Home Search Results

53 results for “outside”

Found 53 results

Training in ROUVY with TrainerRoad: FAQs

Workout Availability and Access What workouts will appear in ROUVY? If you are following a plan, your indoor TrainerRoad workouts scheduled for today will automatically appear in ROUVY. Workouts will not be sent to ROUVY on your plan’s scheduled rest days. If you aren't following a plan, a recommended workout of the day will automatically appear in ROUVY when you open up the app. Where do I find my workouts in ROUVY? Today’s workout appears near the top of the ROUVY app “Home” screen, as well as prominently near the top of the “Workouts” page.  What if my workout doesn't appear in ROUVY? First, check that it is scheduled for today, as workouts scheduled on future days aren’t synced until the day they are scheduled. Any changes in TrainerRoad may take a few minutes to appear in ROUVY. What happens to removed calendar workouts? Workouts removed from your TrainerRoad calendar will also disappear from ROUVY. This might not always happen immediately. Will planned runs sync over to ROUVY?  No, only planned indoor cycling workouts will sync to ROUVY.  FTP and Power Settings Will my TrainerRoad FTP sync to ROUVY? No. While workout targets are based on your TrainerRoad FTP, you'll need to manually update your FTP in ROUVY to match. This only affects the color-coding of workout blocks in ROUVY, not their actual power targets. Will my ROUVY ride count for AI FTP Detection? Yes, TrainerRoad workouts completed in ROUVY count toward AI FTP Detection. Does the sync affect my Progression Levels? Yes, workouts completed in ROUVY will update your TrainerRoad Progression Levels just like regular TrainerRoad workouts. Training in ROUVY Can I still do ERG mode workouts in ROUVY? Yes, though ERG behavior may feel slightly different than in TrainerRoad. Does drafting affect ERG mode workouts? Drafting other riders in ROUVY should have no impact on your ERG workouts. Can I use ERG mode with route resistance? No, ROUVY’s structured workout mode disables terrain resistance. Toggling ERG off in ROUVY during a workout switches to a steady resistance mode that is not impacted by terrain. Can I extend workout segments in ROUVY? No. You can’t extend your warmup and cool down in ROUVY like you do in TrainerRoad. When your structured workout ends, your workout does, too. If you’d like to ride more we recommend starting a new ROUVY activity immediately after your workout. Can I adjust the warmup/cooldown intensity? Yes! ROUVY limits intensity adjustments to 150% of the original target power, though. For higher intensities, you can exit ERG mode and shift into harder gears. What if I want to continue riding after my workout? You can’t keep riding in the same ROUVY activity after completing the structured portion. If you’d like to ride more we recommend starting a new ROUVY activity immediately after your workout. What if I complete my chosen route in ROUVY before finishing my TrainerRoad workout? If you ride to the finish of your selected route before your workout is complete, you'll automatically restart the route. Your workout will not be cut short. Post-Workout and Syncing When will my ROUVY ride appear in TrainerRoad? Rides typically sync within a few minutes. You may need to refresh the TrainerRoad app to see the completed workout. How do surveys work with ROUVY? You'll receive a survey prompt in ROUVY right after completing your workout. You can also complete the survey through the TrainerRoad app. What if I toggle RPE surveys off in ROUVY? If you click "Don't show this again" on the ROUVY postworkout RPE survey screen, you'll no longer receive the survey after your workout in ROUVY. We don't recommend doing this, because your RPE response is very important for TrainerRoad AI to optimize your training. If you do toggle them off, they can be reenabled later from the "General" section of the ROUVY app settings menu. You can also always update your survey response later by clicking the completed workout within TrainerRoad. What appears in Strava after a ROUVY workout? The activity will appear as "ROUVY - [TR Workout title]". You can edit this title in Strava without affecting the TrainerRoad sync. Will my workout visualization look different in TrainerRoad? Yes, completed ROUVY workouts show the map and elevation data rather than TrainerRoad's traditional workout profile. How do I see my workout details in TrainerRoad after completing it in ROUVY? From the calendar, click the workout name in the TrainerRoad Workout box to view the original workout description and details. What appears in my TrainerRoad calendar? Occasionally, for a few moments after completing your workout, you may see both the ROUVY activity and planned TrainerRoad workout. These will merge automatically. How do I know if a workout synced successfully? For planned workouts, the ROUVY icon will appear in the workout’s footer on your TrainerRoad calendar once it’s successfully been pushed on the day it is scheduled. The completed workout will appear in your TrainerRoad calendar with "ROUVY" noted as the source.  Additional Features Will workout instructions appear in ROUVY? Yes, for workouts that include instructions in TrainerRoad. You can check if a workout has instructions on its detail page or disable them entirely through TrainerRoad app settings. Do I need both apps open during workouts? No, you only need ROUVY running to complete your workout. TrainerRoad doesn't need to be open. Do I need to download TrainerRoad to complete workouts in ROUVY? Nope. You don’t need the TrainerRoad app to complete workouts in ROUVY. If you want to make adjustments to your TrainerRoad training plan, build a new plan, or adjust your TrainerRoad settings you can do all of these things from the website. Will outside workouts sync to ROUVY? No, only indoor versions of workouts will sync to ROUVY.  Will group rides and other calendar items sync to ROUVY? No, only structured TrainerRoad workouts will appear in ROUVY.

General Usage • Last updated on Sep 28, 2026

Training in Zwift with TrainerRoad: FAQ

Workout Availability and Access What workouts will appear in Zwift? If you are following a plan your indoor TrainerRoad workouts scheduled for today will automatically appear in Zwift. If you aren't following a plan, a recommended workout of the day will automatically appear in Zwift when you open up the app. Where do I find my workouts in Zwift? Today's workout appears in the "For You" section of the Zwift app. What if my workout doesn't appear in Zwift? First check that it is scheduled within the next two days. Any changes in TrainerRoad may take a few minutes to appear in Zwift. What happens to removed calendar workouts? Workouts removed from your TrainerRoad calendar will disappear from Zwift within about a day of their originally scheduled date. Will planned runs sync over to Zwift? No, only planned indoor cycling workouts will sync to Zwift. FTP and Power Settings Will my TrainerRoad FTP sync to Zwift? No. While workout targets are based on your TrainerRoad FTP, you'll need to manually update your FTP in Zwift to match. This only affects the color-coding of workout blocks in Zwift. Will my Zwift ride count for AI FTP Detection? Yes, TrainerRoad workouts completed in Zwift count toward both your initial 10 required workouts and ongoing AI FTP Detection. Does the sync affect my Progression Levels? Yes, workouts completed in Zwift will update your TrainerRoad Progression Levels just like regular TrainerRoad workouts. Training in Zwift Can I still do ERG mode workouts in Zwift? Yes, though ERG behavior may feel slightly different than in TrainerRoad. Power targets are rounded to the nearest watt rather than the nearest 5 watts. How does drafting affect ERG mode workouts? You may notice small power fluctuations from drafting effects. This is normal Zwift behavior and won't significantly impact your training. Why does power ramp up slower in Zwift compared to TrainerRoad? Zwift's power transitions are more gradual than TrainerRoad's. This is normal and won't significantly impact your workout quality. Can I use ERG mode with route resistance? No, Zwift's structured workout mode disables terrain resistance. For endurance rides wanting terrain feedback, consider using Zwift's pace partners instead. Can I control ERG mode through the Companion app? Yes, you can toggle ERG mode on and off and adjust intensity using the Zwift Companion app during workouts. What if I lose connection during a workout? If you experience a dropout, try adjusting the intensity +/- and then returning to 100% to reestablish ERG mode. What if I need to pause during a workout? You can pause your workout in Zwift! You can do this through the app as well as the companion app. Can I extend workout segments in Zwift? You won't be able to extend your warmup and cool down like you do in TR, but you can free-ride before starting the workout for additional warm-up and continue riding after for a longer cooldown. Can I adjust the warmup/cooldown intensity? Yes! Zwift limits intensity adjustments to 125% of the target power, though. For higher intensities, you can exit ERG mode and ride in incline mode. What if I want to continue riding after my workout? You can keep riding after completing the structured portion. The entire activity will sync back to TrainerRoad as one ride. Post-Workout and Syncing When will my Zwift ride appear in TrainerRoad? Rides typically sync within a few minutes. You may need to refresh the TrainerRoad app to see the completed workout. How do surveys work with Zwift? You'll receive a survey prompt in Zwift right after completing your workout. You can also complete the survey through the TrainerRoad app. What appears in Strava after a Zwift workout? The activity will appear as "Zwift - TrainerRoad: [workout] in [world]". You can edit this title in Strava without affecting the TrainerRoad sync. Will my workout visualization look different in TrainerRoad? Yes, completed Zwift workouts show the map and elevation data rather than TrainerRoad's traditional workout profile. How do I see my workout details in TrainerRoad after completing it in Zwift? From the calendar, click the workout name in the Source Workout box to view the original workout description and details. What appears in my TrainerRoad calendar? Initially, you may see both the Zwift activity and TrainerRoad workout. These will merge automatically, though it may take a few moments after completing the post-workout survey. How do I know if a workout synced successfully? The workout will appear in your TrainerRoad calendar with "Zwift" noted as the source. A survey prompt will appear once sync is complete. Additional Features How do I access the TrainerRoad kit in Zwift? The kit becomes available in your garage once you connect your TrainerRoad account. Check out the steps in this article here for more info on your Zwift kit: Does TrainerRoad have a Club in Zwift? Yes! We will hold regular group rides and community events and would love for you to join. You can do that here: TrainerRoad Zwift Club Can I use Zwift's route badges during workouts? Yes, you can select any route while completing your TrainerRoad workout to earn route badges and XP. Will workout instructions appear in Zwift? Yes, for workouts that include instructions in TrainerRoad. You can check if a workout has instructions on its detail page or disable them entirely through TrainerRoad app settings. Do I need both apps open during workouts? No, you only need Zwift running to complete your workout. TrainerRoad doesn't need to be open. Do I need to download TrainerRoad to complete workouts in Zwift? Nope. You don’t need the TrainerRoad app to complete workouts in Zwift. If you want to make adjustments to your TrainerRoad training plan, build a new plan, or adjust your TrainerRoad settings you can do all of these things from the website. Will outside workouts sync to Zwift? No, only indoor versions of workouts will sync to Zwift. Will group rides and other calendar items sync to Zwift? No, only structured TrainerRoad workouts will appear in Zwift.

