other zones will scale fairly linearly relative to your FTP - All of your rides are based on a percentage of your FTP IF: Intensity Factor® - This is a way of quantifying how intense your ride was - The scale is based on this: An IF of 1.0 would be equivalent to performing at FTP for 1 hour. Aka, your body could not possibly work any harder. - A 0.8 IF would represent a ride that averaged 80% of your Functional Threshold Power TSS: Training Stress Score® - This is the amount of stress that a workout inflicts on your body - With a large TSS, there is a greater opportunity for growth but also a greater need for proper recovery - Calculated based on a combination of IF and duration NP: Normalized Power® - This metric is similar to average power, with one minor difference - This metric "weights" different power zones differently. It gives more weight to your harder intervals and more closely represents the physiological toll - The purpose of this is to attempt to estimate the power you could have produced had you been constant throughout the ride - This allows you to more honestly compare one ride to another since the rest intervals have less of an effect on the overall average

Power 101 • Last updated on Aug 13, 2026

How To Sign Up For TrainerRoad

Ready to start training with science-based, structured workouts? Signing up for TrainerRoad takes just a few minutes. Follow the steps below to create your account and get started. Step 1: Go to TrainerRoad.com Visit www.trainerroad.com. You can begin the sign-up process in one of two places: - Click Sign Up in the top-right corner of the page, or - Click Start Getting Faster just below the top banner. Either option will take you to the membership selection page to begin your sign-up. Screenshot 2025-07-08 at 16.10.29.png Step 2: Choose a Membership Select the plan that works best for you: - Monthly Plan – $21.99/month, billed monthly. Cancel anytime. - Annual Plan – $209.99/year, billed once. Save over 20% compared to the monthly rate. Click Continue after selecting your plan. Step 3: Enter Your Payment Information You'll be prompted to enter your payment details next. TrainerRoad subscriptions begin immediately and your billing will follow the plan you selected. We accept major credit and debit cards, Apple Pay and PayPal. Once payment is complete, you’ll move on to creating your profile. Step 4: Create Your Account After confirming your subscription, you’ll finish creating your TrainerRoad profile by entering: - Your email address - A secure password - Your name and basic information Need Help? Have questions while signing up? We’re here to help. Reach out to [email protected], and we’ll get you sorted.

Subscription and Payment • Last updated on Jul 29, 2025

VirtualPower vs. Power Meters

Looking for more information on what differentiates power and VirtualPower-based workouts? You're in the right place. VirtualPower Defined VirtualPower turns your indoor non-smart trainer into a power meter. Just hook up an ANT+ or Bluetooth Smart speed sensor and select your trainer in the VirtualPower settings. When you start to ride, your speed will be converted to power based on the known power curve for the trainer. How VirtualPower Works As your wheel speed increases, so does your power. Each trainer has a unique speed-to-power ratio, otherwise known as a resistance curve. This allows us to plug in your current speed and display watts. We've built this into our software, so it happens on the fly and is seamless to you. Training with Power Training with power means using a device that directly measures power, such as a power meter (e.g., PowerTap, SRM, Quarq) or a smart trainer (e.g., KICKR, Computrainer, Powerbeam Pro). VirtualPower vs. Power - Which is the right choice for me? The main factor to consider when choosing between power and VirtualPower is cost. Power meters and smart trainers are, simply put, expensive! If you're not ready to shell out USD$600-3,000, you'll want to use VirtualPower. Power meters are great to race and train with, but if you're not quite ready to make the leap or just want to get a feel for training with power, VirtualPower is a great option. We think VirtualPower is a much better way to train than by heart rate or RPE. Heart Rate based training often "lags" behind actual efforts since the heart needs time to respond, usually 90 - 120 seconds, but when it comes down to it, a power meter will still be more accurate than VirtualPower. Is my trainer compatible? If you're a cyclist planning on using VirtualPower, a power meter, or a smart trainer, check with our list of supported devices and trainers.

