Home Search Results

9 results for “How to Complete TrainerRoad Workouts in Zwift”

Found 9 results

Importing Activities Into TrainerRoad

Athletes often want their training data all in one place. Bring your workouts, rides, and other activities together by syncing Strava, Garmin, and TrainingPeaks to your TrainerRoad account. Automatically Import Your Activities Automatically importing activities is the easiest way to import activities into trainerRoad. In order to allow TrainerRoad to automatically import your activities, you'll need to sync your TrainerRoad account with a third-party platform like Strava, Garmin Connect, or Zwift. You can manage and see all of the available third-party connections in the Connections section of your Account settings in TrainerRoad, located here: TrainerRoad: Activity Sync For a complete breakdown of the third party platforms you can sync with and how to sync with them check out: Syncing TrainerRoad with Third Party Platforms Screen Shot 2025-02-12 at 9.59.04 AM.png Once you've enabled Activity-Sync, TrainerRoad will automatically import all future activities into TrainerRoad from that source. At the time Activity-Sync is set up, TrainerRoad will also import your activity history from Strava and Garmin Connect - Strava: TrainerRoad will import your entire history - Garmin Connect: TrainerRoad will import the latest 5 years of your activity history. However, you can manually upload activities from GC older than this. Check out the instructions below. (Note: After you enable Activity-sync, you will need to complete one more Garmin Connect activity to prompt the app to push your last 5 years to TrainerRoad.) In TrainerRoad, the source of your activity file will be displayed in the Activity Details page at the bottom of the workout details. Screen Shot 2025-02-12 at 10.02.48 AM.png Manually Import Your Activities From your online TrainerRoad Career, select 'Activities List' from the left-hand navigation. Select the Import Activity button to manually upload your activities. We support .fit, .tcx, .gpx, .pwx and .zip files. If your activity file is one of the supported file types and you’re having trouble getting it to upload, reach out to [email protected] and we’ll help you out!

Performance Analytics • Last updated on Aug 20, 2026

How to Use TrainerRoad AI Workouts

You can use TrainerRoad AI Workouts to train flexibly without a plan or add additional training to your plan. Each AI Workout is selected by TrainerRoad AI based on your workout history and predicted performance. What Are TrainerRoad AI Workouts? AI Workouts are one-off, intelligently chosen sessions that you can add to your TrainerRoad Calendar. AI selected workouts are chosen from the TrainerRoad library based on your recent training and predicted performance. You can add them to any day on your calendar to get a workout that fits your needs for that day. When you go to add an AI Workout to your Calendar a workout will be chosen for you based on this criteria: 1. Duration: Pick how long you want to ride for that day 2. Focus or Discipline: Choose a type of workout that matches your goals or the type of training you'd like to complete that day. Workouts are broken into Category and Zone. Category options include: Endurance, Climbing, Attacking, Criteriums, Zwift Racing, Group Rides, Cyclocross, Mountain Biking or Time Trialing Zone options include: Endurance, Tempo, Sweet Spot, Threshold, VO2 Max and Anaerobic 3. Interval Structure: Within each category of riding workouts will be broken into interval types. Choose the interval type that you would like to complete. 4. Inside or Outside: Before scheduling your workout you will have the option to choose whether you would like to complete the workout inside or outside. How to Add an AI Workout Step One: Open your Calendar (web or mobile) and select the + Add button in the upper right hand corner of the screen. Step Two: In the cycling category choose TrainerRoad AI Workout Screen Shot 2025-10-14 at 11.38.45 AM.png Step Three: Choose whether you would like to choose a workout based on Category or Zone Screen Shot 2025-10-14 at 11.41.36 AM.png Step Four: Set your ride length in the drop down Screen Shot 2025-10-14 at 11.42.50 AM.png Step Five: Scroll to the training focus (e.g., Endurance, Climbing, Attacking, Time Trial, Criterium, Cyclocross, Mountain Bike, Gravel, Zwift Race, Group Ride) or the zone (Endurance, Tempo, Sweet Spot, Threshold, VO2 Max and Anaerobic) that you would like to select a ride from Step Six: Choose the zone and type of interval structure you would like to complete and select this option Screen Shot 2025-10-14 at 11.44.00 AM.png Step Seven: Review the details of the type of workout you are selecting and click Schedule.

TrainerRoad AI • Last updated on Jan 21, 2026

Syncing Zwift with TrainerRoad

You can complete scheduled or recommended TrainerRoad cycling workouts in Zwift when you connect your Zwift account to your TrainerRoad account. Here’s how to get the sync between the two platforms set up: How to Connect Zwift and TrainerRoad You'll establish a connection between the two platforms through the TrainerRoad website: Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms Step Two: Select Connect under Zwift Screen Shot 2025-02-07 at 3.16.24 PM.png Step Three: Read and Agree to the connection terms Screen Shot 2025-01-29 at 11.56.09 AM.png Step Four: This will bring you to the Zwift login page. Login to your Zwift account here. Screen Shot 2025-01-29 at 11.57.16 AM.png Step Five: Grant access privileges between Zwift and TrainerRoad Screen Shot 2025-01-29 at 11.58.59 AM.png You have successfully synced Zwift and TrainerRoad! To confirm that the connection has been made successfully, a green border and an option to disconnect will now appear in the Zwift option on your TrainerRoad ‘Training Platforms’ page. Screen Shot 2025-01-29 at 12.00.55 PM.png What Syncs Between the Two Platforms? Upcoming TrainerRoad Workouts: Today's planned TrainerRoad cycling workout will be pushed to Zwift. This only includes cycling workouts! Planned runs will not be pushed into Zwift. Note: Ramp Tests and FTP tests will not sync to Zwift! All other indoor workouts scheduled today will be sent over to Zwift on the day that they are scheduled. Completed Zwift Activities: Workouts completed in Zwift will be pulled back into TrainerRoad. This includes run and cycling workouts! When are Workouts Synced Between Platforms? TrainerRoad Workouts: TrainerRoad Workouts scheduled for today will be pulled into Zwift almost as soon as they are scheduled. If you aren't seeing today's planned workout in the For You section of the Zwift you might not have anything scheduled for today. Completed Zwift Activities: Workouts completed in Zwift after establishing a connection between Zwift and TrainerRoad will be synced to TrainerRoad shortly after ending the workout. This sync may take a few minutes. Historical training data in Zwift won't be pulled into TrainerRoad. How to Disconnect Zwift and TrainerRoad Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms Step Two: Select Disconnect below Zwift and then Disconnect to confirm the change. Screen Shot 2025-02-07 at 2.45.12 PM.png You have successfully disconnected Zwift and TrainerRoad! You can re-enable the connection at any time by following the steps above.