Activity Sync • Last updated on Jun 04, 2026

How to Analyze Power Records

Power Records chart on TrainerRoad shows your best power for every duration and lets you compare any time periods side by side to see exactly how your fitness is changing. Note: The Power Records chart is available on the TrainerRoad website, not in the mobile app. What is a Power Record? A Power Record is your highest power output for a specific length of time. From your best one second power to your best two hour power, your bests are tracked for you no matter what sort of event you are training for. Power Records are earned from both indoor and outside rides. A Power Record is shown by a small trophy icon on any completed ride in your account. completed-ride-pr-trophy.jpg This completed ride has earned Power Records, shown by the small trophy icon. When you open the details of a ride, you will also see how many season specific and all time Power Records you earned in that ride. completed-ride-pr-count.jpg Total Power Record count is shown next to the season, or all time, name. Why do I have so many Power Records? Power Records are different for every athlete and rider type. The number next to the trophy icon is how many you earned during that ride. TrainerRoad calculates Power Records at intervals across your whole ride, so a single ride can set a lot of them. Each rider type cares about different durations. A sprinter watches 30 seconds and under, while an endurance rider wants to see much longer efforts. How often records are awarded depends on ride length: - 0 to 5 minutes: awarded every second - 5 to 30 minutes: awarded every 5 seconds - 30 minutes to 2 hours: awarded every 30 seconds - 2 hours and longer: awarded every 5 minutes Getting Power Records across the whole ride lets you focus on the durations that matter most to your riding. Do not be surprised by a ride with a large number of them. That is a good thing. Import your outdoor rides into TrainerRoad Sync your TrainerRoad account with Garmin Connect and/or Strava to bring in your outdoor ride history and all future outdoor rides. Outdoor power counts toward your Power Records right alongside your indoor workouts. What is the Power Records chart? The Power Records chart plots your best power for every duration as a single curve, so you can see your whole power profile at a glance and track how it changes over time. With it you can: - See your best power for any duration, from 1 second to several hours - Create custom Seasons (your own training and racing periods) to analyze - Compare up to three time periods at once: Seasons, quick ranges, or custom date ranges - Switch between average Power and Normalized Power (NP) - Focus on a duration range: Total (all durations), Sprint (1–30 sec), or Endurance (30 sec +) - Click any point to see the exact ride(s) where you set that record - Open a ride's full Ride Analysis page to dig deeper - Use SeasonMatch to compare the same weeks of two different Seasons Finding your Power Records Step One: Login to your account on the TrainerRoad website. Step Two: In the left sidebar, select Career and click Power Records. Screenshot 2026-06-15 at 2.49.22 PM.png Reading the chart Each line on the chart is one time period you've selected. The horizontal axis is duration (how long you held the power); the vertical axis is power in watts. A higher line means more power for that duration. Hover or click any point to see the watts and the ride behind it. Screenshot 2026-06-15 at 2.49.22 PM.png Power vs. Normalized Power Use the Power / NP toggle above the chart to switch what the curve shows: Power: your best average power for each duration. NP: your best Normalized Power, which accounts for the surges in a ride. Screenshot 2026-06-15 at 2.53.49 PM.png To the far right of the power filter you can also filter for duration. Total includes all power durations while sprint captures power outputs between one and thirty seconds and endurance captures anything longer than that. Screenshot 2026-06-15 at 2.55.52 PM.png Create and Manage Seasons A Season is a custom period of training and racing that you want to analyze. A month, a training block, or a race build are all custom seasons you might create. To create one, open any of the range selectors above the chart and click Seasons, and then select Manage Seasons. In the Manage Seasons panel, click + Add New Season. Screenshot 2026-06-15 at 3.00.23 PM.png From there you can give it a Season Name, set the start and end dates of the season and hit save. Seasons can cover any past, present, or future period. You can create several so you can compare your power at different points in your training. Compare up to three time periods Above the chart are three range selectors. Each one can hold: - A Season you created - A Quick Range: All Time, Year to date, Last 6 weeks, Last 90 days, or Last year - A Custom Range: any start and end date you choose (You can also limit a range to Indoor workouts only.) Select two or three ranges to overlay them and instantly see how your power compares. Screenshot 2026-06-15 at 3.04.06 PM.png See the rides behind a record Click any point on the chart to pin a tooltip for that duration, then click View Details. The View Power Records Details window opens with three tabs: Screenshot 2026-06-15 at 3.06.00 PM.png Drill Into Individual Rides From the details window, click a ride to open its full Ride Analysis page, where you can study the effort that set the record. Screenshot 2026-06-15 at 3.07.25 PM.png Power Profile Below your Records you will find your power profile with a quick view of your all time power records, power records from last year and power records from this year so far. You can hover over individual records for links to the rides with those records. Screenshot 2026-06-15 at 3.14.30 PM.png