VirtualPower • Last updated on Aug 13, 2026

FTP Testing - The Cornerstone of Training

Few components of power-based training are as important as measuring and tracking FTP. In fact, it could be argued that nothing short of actual performance ranks as highly in terms of overall importance. With this in mind, we offer the following primer on what your FTP represents, what an FTP test is, how and why we assess FTP, and when we assess it. What is FTP? Functional Threshold Power (FTP) is — quite simply — a measure of fitness. FTP represents the power (measured in watts) that you could theoretically maintain for about an hour, and it's the single metric we use to scale each of your workouts in our shared quest to keep your fitness growing. With regards to what's taking place within your body and the muscles themselves, riding at your FTP pushes you right up to that limit where pushing any harder will drastically limit the duration of your ride. But as long as you stay just below that acidic tipping point where your muscles light up and uncomfortably tolerable minutes become barely tolerable seconds, your muscles are in balance with the workload - for about an hour, anyway. What is the FTP Assessment? An FTP assessment is a snapshot of your fitness at any point in time. By measuring your fitness and assigning it a number, we can track changes in your fitness over weeks, months, and years. The assessment we use to measure this level of fitness is our Ramp Test. How is FTP Calculated from the Ramp Test? TrainerRoad will automatically calculate your FTP upon completion of your Ramp Test workout. If ridden correctly, you can expect your FTP to be about 75% of your highest 1-minute power sustained during the test. Note: More complicated calculations may be applied when determining FTP from a Ramp Test depending on how accurately a rider followed the format of the test. This means, 75% of a rider's 1-minute power may not translate to their actual FTP calculation. https://www.youtube.com/watch?v=wWHgMzpvH7c How is Functional Threshold Power Assessed? During a Ramp Test assessment, riders first follow a sufficient, stepwise warming period before progressing to their higher-intensity steps. The power that you average over the last, highest minute of your test allows us to mathematically estimate your current FTP. The goal here is to obtain a reasonably close estimate of one's sustainable power, or in power-based training nomenclature, your Functional Threshold Power/FTP. Why Do We Assess FTP? By assessing FTP, not only can we track changes in fitness, but we can also establish training zones, i.e. power levels. And as your fitness changes, we can update these power levels accordingly. Each type of interval, e.g. Tempo, Sweet Spot, VO2max, etc. represents a percentage of your FTP. For example, Tempo intervals fall in the 76-90% FTP range while VO2max intervals fall in the 106-120% FTP range. Different types of intervals target different energy systems and consequently different training adaptations, so it's important to have a personal measure of your fitness that will allow us to tailor your workouts to your specific needs and capabilities. When Should I Assess My FTP? It's a good idea to assess your FTP prior to beginning each training season unless you already have a good sense of your current fitness and your sustainable power. But even if you think you have a good grasp on your current fitness, it's still a good idea to back up your perception with actual performance. It's also recommended that you assess or reassess FTP before embarking on a new training plan. Finally, you should reassess your FTP about every 4-6 weeks in order to account for changes in your fitness and to keep your power levels in line with your performance potential. What if I'm Feeling Stronger Before My Scheduled FTP Test? Of course, testing roughly every 4-6 weeks is just a general guideline. Your FTP very well may have increased prior to 4-6 weeks after your last test. If you find yourself breathing easily through workouts with high-Intensity Factors (IFs)® or that you're often manually increasing the workout intensity before it's time for your next test, don't hesitate to manually edit your FTP. No need to wait for an FTP test if you know you're stronger. :)

Your First Ride • Last updated on Aug 13, 2026

How VirtualPower Works

Today's world of cycling is dominated by data — namely, power data. Unfortunately, power meters are expensive, and not everyone has one. So, we created VirtualPower to solve this problem. How VirtualPower Works VirtualPower allows riders to derive power readings without a power meter. Each trainer make, and model has a unique speed-to-power ratio (also referred to as the trainer's "power curve"). TrainerRoad takes speed readings from a rider's speed sensor and uses those speed readings to calculate VirtualPower based on the trainer's power curve. We'll use a fictional trainer ("Trainer X") as a hypothetical example to explain this further. It takes 20 miles per hour to output 250 watts, 21 miles per hour to output 255 and so on on "Trainer X". TrainerRoad will be able to calculate your VirtualPower as long as you have a speed sensor connected and the make/model of your trainer input in our software. TrainerRoad has power curves for most trainers currently in production. Additionally, we do our best to add the power curves of new trainers that arrive on the market. How Accurate is VirtualPower? The answer to this question depends on the power curve of the trainer you're using. Some trainers have a more accurate and true-to-road curve than others. This is why consistency is the most important variable when training indoors. Even if your VirtualPower readings are not 100% representative of your outdoor power, you can still reap the benefits of training with power as long as you use the same trainer and VirtualPower curve for each workout. Doing so means your results will be comparable, and you'll be able to track your progress. Learn More Learn more about VirtualPower and check your trainer's compatibility.