Activity Sync • Last updated on May 26, 2026

Syncing TrainerRoad With Third-Party Platforms

You can manage and see all of the available third-party connections in the Connections section of your Account settings in TrainerRoad, located here: TrainerRoad: Activity Sync From this page you can add new connections, disconnect from platforms you've connected to, and re-authorize or adjust connection settings when necessary. Screen Shot 2025-02-07 at 9.35.17 AM.png Compatible Platforms You can connect your TrainerRoad account to a number of third party platforms. Functionality with these platforms varies depending on the platform you are connecting to. See the list below for a full break down of each platforms compatibility with TrainerRoad! Zwift How to Set up Sync with Zwift - Upcoming TrainerRoad Workouts: Sync Todays planned TrainerRoad cycling workouts to Zwift to be completed in Zwift - Completed Zwift Activities: Workouts completed in Zwift will be pulled back into TrainerRoad. Garmin How to Set up Sync with Garmin Connect - Garmin Training History: TrainerRoad will pull in up to five years worth - Garmin Activity: Activities completed on your Garmin and uploaded to Garmin Connect will be pulled into TrainerRoad. - TrainerRoad Outside Workouts: Today's scheduled Outside TrainerRoad workouts will be pushed to your Garmin Connect account to be completed on your Garmin. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Garmin Connect. Strava How to Set up Sync with Strava - Strava Training History: TrainerRoad will pull in all of your public and private activities on Strava - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Strava. Wahoo How to Setup Sync with Wahoo - TrainerRoad Outside Workouts: Today's Planned Outside TrainerRoad workouts will be pushed to your Wahoo account to be completed outside on your Wahoo. Hammerhead How to Set up Sync with Hammerhead - TrainerRoad Outside Workouts: Today's Planned Outside TrainerRoad workouts will be pushed to your Hammerhead account to be completed outside on your Hammerhead. TrainingPeaks How to Set up Sync with Training Peaks - Planned TrainingPeaks Workouts: Compatible planned indoor workouts in TrainingPeaks will be imported so that they can be completed in TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Strava. Apple How to Set up Sync with Apple Watch - TrainerRoad Outside Workouts: Planned Outside TrainerRoad workouts will be pushed to your Apple watch. Final Surge How to Set up Sync with Final Surge - Planned FinalSurge Workouts: Planned Final Surge sessions will be imported into TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Final Surge. TriDot How to Set up Sync with TriDot - Planned TriDot Workouts: Planned TriDot sessions will be imported into TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to TriDot. Dropbox How to Set up Sync with Dropbox - Completed TrainerRoad Workout Files: Completed workout files will be saved to Dropbox.

Activity Sync • Last updated on Feb 18, 2026

How to Add Zwift Races to Your TrainerRoad Calendar

You can add a Zwift race to any day in your Calendar, swap any planned workout on your Calendar for a Zwift race, or schedule a reoccurring Zwift races in the schedule step of Plan Builder. How to Add a New Zwift Race to your Calendar Step One: Go to the TrainerRoad Calendar on the TrainerRoad website Step Two: Select the Add button in the right hand corner of the Calendar Screenshot 2026-04-13 at 12.03.03 PM.png Step Three: Choose Zwift Race from the menu that appears Screenshot 2026-04-13 at 12.01.38 PM.png Step Four: Fill out the details for your Zwift Race and add it to your Calendar! When you click on the Zwift race on your Calendar the details you've entered here and the option to mark it as complete will appear. Screenshot 2026-04-13 at 12.06.50 PM.png How to Swap a Workout on your Calendar for a Zwift Race Whether you are swapping todays workout to a Zwift race, or you want to schedule a Zwift race in advance, you will want to do this from the TrainerRoad calendar. Here's how to add an ad-hoc Zwift race to your Calendar: Step One: Go to your TrainerRoad Calendar Step Two: Right click on the workout that you would like to make a Zwift race and select Zwift Race' Screenshot 2026-04-13 at 12.08.15 PM.png Step Three: If you'd like to complete this race on a different day than the workout was originally scheduled, drag and drop the scheduled Zwift race to that day! How to Schedule Reoccurring Zwift Races If you have a weekly Zwift race that you would like to add to your TrainerRoad plan, you'll need to do this through the scheduling step of Plan Builder. Here's how to access this plan and add in Zwift races for an existing plan or a brand new plan. Adding to a New Plan You can add reoccurring workouts to a new TrainerRoad plan in the schedule step of Plan Builder. Here's how! Step One: Begin building your custom plan with Plan Builder, following the steps until you reach 'Training Schedule' Step Two: When you reach the Training Schedule' drag and drop one of your hard interval workouts to the day that you would like to complete the Zwift race. Step Three: Select the drop down menu for that day. In the drop down menu select Zwift Race Screenshot 2026-04-13 at 12.10.08 PM.png Step Four: Finish building your plan with Plan Builder and add the plan to your Calendar. You will now see Zwift races schedule on your plan! Note: Zwift races won't be scheduled during recovery weeks. We recommend taking these weeks off from Zwift racing so that you can fully recover from training! Adding to an Existing Plan To add reoccurring Zwift workouts to an existing TrainerRoad plan you'll need to edit your current weekly schedule. Here's how to do this Step One: Go to your TrainerRoad Calendar Step Two: Find any training phase annotation and click on it Step Three: In the menu that appears hover over Training Days and hit 'Edit Weekly Schedule' Step Four: When you reach the Training Schedule' drag and drop one of your hard interval workouts to the day that you would like to complete the Zwift race. Step Five: Select the drop down menu for that day. In the drop down menu select Zwift Race Step Four: Finish building your plan with Plan Builder and add the plan to your Calendar. You will now see Zwift races schedule on your plan! Note: Zwift races won't be scheduled during recovery weeks. We recommend taking these weeks off from Zwift racing so that you can fully recover from training!