Performance Analytics • Last updated on Aug 17, 2026

CompuTrainer

Apps Compatible with CompuTrainer The CompuTrainer will work with TrainerRoad through the "Legacy" Windows and Mac apps. CompuTrainer support is not available for iOS or Android devices. You can download the Legacy apps from the following links: Legacy Windows Download Legacy Mac Download Note: If you're a Mac user, and you're using MacOS X 10.15 (Catalina) or newer, contact us at [email protected] so we can provide instructions to download our older Legacy AIR app. Necessary Drivers for the CompuTrainer To use a CompuTrainer with TrainerRoad, you'll need to install the correct drivers first, so if you're looking to go this route reach out to [email protected] and we'd be happy to send them your way. Hardware Handlebar Unit The handlebar unit should have firmware version 43.45 or newer. This is the number that shows up on the screen when the unit is powered on. If it's older it might still work but if it doesn't, you may need to upgrade. Buttons F1/Start - Start or stop the workout Stop - Stops the workout F2 - Switches modes between Slope (gradient) and ERG (resistance changes to match target power) F3 - Enter or exit calibration mode. Once in calibration mode, spin up to the required speed on the handlebar unit and then coast. Once the new calibration value is displayed, press F3 to save the new value and resume the workout +/- buttons - In Slope mode - changes the slope up or down by 0.1 In Erg mode - changes the workout percent up or down, which increases or decreases the target watts Adapter To use your CompuTrainer with TrainerRoad, you need a USB to Stereo adapter. CompuTrainer: General Use with TrainerRoad Starting and stopping a workout Press Start on the handlebar unit to start or stop a workout. You can also use the play/pause button on the workout screen Calibration After the trainer is warmed up (5-10 minutes), it's good practice to calibrate the CompuTrainer. To calibrate, just press F3. This will pause the workout and allow you to spin up and coast down to get a new calibration number. The old number shows on the bottom and 0.00 shows up on top. After the spindown, the new number will show up on top. Press F3 to save the new number. If the number is outside the range of 2.5 to 3.5 you may want to adjust the tension on the rear wheel. Tighten to make the number go up, and loosen to make the number go down. Test Workouts During test intervals of the test workouts (8-minute test and 20-minute test), TrainerRoad will automatically switch to Slope mode at 2%. Since the goal of the test interval is to put out the highest average watts possible, you'll want to shift and/or adjust the slope up or down so you can pedal at your optimal cadence. Free Rides Since there is no watt target in a free ride, you'll automatically start at 150W. You can use the up and down arrows to adjust this by 5-watt increments. You can also use F2 (or the mode dropdown on the devices tab) to switch to Slope mode. Use the up/down arrows to adjust the slope setting in 0.1 increments. Multiple Devices If you have ANT+ or Bluetooth Smart devices paired in addition to your Computrainer, you'll see this data as well. For cadence, speed, and power, any device that sends this data will be shown and recorded instead of the Computrainer data. For example, if you have a Quarq power meter and a Computrainer paired at the same time, cadence and power will be recorded from the Quarq and speed will be recorded from your Computrainer. The Computrainer will still use its power measurements internally to set the load on the trainer in ERG mode. Troubleshooting Computrainer won't pair when the search button is pressed. Make sure you have the driver installed. Reach out to [email protected] if you don't have them. Hard coding the Port If you try to pair the device and it fails, you'll see a dropdown menu in Windows for choosing the port. Alternatively, there is a config.txt file in your Documents folder under the TrainerRoad subfolder. Open that file by double-clicking on it. Be sure to save the file and restart TrainerRoad for changes to take effect. On Windows, we search com1- com24, and on Mac, we search all of the com ports (/dev/cu.*). If this isn't working for you, find the port that your Computrainer is connected to and replace ctport="auto" in the config.txt file with your port number. On Windows, you should be able to find this in other Computrainer software or Device Manager under "Ports". For example, if it's on comm port 3 you'd change the line above to this: ctport="com3" On OSX, it's a little trickier to figure out what port the Computrainer is on. From Terminal, run ls -l /dev/cu.* to see all of the serial devices connected. By unplugging the CT you should be able to figure out which one it is. It might be something like: ctport="/dev/cu.usbserial1" Check the firmware version of the handlebar unit If it is lower than 43.45 you may need an upgrade from RacerMate. Another way to tell is if your screen always displays proE when connected to the computer. For it to work with TrainerRoad, it needs to display the calibration screen when connected to the computer. Once it is paired with TrainerRoad, the screen will switch to display "proE". Try switching between "Ergometer Mode" and "General Exercise Mode" Press reset while in the "resistance calibration program". See the CompuTrainer Manual for more details. Make sure no other CompuTrainer software is running CompuTrainer software will keep TrainerRoad from recognizing and controlling the CompuTrainer. Computrainer doesn't show up on any port on Mac OSX Try reinstalling the driver for the serial adapter. Computrainer starts acting funny or doesn't pair anymore Sometimes the DIN cables stop working. In this case, it might be worth sourcing another one to try out. CompuTrainer's Troubleshooting Resources CompuTrainer has also released a troubleshooting document that can be found at the following link: CompuTrainer Troubleshooting Document.

Smart Trainers • Last updated on Aug 20, 2026

How to Add A, B, and C Events to Your Calendar

A key component of any training plan is knowing when your events are going to take place and how you are going to prioritize them. With Calendar, you can add events at any time and TrainerRoad will adapt your plan accordingly. What Types of Events Are There? Before adding any events to your Calendar it’s first important to know the different classifications of events. As athletes, races are often very important to us. For many, it's the whole reason we train, and in an ideal world, we would roll up to each race with the ability to perform at our maximum physical potential. However, the reality is that the human body cannot maintain the optimal conditions required to perform at its absolute peak for very long. "Peaking", as we call it, requires an optimal balance of fitness and freshness, and these "stars align" for only a brief window. Through the use of our Training Plans, you'll be able to plan your season so that the "stars align" on the day that your performance is most important to you. The first step of Building your season is Event & Race Prioritization. The terminology we use for this is A, B, and C races. Below, we’ll explain how each of these types of races will fit into your season. A Race - These will be races that you will perform at your absolute peak fitness and should be events that are the most important to you. It is best to have around one or two "A" races per year. - If you have multiple A races, they should be at least 12 weeks apart in order to be in peak form for both. If you have two A races within 12 weeks of each other, we recommend prioritizing one as an A race and the other as a B race. - "A" races often have two-week tapers leading up to them, which call for a reduction in overall Training Stress resulting in an increase in freshness, all while maintaining fitness to create this elusive "Peak.” B Races - While you won’t be fully peaked for these, B races will be excellent trials of your fitness, and you can still be very competitive in them. Keep in mind that your competitors are restricted by the same human limitations as you are, so while you can’t always be in your absolute peak form, they can’t either. - While these races can be season objectives in their own right, they mostly allow you extra opportunities to try different race/nutrition strategies to see what works for you and your body. - These races can be particularly important because they build mental racing experience and confidence that you can carry into your higher-priority "A" events. - You will be given the option to add opener workouts in the days leading up to their B race when adding events using Plan Builder. C Races - These races are strictly for practice, experience, and fun. The outcomes should carry much less emotional value, and as such, you will simply "train through" them. They should hold a similar value as a key hard workout. - Keep in mind that structured work is what makes you faster, not simply riding hard all the time, and recovery is just as important. - Since these are essentially viewed as a form of training, no taper is required, and if possible, you should schedule them in the same manner as which you’d find a really tough workout, i.e., following an easy or off day. Takeaway: You can't perform at your peak physical fitness forever, so it is important to decide when you want to be your fastest and plan accordingly. How Event Priority Affects Adaptations - A Events - TrainerRoad will add a taper for the event and an opener workout the day before the event (if you've enabled this option in the Plan Builder flow). - B Events - TrainerRoad will add an opener workout the day before the event (if you've enabled this option in the Plan Builder flow). - C Events - These events are essentially training/workouts, no taper is involved so TrainerRoad will remove any scheduled workouts on this day. For more on how to prioritize your events to build a training plan, check out this Article: - How to Prioritize Your Races and Build a Seasonal Race Plan Adding an Event to the Calendar 1. To add a Race/Event to your calendar, either click on the specific day that your event will take place, or the "+ Add" button on the top right part of your screen. 2. Select "Event" from the drawer on the right of the screen. 3. Enter the pertinent information regarding the event, such as whether it's an A, B, or C event, its duration, and intensity, etc. 4. Once the event is added, you'll be prompted to adapt your plan to include the event. Select "Adapt". Editing an Existing Event in the Calendar To edit an Event, simply select it from the Calendar to open the dialogue box then click the Edit/Pencil icon. To simply move the event, you can also drag and drop the event from one day to another if, for example, it was rescheduled. After editing your Event adaptations will be prompted based on A, B & C Events prioritization. Marking an Event Complete If you import an outside ride file on the day of your event, it will automatically match that activity to the event and mark it as complete. In case that doesn't happen automatically you can also associate your event's ride file manually (see Match a Planned Workout with a Completed Workout/Ride). If you don't have a ride file for your event, you can also manually mark the event as complete by clicking on the event from the Calendar and selecting Mark as Complete. Add an Event in Plan Builder You can use Plan Builder if you'd like to build a training plan leading up to a specific event as well as add multiple events during the Plan Builder flow. To learn more about how to use Plan Builder check out this article: - Plan Builder Overview For more information on A, B, and C, races and how to prioritize them, check out the resources below! Podcast Discussion: [13:20] Podcast 134: How to Prioritize your races [31:30] Podcast 134: A, B, and C Race Definitions Further education: Peaking for Multiple "A" Races Not Enough Time Too Much Time! Related Training Articles: Peak on Race Day: 5 Questions to Plan Your Perfect Season