VirtualPower • Last updated on Aug 13, 2026

Wahoo KICKR CLIMB

The KICKR CLIMB is an indoor training device that physically adjusts the front of your bike to mimic climbing while riding indoors. TrainerRoad automatically adjusts the CLIMB based on the percent FTP of the interval your workout prescribes. The CLIMB can currently only be used with TrainerRoad while connected via Bluetooth Smart. Important Notes: The CLIMB is currently only compatible with the Wahoo KICKR (2017 Edition or newer) and Wahoo KICKR SNAP (2017 Edition or newer). The Climb will only adjust automatically when its corresponding KICKR is paired to the TrainerRoad mobile app via Bluetooth. The Climb is not compatible with the TrainerRoad desktop app or ANT+ at this time. climb_bike.jpg How does the KICKR CLIMB work with TrainerRoad? TrainerRoad automatically controls the CLIMB based on the intensity of an interval during a structured workout. Although the CLIMB is capable of simulating descending, TrainerRoad will only raise the unit to mimic climbing during training. The CLIMB automatically raises on a range from 75% to 175% of FTP. The CLIMB will automatically raise 1% with every 5% increase in FTP within the 75-175% FTP range. That means efforts at 75% of FTP, and anything below, will keep the CLIMB at 0% grade. For example, if your interval is prescribed at 80% of FTP, TrainerRoad automatically increases the grade of the CLIMB to mimic a 1% grade. Similarly, if your interval is at 100%, the grade will adjust to a 5% grade. The CLIMB maxes out at a 20% grade. This means the CLIMB won’t raise any higher than 20% once you reach 175% of your FTP. You can reference the scale below for clarity on how the grade relates to changes in % of FTP. new.png How do I set up the KICKR CLIMB with TrainerRoad? In order to use the CLIMB & KICKR/KICKR SNAP with TrainerRoad, you must first pair the CLIMB to your trainer. Once you’ve followed the steps to connect your trainer to the CLIMB, pair the KICKR/KICKR SNAP to TrainerRoad. The CLIMB will automatically adjust during your workouts once these steps are complete. Follow the links below for information on how to pair your KICKR or KICKR SNAP: How to pair the KICKR How to pair the KICKR SNAP How to Pair the CLIMB to Your Trainer Step 1: Download the Wahoo Fitness App on your iOS or Android device. If you already have the application downloaded, check the App Store or Google Play Store to confirm you’re on the latest version of the Wahoo Fitness App. Step 2: Confirm your trainer has the latest version of firmware. This step also requires the Wahoo Fitness App that you will already have downloaded from Step 1. Step 3: Confirm the CLIMB and KICKR/KICKR SNAP are plugged into a power supply. Ensure your trainer is powered by the LED lights on the rear of the trainer. Ensure the CLIMB is powered by the blue LED light illuminated on the CLIMB remote. Step 4: Press and hold the center "lock mode" button on the CLIMB remote for 3 seconds until a white LED begins to flash steadily. Step 5: Bring the CLIMB’s remote near your KICKR/KICKR SNAP until the center white LED flashes quickly, then turns solid. Success! The center white LED remaining solid indicates the CLIMB is connected and successfully paired to your trainer. Step 6: Open the Wahoo Fitness App and confirm the CLIMB is on the latest version of firmware for optimal training experience with the unit. Follow the link below for more details on how to confirm your CLIMB’s firmware is up to date: https://support.wahoofitness.com/hc/en-us/articles/360000132459 Step 7: Confirm the KICKR/KICKR SNAP and CLIMB are disconnected from the Wahoo Fitness App. Step 8: Connect the KICKR to TrainerRoad to begin training. Why is the CLIMB not automatically adjusting during my workouts? If you're still experiencing issues, shoot our support team a message at [email protected].