Calendar • Last updated on Apr 13, 2026

Training in Zwift with TrainerRoad: FAQ

Workout Availability and Access What workouts will appear in Zwift? If you are following a plan your indoor TrainerRoad workouts scheduled for today will automatically appear in Zwift. If you aren't following a plan, a recommended workout of the day will automatically appear in Zwift when you open up the app. Where do I find my workouts in Zwift? Today's workout appears in the "For You" section of the Zwift app. What if my workout doesn't appear in Zwift? First check that it is scheduled within the next two days. Any changes in TrainerRoad may take a few minutes to appear in Zwift. What happens to removed calendar workouts? Workouts removed from your TrainerRoad calendar will disappear from Zwift within about a day of their originally scheduled date. Will planned runs sync over to Zwift? No, only planned indoor cycling workouts will sync to Zwift. FTP and Power Settings Will my TrainerRoad FTP sync to Zwift? No. While workout targets are based on your TrainerRoad FTP, you'll need to manually update your FTP in Zwift to match. This only affects the color-coding of workout blocks in Zwift. Will my Zwift ride count for AI FTP Detection? Yes, TrainerRoad workouts completed in Zwift count toward both your initial 10 required workouts and ongoing AI FTP Detection. Does the sync affect my Progression Levels? Yes, workouts completed in Zwift will update your TrainerRoad Progression Levels just like regular TrainerRoad workouts. Training in Zwift Can I still do ERG mode workouts in Zwift? Yes, though ERG behavior may feel slightly different than in TrainerRoad. Power targets are rounded to the nearest watt rather than the nearest 5 watts. How does drafting affect ERG mode workouts? You may notice small power fluctuations from drafting effects. This is normal Zwift behavior and won't significantly impact your training. Why does power ramp up slower in Zwift compared to TrainerRoad? Zwift's power transitions are more gradual than TrainerRoad's. This is normal and won't significantly impact your workout quality. Can I use ERG mode with route resistance? No, Zwift's structured workout mode disables terrain resistance. For endurance rides wanting terrain feedback, consider using Zwift's pace partners instead. Can I control ERG mode through the Companion app? Yes, you can toggle ERG mode on and off and adjust intensity using the Zwift Companion app during workouts. What if I lose connection during a workout? If you experience a dropout, try adjusting the intensity +/- and then returning to 100% to reestablish ERG mode. What if I need to pause during a workout? You can pause your workout in Zwift! You can do this through the app as well as the companion app. Can I extend workout segments in Zwift? You won't be able to extend your warmup and cool down like you do in TR, but you can free-ride before starting the workout for additional warm-up and continue riding after for a longer cooldown. Can I adjust the warmup/cooldown intensity? Yes! Zwift limits intensity adjustments to 125% of the target power, though. For higher intensities, you can exit ERG mode and ride in incline mode. What if I want to continue riding after my workout? You can keep riding after completing the structured portion. The entire activity will sync back to TrainerRoad as one ride. Post-Workout and Syncing When will my Zwift ride appear in TrainerRoad? Rides typically sync within a few minutes. You may need to refresh the TrainerRoad app to see the completed workout. How do surveys work with Zwift? You'll receive a survey prompt in Zwift right after completing your workout. You can also complete the survey through the TrainerRoad app. What appears in Strava after a Zwift workout? The activity will appear as "Zwift - TrainerRoad: [workout] in [world]". You can edit this title in Strava without affecting the TrainerRoad sync. Will my workout visualization look different in TrainerRoad? Yes, completed Zwift workouts show the map and elevation data rather than TrainerRoad's traditional workout profile. How do I see my workout details in TrainerRoad after completing it in Zwift? From the calendar, click the workout name in the Source Workout box to view the original workout description and details. What appears in my TrainerRoad calendar? Initially, you may see both the Zwift activity and TrainerRoad workout. These will merge automatically, though it may take a few moments after completing the post-workout survey. How do I know if a workout synced successfully? The workout will appear in your TrainerRoad calendar with "Zwift" noted as the source. A survey prompt will appear once sync is complete. Additional Features How do I access the TrainerRoad kit in Zwift? The kit becomes available in your garage once you connect your TrainerRoad account. Check out the steps in this article here for more info on your Zwift kit: Does TrainerRoad have a Club in Zwift? Yes! We will hold regular group rides and community events and would love for you to join. You can do that here: TrainerRoad Zwift Club Can I use Zwift's route badges during workouts? Yes, you can select any route while completing your TrainerRoad workout to earn route badges and XP. Will workout instructions appear in Zwift? Yes, for workouts that include instructions in TrainerRoad. You can check if a workout has instructions on its detail page or disable them entirely through TrainerRoad app settings. Do I need both apps open during workouts? No, you only need Zwift running to complete your workout. TrainerRoad doesn't need to be open. Do I need to download TrainerRoad to complete workouts in Zwift? Nope. You don’t need the TrainerRoad app to complete workouts in Zwift. If you want to make adjustments to your TrainerRoad training plan, build a new plan, or adjust your TrainerRoad settings you can do all of these things from the website. Will outside workouts sync to Zwift? No, only indoor versions of workouts will sync to Zwift. Will group rides and other calendar items sync to Zwift? No, only structured TrainerRoad workouts will appear in Zwift.