Calendar • Last updated on Aug 20, 2026

New Sport Types Supported with Activity Sync

New sport types show you a full look at your training history to optimize your training recommendations. With Activity Sync set up with Strava and Garmin, TrainerRoad will automatically sync any activity you upload to look beyond cycling and give you a picture of everything impacting your training. What New Sport Types are Supported? Any sport type that is supported by Strava and Garmin is now imported to TrainerRoad. Sport Type is based on the setting of the device the activity is recorded on. There are 12 new sport types: - Swim - Transition - Walk - Hike - Strength Training - Ski/Snowboard - Golf - Row - Yoga - Paddleboard - Kayak - Other (includes all other types not listed above) How Do New Sport Types Impact Workout Recommendations & Fatigue Detection? Upload any sport type to Strava/Garmin and TrainerRoad will automatically import it. TrainerRoad and Fatigue Detection immediately see those activities, and we’ll take care of any training adjustments as a result, if any. Training adjustments can come in the form of new workout recommendations and adjustments due to fatigue. In this example, there's a 3.5 hour hike that was outside this athlete's normal training regimen. Fatigue Detections notices the unexpected training and triggered a yellow day on what would've been a 90 minute Threshold interval day. Fatigue Detection delivered a reduced duration workout in the Endurance power zone instead. Screenshot 2024-07-03 at 8.53.11 AM.png How to View New Sport Types on the Calendar As long as you've already enabled a sync between Garmin and Strava, new sport types will automatically display in your Calendar. If you haven't enabled a sync between TrainerRoad and Garmin and/or Strava, you can enable Activity Sync connections here: Activity Sync New Sport Type Examples Swim Swims are separated into 2 types: 1. Lap pool swim 2. Open water swim Lap pool swim Lap pool swims include - Duration: the time you're active during your swim - Total time: the total elapsed time of your workout - Distance: total distance covered in your workout - Stroke rate: strokes per minute - Pace: your speed based on the pool units set on your device - Intervals: your totals in each interval of the workout (can comprise multiple lengths depending on the workout) lap pool HC.png Open water swim Open water swims include: - Duration: the time you're active during your swim - Total time: the total elapsed time of your workout (hover over duration to see this) - Distance: total distance covered in your workout - Stroke rate: strokes per minute - Pace: your speed based on the pool units set on your device - Intervals table: your totals in each interval of the workout Screenshot 2024-07-03 at 7.27.40 AM.png Transition Transitions are detected as part of multisport activities to isolate the time in between main sport types. Multisport activities are not confined to swim, bike, run — many devices allow you to create any multisport types. We will automatically detect types ranging from brick workouts, to duathlon, biathlon, and so on...along with any transitions in between. Screenshot 2024-07-03 at 7.48.03 AM.png Walk Walks include: - Duration: the time you're active during your walk - Total time: the total elapsed time of your workout (hover over duration to see this) - Distance: total distance covered in your workout - Heart Rate: beats per minute - Cadence: steps per minute - Pace: speed based on units set on your account (dynamically scales the graph based on average pace) - Elevation gain - Average gradient - Intervals table Screenshot 2024-07-03 at 7.41.25 AM.png Hike Hikes include: - Duration: the time you're active during your hike - Total time: the total elapsed time of your workout (hover over duration to see this) - Distance: total distance covered in your workout - Heart Rate: beats per minute - Cadence: steps per minute - Pace: speed based on units set on your account (dynamically scales the graph based on average pace) - Elevation gain - Average gradient - Intervals table Screenshot 2024-07-03 at 7.53.01 AM.png Strength Training Strength Training includes: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute Screenshot 2024-07-03 at 7.55.18 AM.png Advanced Strength Training: - Add working sets—Learn how in this support article[click]. - Organize working sets by muscle groups: - Upper body, core, lower body, & whole body - This data is intelligently used for Fatigue Detection Ski/Snowboard Ski/snowboard is detected as two types to optimize how TrainerRoad and Fatigue Detection recognize stress from these activities: 1. Backcountry ski 2. Resort ski Backcountry ski includes: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Distance: total distance covered in your workout - Heart rate: beats per minute - Speed: in the units set on your account - Elevation gain - Average gradient - Intervals table Screenshot 2024-07-03 at 7.56.24 AM.png Resort ski: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute - Speed: in the units set on your account - Intervals table Note: Metrics such as elevation gain and gradient are excluded for resort skis to account for lift time. This helps improve how TrainerRoad and Fatigue Detection view these activities. Screenshot 2024-07-03 at 7.57.23 AM.png Golf Golf includes: Duration: total elapsed time of your workout Distance: total distance covered in your workout Heart rate: beats per minute Intervals table Screenshot 2024-07-03 at 7.58.10 AM.png Row Rows are separated into 2 types: 1. Indoor row 2. Outdoor row Indoor row: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute - Intervals table Screenshot 2024-07-03 at 7.58.57 AM.png Outdoor row: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute - Stroke rate: strokes per minute - Pace: your speed based on the units set on your account - Intervals table Screenshot 2024-07-03 at 7.59.57 AM.png Yoga Yoga includes: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute Screenshot 2024-07-03 at 8.06.37 AM.png Paddleboard Paddleboard includes: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute - Stroke rate: strokes per minute - Pace: your speed based on the units set on your account - Intervals table Screenshot 2024-07-03 at 8.07.29 AM.png Kayak Kayak includes: - Duration: the time you're active during your workout - Total time: the total elapsed time of your workout (hover over duration to see this) - Heart rate: beats per minute - Speed: your speed based on the units set on your account - Intervals table Screenshot 2024-07-03 at 8.32.29 AM.png Other (includes all other types not listed above) Other is a catch-all category that includes any other sport type that isn't included above. The Other category includes: - Duration: the total elapsed time of your workout - Heart rate: beats per minute - Intervals table Screenshot 2024-07-03 at 8.11.33 AM.png FAQ Do I need to add TSS to have new sport types impact Fatigue Detection? No, adding TSS isn’t necessary for Fatigue Detection. Adding it won’t increase the accuracy, it’d just be for accounting in the TSS chart. Why isn't there a new sport type for my activity? Based on the percentages of total activities, we've created 11 major sport types. All others made up a small fraction so we folded them into a general "other" category. My activity is showing up as the wrong sport type. How can I fix it? The best way to fix a miscategorized activity is directly from the source. In Strava and Garmin, you can change sport types for an activity, download it, and manually upload into TrainerRoad from the Past Activities page on the website. Are post-workout surveys available for new sport types? Currently, surveys are not available for new sport types. I record other sport types using my Apple Watch. Can I import directly from Apple Health? You can do this today! You can sync any sport type recorded with your Apple Watch into TR using Strava as the intermediary. We have plans to allow for sync directly from Apple Health into TR, but that’s currently exclusively set up for TR Outside Workouts that are completed on the Apple Watch. Will manually created activities in Strava or Garmin Connect sync into TrainerRoad? No. We need the file from the 3rd party in order to create the activity in TR. If you need to manually add an activity, click into a day on the TR calendar and select the respective sport type or "other" category to account for that in your training.