Setting Up Equipment and Connecting Devices • Last updated on Aug 13, 2026

The Basics of Build Training

Principals: During the second phase of training, the Build phase, each type of workout takes on a more event-specific purpose where greater emphasis is placed on escalating the weekly stress load via workouts that are more event-specific than what was encountered during the Base phase. This is where increasingly event-specific types of training are emphasized with the intent to improve more pertinent types of fitness while the more basic forms of fitness are mostly maintained. If you’re not training for a specific event, view this phase of training as the one in which the intent is to grow your Functional Threshold Power the most. Not only does Build phase training allow athletes to heighten their level of training specificity, it also brings their fitness to a point where middle-priority events can factor into their weekly training. Which Build Phase Training Plan is right for me? The optimal Build Phase will vary from athlete to athlete depending on their goals for the season. We recommend checking out the discipline-specific articles for a more in-depth recommendation that will relate directly to your goals and aspirations for the season. You can view these articles from the "Training Questions" section of our Help Center. Below is a brief summary of the three main types of TrainerRoad Build Training. - Short Power Build includes a healthy balance of muscular endurance work but trades an increased emphasis on VO2Max and Anaerobic efforts with a reduction in sustainable power focus. Less muscular endurance, more repeatable aerobic power. This approach suits a rider who needs more explosive, short-punchy power capabilities. Criterium racers, cyclocross competitors, and nearly all MTB & track riders fall into this category. - General Power Build is geared more towards the athlete whose discipline doesn’t require any more focus on short punchy power than it does sustainable power. Therefore, the General Power Build phase training plan fits a rider looking to capitalize on a well-rounded blend of abilities in both areas. - Sustained Power Build is focused on developing greater sustained power through the use of strength endurance work (Sweet Spot), lactate tolerance workouts (Threshold), and a healthy dose of maximum aerobic power intervals (VO2max). These areas of focus translate to the ability to sustain high percentages of FTP for increasingly long durations. - Polarized Build uses the 80/20 and 95/5 Polarized training models, where 80% of the training is done at low intensity and 20% is done at high intensity. These phases are designed to further increase an athletes aerobic capabilities, building on Polarized base. Polarized plans may require greater training volume to generate equivalent adaptions. - Masters Build Phases provides more recovery time than their standard counterparts. These can be great for any athlete who need more recovery time, while still building on the base phase for greater adaptation. There are no more than two days of Sweet Spot, or higher-intensity workouts each week. How Important is Build Training? Build Phase training is a critical step in developing cycling-specific performance capabilities and increasing your FTP which we do not recommend skipping. If you do not have enough time to complete the full Base and Build leading up to your target event, check out this article in our Blog on the methods to shorten your Training Plan. Main Takeaway: The aim of Build is not only to produce big gains in FTP but also to increase specificity as you get closer to your target event. What's Next? After the Build Phase, your next phase of training is the Specialty Phase. Click here to learn everything you need to know about the Specialty Phase.

Understanding your Training Plans • Last updated on Aug 20, 2026

How to Create a Zwift Training Plan

TrainerRoad offers custom training plans designed to target your Zwift goals. Available through Plan Builder under "General Fitness", Zwift plans provide a structured approach to training within the Zwift ecosystem! What are Zwift Training Plans? Zwift training plans are custom training plans targeting Zwift-specific goals. These Zwift-specific goals include: - Increasing FTP - Climbing Faster up Alpe Du Zwift - Building Endurance - Getting Faster for Zwift Races - General Fitness - Maintaining Fitness While some plans are similar to other goal-based structures, others—like those focused on climbing and racing—are uniquely designed to match the demands of Zwift's virtual terrain and race dynamics. If you want to focus on a Zwift specific goal this season, a Zwift training plan is perfect for you. How to Add a Zwift Training Plan to your Calendar You can build a custom Ziwft plan through Plan Builder on the TrainerRoad website, when you build a custom General Fitness training plan. Here's how to build your custom Zwift training plan: Step One: Open up Plan Builder on the TrainerRoad website through Training Plans > Create a custom plan Screen Shot 2025-03-13 at 1.51.05 PM.png Step Two: Choose General Fitness Screen Shot 2025-03-13 at 1.54.38 PM.png Step Three: Choose a start date Step Four: Under Discipline choose Zwift Step Five: Under Goal choose the focus of your training plan Screen Shot 2025-03-13 at 2.00.19 PM.png Step Six: Finish building out your training plan and add it to your Calendar! Your Zwift training plan is ready to go Screen Shot 2025-03-13 at 2.03.32 PM.png Frequently Asked Questions Do I need to be subscribed to Zwift to use these plans? Nope! These plans are available for all athletes, not just those who have active Zwift connections. Can I add an individual Zwift training phase to my plan? These plans are not available as individual phases. You'll need to build a custom general fitness plan through Plan Builder to access these plans! How do these plans differ from existing goal-based plans? Some of the plans generated for these goals are very similar to existing ones: for instance, Building Endurance plans are the same as they would be for a Road discipline plan aimed around this goal. Climbing and Racing plans are the most unique, because the demands of these disciplines in Zwift are very specific to Zwift and how these goals. What Zwift specific goals are available to train for? Zwift-specific goals include: Increasing FTP Climbing Faster up Alpe Du Zwift Building Endurance Getting Faster for Zwift Races General Fitness Maintaining Fitness Can I add Zwift races to my Calendar if I am not following a Zwift plan? Yes! You can still add reoccurring Zwift races as well as schedule one off Zwift races to your Calendar even if you are not following a Zwift training plan. For specific instructions on how to add Zwift races to your Calendar check out this article: How to add Zwift Races to your Calendar

Plan Builder • Last updated on Aug 20, 2026