Activity Sync • Last updated on Jun 04, 2026

How to Complete TrainerRoad Workouts in Zwift

You can complete TrainerRoad cycling workouts in Zwift when you connect your Zwift account to your TrainerRoad account. Here’s how to get set up and started. Screen Shot 2025-02-07 at 4.38.58 PM.png Getting Started To complete TR rides on Zwift you will need the following: - An active TrainerRoad subscription - An active Zwift subscription - The latest version of Zwift on the device you train on. If you don’t have the Zwift app you can download it for Mac, iOS, PC, and Android here: Zwift Download Step One: Connect Zwift and TrainerRoad You'll establish syncing between the two platforms through the TrainerRoad website: Step One: Navigate to Training Platforms section of the Connections page on TrainerRoad website: Account > Connections > Training Platforms Step Two: Select Connect under Zwift Screen Shot 2025-02-07 at 3.16.24 PM.png Step Three: Read and Agree to the connection terms Screen Shot 2025-01-29 at 11.56.09 AM.png Step Four: This will bring you to the Zwift login page. Login to your Zwift account here. Screen Shot 2025-01-29 at 11.57.16 AM.png Step Five: Grant access privileges between Zwift and TrainerRoad. Screen Shot 2025-01-29 at 11.58.59 AM.png To confirm that the connection has been made successfully, a green border and an option to disconnect will now appear around the Zwift tile on your TrainerRoad ‘Training Platforms’ page. Get Your TrainerRoad Kit in Zwift! Once you have paired your TrainerRoad account with your Zwift account you will have access to the TrainerRoad kit in Zwift. Here’s how you can get this kit! Step One: Open the Zwift app and navigate to the home page. Step Two: Select the Zwift Garage Screen Shot 2025-02-09 at 10.13.29 AM.png Step Three: Select Jersey Screen Shot 2025-02-09 at 10.14.47 AM.png Step Four: Scroll down to the TrainerRoad kit and tap on it. You're ready to go! Screen Shot 2025-02-09 at 10.15.35 AM.png Step Two: Choose how you Want to Ride What gets imported into Zwift will change depending on whether you have scheduled workouts in your TrainerRoad calendar or not. Here are the two main options for completing TR rides in Zwift and how they work in Zwift. Follow a Plan If you are training for a race or an event we recommend following a training plan. When you are following a TrainerRoad plan workouts scheduled on your Calendar will automatically be pulled into Zwift on the day that it is scheduled. If you haven’t added a plan to your calendar and would like to follow a custom training plan check out this article to get started: Plan Builder Overview Get a Recommended Workout Everyday No plan, no worries! TrainerRoad will automatically send a recommended workout of the day over to Zwift when you aren't following a plan. When you want to do a ride just open up the Zwift app and today's recommended workout will appear in the For You tab on your Zwift home page. The only time you won't get a recommended daily workout is when you have a recommended rest day. To learn more about recommended rest days check out: Red Light Green Light Step Three: Complete your TrainerRoad Workout in Zwift! After you have established the connection between the two platforms and decided how you want to train you are ready to ride. Here is how to access and complete your TrainerRoad workout in Zwift: Step One: Open the Zwift app and log in to your Zwift account. Step Two: Select Let’s Go in the bottom right-hand corner of the screen Step Three: Connect to your power source and any other devices you’d like to have during your training. Screen Shot 2025-02-09 at 10.46.45 AM.png Screen Shot 2025-02-09 at 10.47.11 AM.png Step Four: If you have a TrainerRoad workout scheduled today it will appear on the Home Page in the first slot under For You. Select this workout to open it! Screen Shot 2025-02-09 at 10.49.56 AM.png Step Five: Hit 'Start Ride' Screen Shot 2025-02-09 at 10.50.50 AM.png Step Six: Select the location of your ride and select ‘Start Workout’ Screen Shot 2025-02-09 at 10.52.54 AM.png Step Seven: Start Pedaling to begin your workout! Your upcoming intervals will appear on the left-hand side of the screen. TrainerRoad Workout Folder If your workout is scheduled for tomorrow, or you have multiple rides scheduled today, you might not see the ride you are looking for in the For You tab. Here’s how to find these other workouts: Step One: In the Zwift app, select the Workouts tab in the upper right navigation menu. Step Two: Select Custom in the right-hand navigation tab Step Three: Select the TrainerRoad folder Screen Shot 2025-02-09 at 11.05.46 AM.png Step Four: Select the workout you would like to complete! Screen Shot 2025-02-09 at 11.07.28 AM.pngIf you aren’t seeing any workouts in this folder this means there aren’t any workouts scheduled for today or tomorrow. Scheduling a workout for today or moving a workout to today in your training plan will push that workout to Zwift. After the Ride If you'd like to continue riding longer than your prescribed workout, you can simply keep riding! Post-Workout Surveys After you complete your ride you will be prompted to fill out a survey rating your effort. Rate the perceived effort of your ride with 1 being Easy and 10 being an maximum effort. Screen Shot 2025-02-07 at 4.51.14 PM.png If you miss this survey you'll get an e-mail from TrainerRoad. You can respond to the missed surveys through e-mail. You can also update your survey response directly in TrainerRoad at any time. For steps on how to do this check out: Post Workout Surveys Your Next Workout If you aren't following a plan - no need to do anything else! You will automatically get a recommended workout of the day next time you open up the Zwift app. If you are following a training plan your next workout will also appear in the For You tab when you open the app on the day it is scheduled. The only difference is after you complete your TrainerRoad workout, changes may be made to your next workout! If you are following a plan changes prompted by your recently completed workout will be automatically applied to upcoming workouts. If a change is made to your next workout, you will get an e-mail from TrainerRoad with the details of the change when you are opted into adaptation updates. Ride Sync Your completed ride will automatically sync to TrainerRoad once you have ended the workout. If you'd like your completed workout to sync to any other platforms, like as Strava, you will need to enable third-party syncing through Zwift. For instructions on how to connect third-party syncing with Zwift, check out these help center articles: Zwift: Third Party Syncing Frequently Asked Questions For more information and answers to Frequently Asked Questions about Zwift and TrainerRoad check out our FAQ: Training in Zwift with TrainerRoad: FAQ