Activity Sync • Last updated on Feb 25, 2026

What are Post Workout Surveys?

After you complete a workout, TrainerRoad asks one quick question: How did this effort feel? Your answer gives TrainerRoad AI qualitative feedback that power data alone can't capture, and it's one of the things that helps your training adapt to you. When you tell us how a workout went, and why, TrainerRoad AI can account for it instead of guessing. survey-edit-modal.png Surveys only take a few seconds. If you skip one, complete a workout offline, or ride outside, you can still add your response later. You have up to 7 days after the activity to edit a response or add one in. How Should I Answer Surveys? When it comes to surveys our biggest piece of advice is to not overthink it. Rate the overall difficulty of the entire ride, not how you expected it to feel, and not the single hardest interval. There are no right or wrong answers, and answering honestly matters more than answering "correctly." I f you catch yourself tempted to answer differently to sway your future workouts or your FTP, that's a sign you might be overthinking it or giving TrainerRoad the wrong data. We also recommend answering right after the workout while the effort is fresh in your mind. How to Rate Your Effort - 1 - Easy This ride felt easy and non-taxing, requiring little effort or focus. You could repeat the ride and pass it without issue. - 2 - Moderate This ride was somewhat comfortable but required some focus to complete. You felt a little challenged but had confidence that you could finish. If the ride had an additional set of intervals, you could complete it. - 3 - Hard This ride required effort and focus and was challenging to complete. It felt tough, and you looked forward to the ride ending. If there were an additional set of intervals, you could have done it with significant focus. - 4 - Very Hard This ride was very difficult to complete, and it tested you. If there were one more set of intervals, you wouldn't have been able to complete it. - 5 - Maximum Effort This ride was extremely difficult. It pushed you well beyond your abilities and took a massive amount of energy and focus to complete. You felt like you barely made it to the end of this ride, and that you had to pull out every mental trick in the book to finish. If you had to pause during a workout to catch your breath or adjust the power demand down, the workout was likely a maximum effort. - If a workout was a maximum effort because of external factors like illness, poor sleep, or fatigue, be sure to add that detail in the follow-up question. Follow-Up Questions Some workouts get a second question. TrainerRoad AI analyzes your ride data to decide which survey you see. If it looks like you struggled, didn't hit the workout's power targets, or ended the workout early, it asks why, and your response can confirm or correct what it detected. - If the workout looked like you struggled to finish, you'll be asked for the primary reason today's ride was challenging. - If you didn't hit the workout's power targets, you'll be asked what kept you from hitting them. - If you ended the workout early, you'll be asked what best explains why you cut it short. Depending on the situation, the reasons you can choose from include: - Time ConstraintIntensity - Too Easy - Fatigued - Under-fueled, - Poor Sleep - Stressed/Unmotivated - Sick - Injured, Equipment Issue - Heat - Menstrual Cycle - Other: with room to add your own note when none of the options fit. Pick the option that had the biggest impact on your workout. How TrainerRoad AI weighs a tough day depends on the reason: struggling because of poor sleep or under-fueling is not the same as struggling because the workout itself was too intense and a workout you cut short because you were overheating is not the same as one you cut short because you've lost fitness. If TrainerRoad AI got it wrong, say so. That's what "I didn't struggle with this workout" is for. And on outside workouts, where power data can't tell the whole story, you'll also see "I Did Not Pass" for rides that didn't go as prescribed, regardless of why. (You won't see "I Did Not Pass" on indoor workouts — indoors, TrainerRoad AI reads your power data directly and serves the right survey automatically.) Surveys for Outside Rides, Races, and Zwift Surveys aren't just for indoor workouts, you'll be asked how every ride felt, including unstructured outside rides and races. Those responses are a really important part of analyzing your fitness, especially if outside riding makes up a big share of your volume. - Outside workouts: If your ride was matched to a structured TrainerRoad workout, rate the structured portion of the ride, not the extra volume you added before or after it. And rate what you actually did: if you pushed above the targets until the effort felt hard, answer "Hard," even if the workout as originally prescribed would have felt easy. - Unstructured rides and races: just rate how the ride felt overall. An all-out race that felt brutally hard simply because racing is intense isn't a red flag about your fitness. If you get a follow-up question, "Intensity" is usually the right reason to pick. - Zwift: you'll answer the effort survey right in Zwift when you finish a TrainerRoad workout there. If TrainerRoad AI needs the struggle follow-up, you'll complete that part in the TrainerRoad app afterward. How to Add or Change an RPE Response If a survey wasn't completed right away, whether it was skipped, or the workout was completed offline or outside you can still add a response for up to 7 days after the activity. You can change an existing response in the same places: Web Step One: Open the ride from your Calendar or Activity List. Step Two: If a response is missing, you'll see a banner asking "How difficult was this workout?" Click this banner ride-analysis-missing-response.png Step Three: Pick your rating, and hit Save. If you already responded, click your rating in the "You rated this workout as:" banner. From there you can select a new rating and select Save. App Step One: Find the workout on the Calendar that you would like to add or change the RPE of. Tap the rating (or the missing-response prompt) in the workout details. Screenshot 2026-07-23 at 1.35.26 PM.png Step Two: Select or change the RPE survey and hit Save Screenshot 2026-07-23 at 1.40.13 PM.png If you receive a survey reminder email, you can also respond directly from the email by clicking the option that matches how the workout felt. Post-Workout Survey FAQs How should I respond to the survey if my effort varied over the course of the workout? Rate the ride as a whole. Even the hardest TrainerRoad workouts include rest intervals, and the end of an interval set will usually feel harder than the beginning of the set. This is all normal. The same workout might also feel different on different days depending on how you fueled or how stressful your day was. More important than what's typical or expected is how the ride actually felt to you. How do surveys help me get faster? Your responses give TrainerRoad AI context that ride data alone can't. If you're under or overshooting power targets, we look at the objective power data when analyzing your ride, but your survey tells us how that effort felt, which helps us tell the difference between a bad day, a hard-but-productive day, and a fitness change. That context feeds your upcoming workout recommendations and AI FTP Detection, and it helps keep your training appropriate for your abilities when fatigue starts to build. How important are surveys for my training? The more surveys you complete, the better TrainerRoad AI understands you as an individual, and the more personalized your recommendations become. Completing them consistently and honestly is important. You'll also build a subjective record of your training you can learn from later. Why do I occasionally see different questions on my surveys? Surveys adapt to how the workout went. If everything went to plan, you'll just get the rating question. If you lowered the intensity enough, skipped intervals, ended the workout early, or rated the effort as a maximum effort, you'll get a follow-up asking why. You may also see a follow-up when a ride was expected to be easy but you rated it hard. TrainerRoad AI just wants to know why a ride of that type was difficult. Either way, rate it how it felt. What do I do if my survey says I struggled with the workout, even though I wasn't really struggling? Select "I didn't struggle with this workout." Sometimes life happens, a phone call, a stretch break, a dropped sensor, and it can make a workout look harder than it really felt. The survey exists to clear that up. If you really did struggle, it's important to be honest about that, too. No judgment here, our only goal is to help you get faster. Will the system get confused if I take a break to stretch, fill bottles, or answer the phone? TrainerRoad AI makes allowances for short breaks between sets. If you pause during work intervals, it may read the workout as more of a challenge than you meant it to be and if it concludes you struggled when you didn't, you can override that on the survey by selecting "I didn't struggle with this workout." What if I don't have time to complete the survey? The surveys are designed to take no more than a few seconds, but if you miss one, don't worry, you can go back and complete it up to 7 days after the workout (see "How to Add or Change an RPE Response" above). What if I don't want to complete a survey? We highly recommend completing surveys so TrainerRoad AI can tailor your training. I tried to complete a missed survey but can't. What happened? You have up to 7 days after completing a workout to complete or edit its survey. We limit this window so your recollection of the effort is still fresh. That helps keep the data associated with your training trustworthy. If it's been less than 7 days and you still can't respond, shoot us an email at [email protected] and we'll investigate ASAP. When do I select "Other" as a reason? Select "Other" when you struggled or ended a workout early for a reason that isn't in the list. You can type a short note describing what happened, and it's saved with your workout. Why did I get a survey for an unstructured, outside ride? Every ride counts. Your RPE responses on unstructured outside rides are an important part of how TrainerRoad AI analyzes your fitness. Especially if outside rides make up a big share of your riding. If I complete an Outside Workout, where do I complete the survey? Sync the ride from your head unit. Then open the activity on the TrainerRoad website or in the app and add your response from the workout details (see "How to Add or Change an RPE Response" above). Should I get a Post-Workout Survey for my Ramp Test? No. This is because the Ramp Test is an all-out effort.