Activity Sync • Last updated on Apr 22, 2026

What are Post Workout Surveys?

After you complete a workout, TrainerRoad asks one quick question: How did this effort feel? Your answer gives TrainerRoad AI qualitative feedback that power data alone can't capture, and it's one of the things that helps your training adapt to you. When you tell us how a workout went, and why, TrainerRoad AI can account for it instead of guessing. survey-edit-modal.png Surveys only take a few seconds. If you skip one, complete a workout offline, or ride outside, you can still add your response later. You have up to 7 days after the activity to edit a response or add one in. How Should I Answer Surveys? When it comes to surveys our biggest piece of advice is to not overthink it. Rate the overall difficulty of the entire ride, not how you expected it to feel, and not the single hardest interval. There are no right or wrong answers, and answering honestly matters more than answering "correctly." I f you catch yourself tempted to answer differently to sway your future workouts or your FTP, that's a sign you might be overthinking it or giving TrainerRoad the wrong data. We also recommend answering right after the workout while the effort is fresh in your mind. How to Rate Your Effort - 1 - Easy This ride felt easy and non-taxing, requiring little effort or focus. You could repeat the ride and pass it without issue. - 2 - Moderate This ride was somewhat comfortable but required some focus to complete. You felt a little challenged but had confidence that you could finish. If the ride had an additional set of intervals, you could complete it. - 3 - Hard This ride required effort and focus and was challenging to complete. It felt tough, and you looked forward to the ride ending. If there were an additional set of intervals, you could have done it with significant focus. - 4 - Very Hard This ride was very difficult to complete, and it tested you. If there were one more set of intervals, you wouldn't have been able to complete it. - 5 - Maximum Effort This ride was extremely difficult. It pushed you well beyond your abilities and took a massive amount of energy and focus to complete. You felt like you barely made it to the end of this ride, and that you had to pull out every mental trick in the book to finish. If you had to pause during a workout to catch your breath or adjust the power demand down, the workout was likely a maximum effort. - If a workout was a maximum effort because of external factors like illness, poor sleep, or fatigue, be sure to add that detail in the follow-up question. Follow-Up Questions Some workouts get a second question. TrainerRoad AI analyzes your ride data to decide which survey you see. If it looks like you struggled, didn't hit the workout's power targets, or ended the workout early, it asks why, and your response can confirm or correct what it detected. - If the workout looked like you struggled to finish, you'll be asked for the primary reason today's ride was challenging. - If you didn't hit the workout's power targets, you'll be asked what kept you from hitting them. - If you ended the workout early, you'll be asked what best explains why you cut it short. Depending on the situation, the reasons you can choose from include: - Time ConstraintIntensity - Too Easy - Fatigued - Under-fueled, - Poor Sleep - Stressed/Unmotivated - Sick - Injured, Equipment Issue - Heat - Menstrual Cycle - Other: with room to add your own note when none of the options fit. Pick the option that had the biggest impact on your workout. How TrainerRoad AI weighs a tough day depends on the reason: struggling because of poor sleep or under-fueling is not the same as struggling because the workout itself was too intense and a workout you cut short because you were overheating is not the same as one you cut short because you've lost fitness. If TrainerRoad AI got it wrong, say so. That's what "I didn't struggle with this workout" is for. And on outside workouts, where power data can't tell the whole story, you'll also see "I Did Not Pass" for rides that didn't go as prescribed, regardless of why. (You won't see "I Did Not Pass" on indoor workouts — indoors, TrainerRoad AI reads your power data directly and serves the right survey automatically.) Surveys for Outside Rides, Races, and Zwift Surveys aren't just for indoor workouts, you'll be asked how every ride felt, including unstructured outside rides and races. Those responses are a really important part of analyzing your fitness, especially if outside riding makes up a big share of your volume. - Outside workouts: If your ride was matched to a structured TrainerRoad workout, rate the structured portion of the ride, not the extra volume you added before or after it. And rate what you actually did: if you pushed above the targets until the effort felt hard, answer "Hard," even if the workout as originally prescribed would have felt easy. - Unstructured rides and races: just rate how the ride felt overall. An all-out race that felt brutally hard simply because racing is intense isn't a red flag about your fitness. If you get a follow-up question, "Intensity" is usually the right reason to pick. - Zwift: you'll answer the effort survey right in Zwift when you finish a TrainerRoad workout there. If TrainerRoad AI needs the struggle follow-up, you'll complete that part in the TrainerRoad app afterward. How to Add or Change an RPE Response If a survey wasn't completed right away, whether it was skipped, or the workout was completed offline or outside you can still add a response for up to 7 days after the activity. You can change an existing response in the same places: Web Step One: Open the ride from your Calendar or Activity List. Step Two: If a response is missing, you'll see a banner asking "How difficult was this workout?" Click this banner ride-analysis-missing-response.png Step Three: Pick your rating, and hit Save. If you already responded, click your rating in the "You rated this workout as:" banner. From there you can select a new rating and select Save. App Step One: Find the workout on the Calendar that you would like to add or change the RPE of. Tap the rating (or the missing-response prompt) in the workout details. Screenshot 2026-07-23 at 1.35.26 PM.png Step Two: Select or change the RPE survey and hit Save Screenshot 2026-07-23 at 1.40.13 PM.png If you receive a survey reminder email, you can also respond directly from the email by clicking the option that matches how the workout felt. Post-Workout Survey FAQs How should I respond to the survey if my effort varied over the course of the workout? Rate the ride as a whole. Even the hardest TrainerRoad workouts include rest intervals, and the end of an interval set will usually feel harder than the beginning of the set. This is all normal. The same workout might also feel different on different days depending on how you fueled or how stressful your day was. More important than what's typical or expected is how the ride actually felt to you. How do surveys help me get faster? Your responses give TrainerRoad AI context that ride data alone can't. If you're under or overshooting power targets, we look at the objective power data when analyzing your ride, but your survey tells us how that effort felt, which helps us tell the difference between a bad day, a hard-but-productive day, and a fitness change. That context feeds your upcoming workout recommendations and AI FTP Detection, and it helps keep your training appropriate for your abilities when fatigue starts to build. How important are surveys for my training? The more surveys you complete, the better TrainerRoad AI understands you as an individual, and the more personalized your recommendations become. Completing them consistently and honestly is important. You'll also build a subjective record of your training you can learn from later. Why do I occasionally see different questions on my surveys? Surveys adapt to how the workout went. If everything went to plan, you'll just get the rating question. If you lowered the intensity enough, skipped intervals, ended the workout early, or rated the effort as a maximum effort, you'll get a follow-up asking why. You may also see a follow-up when a ride was expected to be easy but you rated it hard. TrainerRoad AI just wants to know why a ride of that type was difficult. Either way, rate it how it felt. What do I do if my survey says I struggled with the workout, even though I wasn't really struggling? Select "I didn't struggle with this workout." Sometimes life happens, a phone call, a stretch break, a dropped sensor, and it can make a workout look harder than it really felt. The survey exists to clear that up. If you really did struggle, it's important to be honest about that, too. No judgment here, our only goal is to help you get faster. Will the system get confused if I take a break to stretch, fill bottles, or answer the phone? TrainerRoad AI makes allowances for short breaks between sets. If you pause during work intervals, it may read the workout as more of a challenge than you meant it to be and if it concludes you struggled when you didn't, you can override that on the survey by selecting "I didn't struggle with this workout." What if I don't have time to complete the survey? The surveys are designed to take no more than a few seconds, but if you miss one, don't worry, you can go back and complete it up to 7 days after the workout (see "How to Add or Change an RPE Response" above). What if I don't want to complete a survey? We highly recommend completing surveys so TrainerRoad AI can tailor your training. I tried to complete a missed survey but can't. What happened? You have up to 7 days after completing a workout to complete or edit its survey. We limit this window so your recollection of the effort is still fresh. That helps keep the data associated with your training trustworthy. If it's been less than 7 days and you still can't respond, shoot us an email at [email protected] and we'll investigate ASAP. When do I select "Other" as a reason? Select "Other" when you struggled or ended a workout early for a reason that isn't in the list. You can type a short note describing what happened, and it's saved with your workout. Why did I get a survey for an unstructured, outside ride? Every ride counts. Your RPE responses on unstructured outside rides are an important part of how TrainerRoad AI analyzes your fitness. Especially if outside rides make up a big share of your riding. If I complete an Outside Workout, where do I complete the survey? Sync the ride from your head unit. Then open the activity on the TrainerRoad website or in the app and add your response from the workout details (see "How to Add or Change an RPE Response" above). Should I get a Post-Workout Survey for my Ramp Test? No. This is because the Ramp Test is an all-out effort.