TrainerRoad AI • Last updated on Jul 23, 2026

What is TrainerRoad's Fatigue Detection?

TrainerRoad monitors your training to help prevent long-term fatigue and unproductive workouts. Our built in fatigue detection tells you when you might be overdoing it with Avoid Intensity days and Rest recommended days on your TrainerRoad Calendar. Screenshot 2026-01-21 at 11.08.47 AM.png What are Avoid Intensity Days? Days on your TrainerRoad Calendar will change color in response to accumulated training stress. If you are in a potentially “unproductive” range it will display an Avoid Intensity day on your Calendar. If you see a yellow highlight on your Calendar and a yellow caution sign it means we recommend slowing things down. Screenshot 2026-01-21 at 11.11.03 AM.png If you have a workout scheduled on an Avoid Intensity day TrainerRoad will adjust your scheduled workout to an Endurance workout. You will know that your workout has been adjusted because the previously planned workout will be listed behind the newly scheduled workout. Avoid Intensity days aren’t necessarily a bad thing! If you’re nearing the end of a challenging training block, or pushing your boundaries multiple days in a row (like at a training camp), you might see a few yellow highlights appear on your calendar. What are Rest Recommended Days? If you’re pushing it into long-term fatigue territory, you’ll see a Rest Recommended day on your Calendar. Rest Recommended days will display red highlights and a warning sign on your Calendar. If you have a workout scheduled on a Rest Recommended day your workout will be swapped for a rest day. You will know that your scheduled workout has been swapped because a rest day will be displayed and the previously scheduled workout will be listed in behind it. Screenshot 2026-01-21 at 11.19.01 AM.png If you try to schedule a workout on a Rest Recommended day you will be advised to keep your day open and focus on rest instead. You might see red days after big training rides, a hard race, or multiple days of challenging riding. A Rest Recommended day is a Warning sign. These days indicate that you’ve likely overdone it and adding additional stress onto this day won’t be benefitting you. When a rest day pops up on your Calendar we recommend taking the day off from all forms of training stress and focusing on recovery. Screenshot 2026-01-21 at 11.21.54 AM.png How Does it Work? TrainerRoad uses your data from all indoor and outdoor training sessions, as well as other metrics specific to you, to monitor your training. As you train, recover, and get more fit, the amount of stress you can productively manage changes. You don’t need to do anything to enable the fatigue detection! Train as you normally would, following a TrainerRoad plan, TrainNow workouts, and training outside. If a workout pushes you over the boundary of productive stress, you may see a yellow or red highlight show on your TrainerRoad Calendar for the following day. If those days have workouts scheduled, you’ll be offered a suggestion to an easier ride or a full Rest Day to prevent long-term fatigue. Can I Adjust How Cautious Fatigue Detection Is? Yes! You can directly adjust how conservative or aggressive TrainerRoad is when it comes to recommending rest. You can do this by adjusting your training approach. This can be done for your entire training approach or by zone. To learn more about making adjustments to your training approach read: How to Adjust Training Approach Overall and by Zone What Should I Do on Rest Days? Whenever possible, we recommend refraining from any type of physical exercise on rest days. We don’t recommend using these days to incorporate additional training activities like recovery cycling activities, strength training, or other forms of cross-training. For further reading on rest and how to maximize recovery we recommend checking out these Blog Posts on recovery from the TrainerRoad Blog: 1. Rest Week Nutrition: What to Eat to Recover 2. Why Rest, Recovery, and Tapering are Necessary to Get Faster 3. The Complete Recovery Week Guide for Cyclists 4. Recovery: The Elements of Getting Faster Frequently Asked Questions: Are outside activities considered by this tool? Yes! TrainerRoad considers all outside workout files imported into TrainerRoad. What kind of activities does the fatigue monitor take into account? TrainerRoad considers all activities on your Calendar. Can I decline changes prompted by red and yellow days? Just like any other recommendation that appears on your Calendar, you can decline any fatigue related adjustments. In most cases, we strongly recommend accepting these suggested changes though. TrainerRoad's AI is aiming to prevent long term fatigue and make you faster in the future Are these days bad? Yellow and Red days aren't necessarily a bad thing! In fact, it's normal to see Yellow and Red days pop up on your Calendar after pushing your limits with a hard race, a tough workout, or several big training days. Your Red and Yellow Days can become troublesome or "bad" if you are consistently training through them and ignoring TrainerRoad's suggestions. To help prevent long-term fatigue and keep your training on track we recommend accepting these suggestions whenever possible. Do I need to be following a training plan to get fatigue detections? No! TrainerRoad will notify you when you have Yellow and Red days even if you are not following a TrainerRoad training plan. Am I not training hard enough if I never get Avoid Intensity days? Not necessarily! If you are never seeing Yellow days on your Calendar, this could be an indication that you are managing your fatigue well and recovering from your training quickly. If you are never seeing a Yellow day on your Calendar and you feel you have more time and energy to dedicate to your training you might be in a good position to increase your training volume, though. How long do I need to rest after a Rest Recommended day? A day fully off the bike should be enough to ease back into your training. After really large efforts, you may see multiple red days on your Calendar followed by a Yellow day. In these cases, you want to take extra recovery and ease back into your training. What if I have a race on one of these days? Should I skip it? These aren’t necessarily a bad thing. Rather red and yellow days are meant to remind you when you are reaching or going down a path that could lead to long-term fatigue. You can still feel good and have a great race or a solid training day on a red day - just make sure you get the necessary recovery time after! If you find that you’re getting into the Yellow or Red before an A events though, you should prioritize the extra rest TrainerRoad recommends to ensure you are getting enough prior to your event. What if I get Rest Recommended during a stage race? Keep going! Stage races and training camps are situations where you’re likely going to accrue a lot of training stress which will yield yellow and maybe even red days on your Calendar. Just make sure you take the time to recover properly once it’s wrapped up. Will these appear in the desktop and mobile apps? Yes! You’ll see red and yellow days in the mobile and desktop apps. Do I have to use TrainerRoad inside for fatigue management to work? Nope! TrainerRoad works even if you only ride outside. Do my post-workout survey responses influence fatigue detection? Yes, TrainerRoad considers your post-workout surveys. Make sure to answer your post-workout RPE survey. Do my outside activities need power data to be considered by TrainerRoad? Nope! Activities that only have Heart Rate data will count if you use TrainerRoad’s Heart Rate TSS Estimation. Following my plan made my current training day Rest Recommended. Is everything working as it should be? If you’re following a TrainerRoad plan exactly as prescribed and getting into the red, that may indicate that you’ve selected too high of a plan volume. If you find yourself in a situation like this we recommend lowering your plan volume to prevent long-term fatigue. TrainerRoad wants to remove a key workout. Should I move the workout to another day? If a Rest Recommended day pops up on the same day as a workout we recommend accepting the Rest Day and focusing on your recovery. Rest days are key workouts in their own regard! Furthermore, TrainerRoad will make any necessary adjustments to your upcoming weeks of training to make sure you get the key training sessions that you need. I trained through an Avoid Intensity or Rest Recommended day. Shouldn’t this make tomorrow a yellow or Rest Recommended day too? Not necessarily! Training on a yellow or red day doesn’t automatically yield another red or yellow day in your Calendar. I feel like I need rest but there isn't an Avoid Intensity or Rest Recommended day today. What should I do? Just because you are not seeing a yellow or red day doesn’t mean you don’t need rest! Fluctuating changes in personal stress, illness, or a bad night's rest might require you take an easy day outside of TrainerRoad's recommendations. If you need to take a rest day on a non red or yellow day go ahead and skip your workout and TrainerRoad AI will make any necessary adjustments. I accepted a rest day recommendation and now I want that workout back. Can I undo it? There is no way to reverse recommendations that you have already accepted. If you’d like to recover a workout that was replaced by a rest day or an endurance workout and you can’t remember what workout was on your Calendar reach out to [email protected]. What should I do when an Avoid Intensity day appears on my Calendar? When a yellow day appears on your Calendar, and you have nothing scheduled we recommend taking the day off. If a yellow day appears when you have a workout on your Calendar you will be prompted to adjust your scheduled workout to a workout that allows for a bit more rest than your scheduled workout. What should I do when a Rest Recommended day appears on my Calendar? When a red day appears on your Calendar we recommend taking a rest day and refraining from as much physical activity as you can. What happens to Runs and Swims on Avoid Intensity and Rest Recommended Days? Swims and runs will be adjusted on these days too! If you have a run or a swim scheduled on an avoid intensity day, TrainerRoad will suggest that you do an easier swim or run on that day. If you have swim or a run on a Rest Day, TrainerRoad will suggest swapping any workouts scheduled on this day for a rest day.