TrainerRoad AI • Last updated on Jul 23, 2026

Plan Builder Overview

Plan Builder is a tool that creates custom plans tailored to you and your goals. Plan Builder considers the unique demands of your goals, your available training time, and your recent training history to build a plan specific to you. Screen Shot 2024-09-16 at 1.02.29 PM.png With Plan Builder, training plans exist for just about every cycling discipline and can account for the specific needs of individual athletes. Build your custom plan and get training right away! Note: The most up to date Plan Builder is only available on the TrainerRoad website! We recommend building your custom plan on the TrainerRoad website to gain access to all of Plan Builders new functionality Plan Builder Walk-Through Plan Builder takes you through a series of steps to build you a fully tailored custom training plan. In Plan Builder, you add a start date, set goals and events for your schedule, choose how you would like to approach your training and customize your plan schedule. After Plan Builder builds your plan you’ll have the option to review it before adding your new plan to you Calendar. Customizing your plan is super easy, so let’s jump into it! Step 1: Sync Your Training History If you have any activity history, Plan Builder can use that data to help shape your plan. You can sync your activity history from Garmin Connect or Strava. If you don’t have any training history coming into TrainerRoad, don’t worry. Your plan will adjust as you progress through your workouts. How to Sync All of Your Garmin Connect Activities 1. Log into TrainerRoad to access your Account Profile. 2. Select “Activity Sync” from the menu on the left-hand side of the screen. 3. Click the option to “Connect with Garmin.” 4. Authorize TrainerRoad to access your Garmin Connect account by selecting “Agree & Connect.” 5. In Garmin Connect, authorize TrainerRoad to access your Garmin Connect account and data. If you would like a more detailed walkthrough, check out this article: Garmin Connect How to Sync All of Your Strava Activities 1. Log into TrainerRoad to access your Account Profile. 2. Select "Activity Sync" from the menu on the left-hand side of the screen. 3. Under Strava, click "Connect." 4. Read through how the TrainerRoad-Strava integration works and click "Agree & Connect." 5. Enter your Strava login credentials. 6. Authorize TR to connect with your Strava account. If you would like a more detailed walkthrough, check out this article: Strava Step 2: Choose your Goal and Start Date First you will need to let Plan Builder know if you are training to prepare for a specific event or if you would like a training plan to train for a general fitness goal. Screen Shot 2025-03-27 at 8.03.19 AM.png Once you have done this you will be prompted to choose the start date of your plan. You can start a plan at any time in the future, as long as plans do not have overlapping start/end dates with other plans. Screen Shot 2024-09-12 at 3.56.44 PM.png Step 3: Add Events or Goals Once you have chosen your start date you'll be adding your events or choosing your main goal and discipline! Select the options below for more information on adding events or choosing a goal and discipline. To Prepare for an Event This is where you will add your goal events! These can be cycling events and cycling stage races. Events can be added at these three different priority levels: - A Events are your most important events of the season. Your training plan is designed to have you at your best for these events. As such, you can only have a few A events in a year. These events have a full taper before the event with a recovery week after. A events should ideally be 12 weeks apart in order to be in peak form for both. - B Events can be seasonal objectives in their own right. They allow you to try different race prep and strategies to see what works best for you. B events receive a taper in the week of the event. - C Events are great practice and experience, but the outcome of these races should carry little value. C events will not change your plan. You can treat them like a hard workout. Screen Shot 2024-09-12 at 4.25.21 PM.png If you are unsure what races you are doing or what your final schedule is this upcoming season, no worries. You can always add events to your Calendar after your plan has been built and your plan will automatically adapt around the new additions. With that said we recommend adding at least 1 “A” priority event to your plan, when you build your initial training plan. Unsure of how to prioritize your races? Check out this blog article for more information. General Fitness Goals If you've chosen General Fitness Goals first you will be prompted to choose the length of your plan. You can choose between a 1 month, 2 month, and 3 month plan or opt for another duration! Screen Shot 2024-09-16 at 12.40.43 PM.png Once you have done this you will prompted to choose your plan's main focus by selecting your primary training discipline and your training plans primary goal: Screen Shot 2024-09-12 at 4.01.12 PM.png Step 4: Training Approach In the next step you can decide how aggressive you want your training to be by choosing your Training Approach. When choosing your training approach there are five options; conservative, moderate, balanced, demanding, and aggressive: - Conservative - A conservative approach is for athletes looking for more modest gains while benefiting from a reduced training load. This is a great approach for athletes looking to maintain their fitness or who are returning from injury. - Moderate - A moderate approach is for athletes who want steady progress and constant improvements with a comfortable and manageable training load. This is a solid option for athletes who haven’t trained in a long time or are new to the sport. - Balanced - This approach is called balanced because, for most athletes, this is the best approach to progress fitness while receiving enough recovery to remain consistent and prevent long-term fatigue. - Demanding - This is an approach for athletes who are prepared for a demanding plan and who understand their recovery needs to make progress. - Aggressive - This is an approach for athletes who want to push the boundaries of their current limits. Athletes will need to have a solid understanding of their nutrition, hydration, rest, and recovery needs for this training approach. Screen Shot 2024-09-12 at 4.29.51 PM.png Be sure to read the descriptions of each option on the slider. When in doubt we recommend opting for a more balanced approach! Once you've generated your schedule you'll be able to view your training plan! Step 5: Schedule Screen Shot 2024-09-12 at 4.39.48 PM.png Here in the schedule step, Plan Builder will automatically recommend a training schedule based on your training approach and imported training data. You will see an outline of what a general training week will look like. You can customize your schedule in the training week outline in these five ways: Dragging and dropping workouts: You can drag and drop workouts in the weekly schedule to the days of the week that you would prefer to complete them! workout move test.png Note: If you drag two workouts so they are close together you may receive a warning. Be sure to give yourself enough recovery between workouts! Changing the duration: You can change the duration of your planned workouts using the time drop down for each workout. Screen Shot 2024-09-12 at 4.44.24 PM.png Changing the workout type: You can change your indoor structured workouts to TrainerRoad Outside Workouts, Group Rides or Solo Rides, and Zwift Race from the drop-down menu. Screenshot 2025-06-09 at 10.32.31 AM.png Screenshot 2025-06-09 at 10.33.11 AM.png Adjusting amount of workouts per week: To adjust the amount of workouts per week or the number of intense workouts per week go ahead and click on the settings icon located in the top right hand corner of the weekly schedule. Screen Shot 2024-09-12 at 4.40.21 PM.png From here you can adjust how many days per week you want to train and how many intense workouts you want per week. Screen Shot 2024-09-12 at 5.12.32 PM.png Keep in mind, if you choose to do more days of training you may receive a warning that your plan has too much training load. You can restore the plan to the original settings to get you back on track by selecting Restore Schedule. Screen Shot 2024-09-12 at 5.01.59 PM.png If you'd like to tinker you can also reduce the duration of workouts, or change how many intense days you have per week to get your desired training schedule. Restoring your Original Schedule If at any point you'd like to restore your plan back to the initial recommendation go ahead and select the Restore option located to the right of the settings button and then hit Restore Schedule: Screen Shot 2024-09-12 at 4.55.29 PM.png Screen Shot 2024-09-12 at 4.58.40 PM.png Step 6: Name your plan and Review! Finally you can go ahead and give your training plan a name, and take the plan to review! Screen Shot 2024-09-12 at 5.04.53 PM.png You will see a breakdown of your custom training plan with details of your schedule and an overview of your plan phases and when they start, before you add the plan to your Calendar Screen Shot 2024-09-12 at 5.06.36 PM.png Your plan will be composed of these three different phases: - Base Training Phase is where it all begins. It's the foundation of cycling and triathlon success, developing resilient aerobic fitness and laying the groundwork for higher-intensity, discipline-specific training later on. The importance of base training can't be overstated. - Build Training Phase builds discipline-specific fitness on your aerobic foundation, pushing you out of your comfort zone to increase your sustainable workload and make you faster. - Specialty Training Phase Focuses your training on the specific demands of your goals and/or events. This is a demanding discipline-specific final block of training. FAQ What if I already have events on my calendar? Plan Builder will detect events already on your calendar, and ask you to "Include" them once you reach the “Events” step of the process. What if I need to add events later? No problem! When new events are added after a custom plan has been added to the calendar, we’ll ask you if you would like those events to be accounted for in your plan and edit the plan to better fit that event. What if I need to take time off? You can add time at any point in your TrainerRoad Calendar once your plan is built. Learn how here: How to Add Time Off to My TrainerRoad Calendar What if I’ve already started training? Go ahead and choose a start date when you actually started training, even though it's in the past. This will make the plan automatically start where you were in your training! Why does my plan go Base/Build/Base? In your plan, when you have extra time before your goal event, alternating between Base and Build phases ensures your body stays responsive and well-prepared for your target event. Utilizing the Base phase after building fitness allows you to reduce fatigue, prevent plateaus, and enter your Specialty phase with the energy needed to maximize your event-specific gains. TrainerRoad Base training is not the same as Traditional Base training. So when TrainerRoad Base training is used after a Build phase, it does not revert the plan to significantly easier Z1/Z2 training. Instead, it strategically shifts your training to maintain progression while giving your body the necessary preparation for the final push into the Specialty phase. Note: If your plan is long enough, alternating between Base and Build serves the same preparatory function mentioned above. I got a different volume than what I’ve been doing, why is that? Your recommendation is customized for you based on your current capabilities as an athlete, your goal, and your Training Approach. If you are seeing a different volume than what you have been doing you might’ve been doing too much volume before, or not enough. Why did my long Endurance ride change to a Solo Ride? We recommend doing particularly long Sunday Endurance rides outside. You’ll notice that your training plan’s Solo Ride still has wattage/RPE targets and instructions on how to ride so that you can maintain the same goals as your scheduled workout. How do you know which training plan and schedule is best for me? We do a deep analysis of all of your data to intelligently recommend how much volume, intensity, and recovery you need. Where are Masters plans? Masters plans are training plans with one less day of intensity per week. You can adjust how many intense days per week your training schedule has. To do this open the Settings panel to change between 2- and 3-days of intensity per week. Masters should use 2-intense workout plans. Can I adjust the total amount of workouts per week? You can adjust how many workouts per week your training schedule has. To do this open the Settings panel to change between 2-6 workouts per week. We highly suggest using our customized training schedule recommendation, though. How can I make a plan for maintaining fitness? When you start building a plan, you will be asked if you want to build a plan for an event or fitness goals. If you would like to build a plan to maintain fitness, select fitness goals, then select your discipline and choose “Maintaining Fitness” as your goal. This will build a plan focused on maintaining your specific level of fitness. Can I make workouts too long or too short? If you edit your plan in a way that would be detrimental to your fitness goals, or ability to complete the plan, you’ll see a Warning banner on the page. This means your plan schedule is not recommended. Changing workout durations to be shorter than the initial recommendation, isn’t necessarily a bad thing, but you may be able to handle more than you think! I'm not trying to win races, but I do want to get into better shape. Is there a plan for that? Yes! Plan Builder can build plans structured around your primary discipline and goals. How does the PBv2 work for athletes who don’t have a target event? Plan Builder can build plans structured around your primary discipline and goals. How do I balance my strength training and other activities with my TrainerRoad Plan? Does Plan Builder consider strength training or cross-training? If you don’t have Activity Sync set up with TrainerRoad, we recommend getting that set up so that all of your training, strength training included, is imported to TrainerRoad. If you do anything that would lead to long-term burnout, TrainerRoad AI will adjust your TrainerRoad workouts down or prescribe a Rest Day. Will my current training plan change with the update? You’ll see the option to optimize your current custom plan if you have one added to your Calendar. You can always update your Training Approach and Training Schedule by clicking on the plan name or plan annotation from your Calendar. How can I update my plan if my goals or schedule change? You’ll see the option to optimize your current custom plan if you have one. You can always update your Training Approach and Training Schedule by clicking on the plan name or plan annotation from your Calendar. Where can I use the new Plan Builder? You can use the new Plan Builder on the TrainerRoad website! Can I use Plan Builder if I have limited time to train? Yes! You can even make plans with only 2 workouts per week. You can adjust the duration of any workout to be shorter if you want. Will Plan Builder re-build the plan if I add new events after the plan has started? Yes! Plan Builder will adjust around any event added to your Calendar. Can I still choose specific training phases (Base, Build, Specialty) manually? Yes! You can still add individual training phases to your Calendar. To add individual Training phases to your Calendar select Training Phases at the Training Plans page. I'm training for an event but I don't know the exact dates yet. What should I do? If you aren’t sure what the exact dates of your priority events are you have a couple of options! Add the event to your plan with an approximate date of when it may be. Once you know the date, update the event date on your Calendar and we’ll ask to update your plan to peak your fitness for your event. Build a plan without an event, selecting the event’s discipline and your personal goal. Once you know the date, add the event to your Calendar and we’ll update your plan to peak your fitness for your event. Are Triathlon plans supported? You can build a training plan with Plan Builder! There are some differences in the steps when you build a triathlon plan with Plan Builder instead of a cycling plan. Can I make a Polarized plan with the new Plan Builder? Currently you cannot build a Polarized Plan Builder plan. The good news is that this is something we are hoping to implement in the future.

Plan Builder • Last updated on Jul 21, 2026