TrainerRoad AI • Last updated on Mar 06, 2026

Plan Builder Overview for Triathlon

Plan Builder is a tool that creates custom plans tailored to you and your goals. Building a custom plan with Plan Builder for your triathlon is easy– and once built, your plan will automatically be applied to your calendar so that you can begin training and your plan can start adapting to you. Plan Builder Walk Through for Triathlon Plan Builder takes you through a series of steps to build you a fully tailored custom training plan for you. In Plan Builder, you add a start date, set goals and events for your schedule, and customize your plan schedule. After Plan Builder builds your plan you’ll have the option to review it before adding your new plan to you Calendar. Customizing your triathlon plan is super easy, so let’s jump into it! Step 1: Sync Your Training History TrainerRoad can pull runs, swims, and cycling activities from your Strava or Garmin Connect acccount to TrainerRoad. To ensure all of your activities are in one place during training You can sync your activity history from Garmin Connect or Strava. How to Sync All of Your Garmin Connect Activities 1. Log into TrainerRoad to access your Account Profile. 2. Select “Activity Sync” from the menu on the left-hand side of the screen. 3. Click the option to “Connect with Garmin.” 4. Authorize TrainerRoad to access your Garmin Connect account by selecting “Agree & Connect.” 5. In Garmin Connect, authorize TrainerRoad to access your Garmin Connect account and data. If you would like a more detailed walkthrough, check out this article: Garmin Connect How to Sync All of Your Strava Activities 1. Log into TrainerRoad to access your Account Profile. 2. Select "Activity Sync" from the menu on the left-hand side of the screen. 3. Under Strava, click "Connect." 4. Read through how the TrainerRoad-Strava integration works and click "Agree & Connect." 5. Enter your Strava login credentials. 6. Authorize TR to connect with your Strava account. If you would like a more detailed walkthrough, check out this article: Strava Step 2: Choose your Goal and Start Date First you will need to let Plan Builder know if you are training to prepare for a specific event or if you would like a training plan to train for a general fitness goal. Screen Shot 2024-09-12 at 3.55.34 PM.png Once you have done this you will be prompted to choose the start date of your plan. You can start a plan at any time in the future, as long as plans do not have overlapping start/end dates with other plans. Screen Shot 2024-09-12 at 3.56.44 PM.png Step 3: Add Events or Goals Once you have chosen your start date you'll be adding your events or choosing your main goal and discipline! Select the options below for more information on adding events or choosing a goal and discipline. To Prepare for an Event This is where you will add your goal events! These can be added at these three different priority levels: - A Events are your most important events of the season. Your training plan is designed to have you at your best for these events. As such, you can only have a few A events in a year. These events have a full taper before the event and recovery week after. A events should be ideally 12 weeks apart in order to be in peak form for both. - B Events can be seasonal objectives in their own right. They allow you to try different race prep and strategies to see what works for you and your body. B events receive a taper in the week of the event. - C Events are great practice and experience, but the outcome of these races should carry little value. C events will not change your plan. You can treat them like a hard workout. Screen Shot 2024-09-16 at 2.27.17 PM.png If you are unsure what races you are doing or what your final schedule is this upcoming season, no worries. You can always add events to your Calendar after your plan has been built and your plan will automatically adapt around the new additions. With that said we do recommend adding at least 1 “A” priority event to your plan, when you build your initial training plan! Unsure of how to prioritize your races? Check out this blog article for more information. General Fitness Goals If you've chosen General Fitness Goals first you will be prompted to choose the length of your plan. You can choose between a 1 month, 2 month, and 3 month plan or opt for another duration! Screen Shot 2024-09-16 at 12.40.43 PM.png Once you have done this you will prompted to choose your plans main focus by selecting your primary training discipline and your training plans primary goal: Screen Shot 2024-09-16 at 2.30.49 PM.png Step 4: Plan Volume Next you will choose your training plan volume! There are three options; Low Volume, Mid Volume, and High Volume. We recommend choosing the plan volume that you know you can consistently maintain. Screen Shot 2024-09-16 at 2.27.08 PM.png Step 5: Schedule Here in the schedule step, you will have the opportunity to customize your schedule! You can customize your training schedule in these five ways: 1. Dragging and dropping workouts: You can drag and drop workouts in the weekly schedule to the days of the week that you would prefer to complete them! Screen Shot 2024-09-16 at 2.27.48 PM.png Screen Shot 2024-09-16 at 2.47.38 PM.png 2. Changing the duration: You can change the duration of your planned cycling workouts using the time drop down for each workout Screen Shot 2024-09-16 at 2.49.03 PM.png 3. Changing the workout type: You can change your indoor structured workouts to TrainerRoad Outside Workouts, Group Rides or Solo Rides from the drop-down menu Screen Shot 2024-09-16 at 2.52.38 PM.png 4. Make it a Masters Plan You can make your plan a masters plan by toggling the switch to green in the Masters Plan. Masters plans are for any athlete who might a bit of extra recovery in their training plan! Screen Shot 2024-09-16 at 2.54.20 PM.png If you like to tinker you can also reduce the duration of workouts, or change how many intense days you have per week to get your Step 6: Name your plan and Review! Finally you can go ahead and give your training plan a name, and take the plan to review! Screen Shot 2024-09-16 at 2.28.14 PM.png You will see a breakdown of your custom training plan with details of your schedule and an overview of your plan phases and when they start, before you add the plan to your Calendar Screen Shot 2024-09-16 at 2.28.28 PM.png Your plan will be composed of these three different phases: - Base Training Phase is where it all begins. It's the foundation of cycling and triathlon success, developing resilient aerobic fitness and laying the groundwork for higher-intensity, discipline-specific training later on. The Importance of base training can't be overstated. - Build Training Phase builds discipline-specific fitness on your aerobic foundation, pushing you out of your comfort zone to Increase your sustainable workload and make you faster. - Specialty Training Phase Focuses your training on the specific demands of your goals and/or events. This is a demanding discipline-specific final block of training.

Plan Builder • Last updated on Aug 20, 2026

Plan Builder FAQs

If you don't see the answer to your Plan Builder question down below, please reach out to [email protected] for more information on Plan Builder. General What is Plan Builder - Plan Builder creates a custom training plan that brings you to peak fitness for your goal event or discipline. Plan Builder takes into consideration your goals, how much you want to train and when, all of the events on your training calendar, and the demands of your goal event to give you a truly customized training experience. Why Plan Builder? - Plan Builder accounts for all of the unique variations in your training schedule, event schedule and lifestyle that might affect the progression of your training plan. By adjusting your training plan in accordance with your needs your plan will be easier to follow and ultimately more effective. Where Do I Start? - If you don’t have a training plan, you can jump straight into Plan Builder. 1. To start constructing your custom training plan, first, go to your online career. 2. Select the Training Plans tab in the navigation menu on the left-hand side of the screen. 3. Select Build Create My Custom Plan to launch Plan Builder. Screen Shot 2025-01-16 at 11.30.13 AM.png Is Plan Builder available in the TrainerRoad app? - Athletes can build their custom Plan Builder plans via the desktop apps or the TrainerRoad Website. With that said, we recommend building your training plan on the website as the website's version of Plan Builder has added functionality. - To use Plan Builder from within the desktop app, make sure you're on the latest app version, then go to the Training Plans section of the app. How Plan Builder Works How did you come up with the recommended training volume? - The recommended training volume is based on your training approach and the amount of training you have completed in the past few weeks of training. I want to start my training plan in the past. Can I do that? - Yes! If you have already started training you can backdate the plan by selecting the date you started training this season. Why didn’t Plan Builder suggest the Base, Build and Specialty phases in order? - It is very rare that your available training time will perfectly align with the length of a Base, Build, and Specialty Phase training progression, so adjustments need to be made. When these adjustments are needed, Plan Builder uses the latest sports science research and millions of training data points to create the ideal training progression to bring you to peak fitness. Why is Plan Builder suggesting I go back to the Base Phase in the middle of my plan? - In many cases, athletes with less experience doing structured interval training benefit most by spending more time in the Base Phase. Additionally, a mid-season return to base training can allow the body to recover from more strenuous forms of training, and reach new heights by entering a base phase with a higher FTP. Why is Plan Builder suggesting I go to a Specialty Phase in the middle of my plan? - Plan Builder strategically uses different training phases to increase fitness and freshness in order to make you as fast as possible for your goal event. In many cases, the Specialty Phase can be a great opportunity for the body to increase freshness without losing fitness. This is particularly true for athletes with a lot of experience doing interval training and serves as a great mid-season reset point for any rider, especially during long training progression Why is Plan Builder suggesting I do more than one Build Phase? - Athletes that have a moderate level of experience with interval training can benefit from more time spent in the Build Phase to fully reach their potential. Doing too many weeks in a row of Build training can be extremely fatiguing, so Plan Builder will split up excessively long Build Phases with a Base or Specialty Phase. Events What if I don’t have any goal events? - No events, no problem! If you aren't training for an event you can build a goal Based training plan. What if I have multiple priority events? - You can add as many C events and B events as you’d like, but A events (priority events) must be spaced eight weeks apart. Anything less than 8 weeks between goal events won’t allow you enough time to recover and rebuild sufficiently to reach peak fitness once again. - If you have two priority events within 8 weeks of each other, evaluate which event is not as important and make one event an A event and the other event a B event. You will still have rest allocated before the B event but you will only have a taper and a peak for the A event. What if my priority event is a multi-day event? - If you are training for a multi-day event, mark your event as a ‘Stage Race’ when you categorize the discipline of your event My stage race includes multiple disciplines. Which should I choose for "targeted discipline" - Mark the event you’d like to prioritize as the targeted discipline. You’ll taper for the entire stage race, but your Specialty training will be geared towards your targeted discipline. What if I already have events on my Calendar? - If you already have events on your TrainerRoad calendar Plan Builder will accommodate these events. If you’d like to start fresh you can delete the current events on your Calendar and add them when you use Plan Builder. For more information on how to delete events check out this help center article: Editing Your Calendar What if I need to add events later on? - New events can be added at any time. If you would like to add additional events to your TrainerRoad Calendar go ahead and check out this help center article: Add A/B/C Priority Events What if my goal event is more than a year away? - Plan Builder will create a training plan for any event within two years of the day you’ll start training. What do you mean by A, B and C Events? - Categorizing your events as A, B and C events is an easy way to prioritize the importance of your events. For more information on prioritizing events go ahead and check out this help center article: Prioritizing Races (A, B & C Races) Do I need an A Event for Plan Builder? - If you plan on racing, at least one of your events should be an A-priority event. If you aren’t sure which event you would like to make your A event check out this help center article on prioritizing events: Prioritizing Races (A, B & C Races) What if I want to train for a whole series of events instead of just one event? - If you are training for an entire series, we still recommend you make one event within that series an A race, and marking the rest as B races. This will allow Plan Builder to bring you to peak fitness. Plan Builder will build in tapers, rest and openers around the existing events, so your training will be kept on track. I don’t know what sort of event my race is. What should I pick? - If you don’t know what sort of event your race is, select the discipline that is closest to the type of event you plan on racing. I am training for a time trial distance other than 40k. Does Plan Builder work for that? - Yes. When creating the event, enter the event duration and intensity and Plan Builder will take care of the rest. Adjusting Your Custom Plan What if I need to take time off? - When you need to take time off you can edit your Calendar to adjust for time spent off the bike. For detailed instructions on how to edit your training plan check out this help center article: Editing Your Calendar What if I have already started training? - You can use Plan Builder even if you are in the middle of a training plan right now. First, you will want to delete your current training plan from your Calendar. For detailed instructions on how to delete a custom training plan check out this help center article: Delete/Unschedule a TrainerRoad Plan - When you add your custom plan to your TrainerRoad Calendar go ahead and choose the day you started training for your current season. When your custom plan is added to your Calendar, it will include the workouts you have already completed this season. How do I start over, clear my calendar, and create a new Plan Builder plan? - If you already have a training plan added to your TrainerRoad Calendar you will want to delete (or unschedule) this training plan before you build your new custom plan. Note that this will only delete planned workouts - any workouts you have completed will be saved. For detailed instructions on how to delete a custom training plan check out this help center article: Delete/Unschedule a TrainerRoad Plan What happens to my current training rides if I delete/unschedule my current training plan? - When you delete your current training plan to add a custom plan all of your completed workouts will remain on your Calendar. What happens to my A/B/C priority events if I delete my new plan? - If you delete a plan created through Plan Builder, any events that you added to your calendar via that plan will remain on your calendar. If you create a new plan, you can add these events to your plan by clicking the "Include" button in the Existing Events section of Plan Builder. Should I take the Ramp Test before I start Plan Builder? - The Ramp Test will automatically be the first workout in any training phase or plan. If you are just starting a TrainerRoad plan, we definitely recommend starting off with this workout. If you have recently completed a Ramp Test in another training plan you can skip this Ramp Test at your own discretion. I don’t have much time until my goal event. Can Plan Builder create a training plan on a short timeline? - Absolutely! Plan Builder will build a training plan for your goal event, as long as you have at least one week until the event. I want to train on different days than Plan Builder suggests. Can I change that? - Definitely. You can customize the schedule of your training week during the "Schedule" section of creating the plan. Simply drag and drop your training days. Can I decide which days I want to train outside? - Yes! When you create the schedule for your training plan you can mark specific days in your training week as outside rides. You can do this one by one, or adjust this per training block when building your custom plan. After your plan is made, you can change any workout to be an outside or inside workout on the fly. Can I change my training volume halfway through my plan? - You can change the number of days in your training plan at any point after Plan Builder has made your custom training plan. To change the training volume of your plan after it has been built, follow these steps: 1. Go to your online career. 2. Select the Calendar tab in the menu on the left-hand side of the screen. 3. Navigate to your current training block, or the block you are about to start. 4. Select the Block on your Calendar: 5. In the menu that appears on the right select 'Edit Weekly Schedule' 6. Adjust your training schedule in the subsequent steps. Can I make changes to my training plan once I’ve added it to my calendar? - Absolutely, your training plan can always be edited. You can add additional events, swap workouts, edit training weeks and even delete workouts. For detailed instructions on how to edit your Calendar go ahead and check out this article: Editing Your Calendar

Plan Builder • Last updated on Aug 20, 2026