Skip to content
Home TrainerRoad Basics Pairing Your Devices

Pairing Your Devices

9 articles

How to Use Broadcast Mode to Sync Heart Rate Data from Garmin Watches to TrainerRoad

TrainerRoad Athletes can sync their heart rate (HR) data from Garmin watches to the TrainerRoad app. In this guide, we will walk you through the steps to set up and use Broadcast mode on your Garmin watch, allowing you to seamlessly track your heart rate during TrainerRoad workouts. To get started, you will need the following: A compatible Garmin watch: Ensure your Garmin watch supports Broadcast mode. Refer to Garmin's documentation or product specifications to confirm compatibility, here. TrainerRoad app: Download and install the latest version of the TrainerRoad app on your smartphone, tablet, or computer. Sign in to your TrainerRoad account or Sign-up if you haven't already. Bluetooth and ANT+ connectivity: Make sure your Garmin watch and your device running TrainerRoad have Bluetooth and/or ANT+ capabilities to establish a wireless connection. NOTE: Even though many of these watches have basic Bluetooth capabilities, Broadcast mode is ONLY via ANT+ for most of the Garmin watches. For most of the Garmin watches, users cannot connect their HR data to TrainerRoad via Bluetooth. Garmin recently released a firmware update for the Garmin Forerunner 245 and 945 that now allows the watch to broadcast HR data to TrainerRoad via Bluetooth. Enabling Broadcast Mode on Your Garmin Watch 1. On your Garmin watch, navigate to the settings menu. 2. Select Settings > Sensors > Heart Rate. 3. Find the "Broadcasting" or "Broadcast Mode" option and select it. 4. Enable the Broadcast mode on your watch. You will now be able to transmit heart rate data wirelessly to other compatible devices (TrainerRoad). Pairing Your Garmin Watch with TrainerRoad 1. Launch the TrainerRoad app on your device. 2. Ensure that Bluetooth or ANT+ connectivity is turned on, on your device. 3. Navigate to the Devices page in the TrainerRoad app. 4. Look for your Garmin watch (HR) in the list of available devices and select it. 5. The box around your Garmin watch on the Devices page should be green to show it has been paired successfully. Starting Your TrainerRoad Workout 1. Choose a workout from your TR Calendar or TR Workouts page. 2. Begin the workout by tapping the "Load Workout" button. 3. Your Garmin watch will now transmit heart rate data to the TrainerRoad app. 4. The TrainerRoad app will display your heart rate data in real-time, allowing you to monitor your effort level and optimize your training. Helpful Tips: - Make sure your Garmin watch and the device running TrainerRoad are in close proximity during the pairing process for a reliable connection. - Ensure that your Garmin watch is charged sufficiently before starting a workout to avoid any interruptions. - If you encounter connection issues, try restarting your Garmin watch and the device running TrainerRoad. You can also try turning off other nearby Bluetooth or ANT+ devices that might interfere with the signal.

How to Pair Your Devices

Here are the steps to make sure you can pair your devices to TrainerRoad: 1. Open the TrainerRoad app 2. Navigate to the "Devices" tab 3. Pedal for a few moments to wake up your devices. 4. Make sure that either Bluetooth or ANT+ is "On" 5. Once your device is visible and ready to pair, it will appear in the device list. 6. Click on the device and wait until it is highlighted green. (A green line will blink above the device tile while pairing and will become a solid green border once the device is paired.) Screen_Shot_2021-10-14_at_10.56.07_AM.png Screen_Shot_2021-10-14_at_10.56.20_AM.png Jump to the following sections below for quick tips on pairing your specific setup: - Smart Trainer - Smart Trainer + Power Meter (PowerMatch) - Mechanical Trainer + Speed Sensor (VirtualPower) - Mechanical Trainer + Power Meter How to Pair Devices on Desktop (Mac and Windows) pair_KICKRelectron.gif How to Pair Devices on Mobile (iOS and Android) pair_KICKR.gif Pairing a Smart Trainer - Ensure the trainer is plugged in and "awake" - Select the corresponding device tile on the "Devices" screen - Once your trainer is paired, a "Best Practices" screen will appear. Take note of the information shown on this screen (calibration details, firmware information, and general best practices with ERG mode). - After initially pairing your trainer, the device will automatically pair to TrainerRoad without displaying the "Best Practices" screen (but it can still be accessed in the future by selecting the trainer tile — see below for more information on accessing Device Details). - The default setting for a smart trainer is ERG mode (electronic resistance control) where TrainerRoad controls the resistance of your trainer to make sure you're hitting the power targets. - Make sure to use the TrainerRoad recommended gearing (smallest cog in the front chainring and a middle cog in the cassette) - Focus on maintaining as consistent of a cadence as possible to ensure you have the best experience. Note: if you have Bluetooth and ANT+ enabled and see two tiles corresponding to your trainer, pair to the Bluetooth version only. Pairing a Smart Trainer + Power Meter (PowerMatch) - Ensure the trainer is plugged in and "awake" - Make sure the power meter has batteries installed, and the device is awake - Select the corresponding device tiles on the "Devices" screen - Once your trainer is paired, a "Best Practices" screen will appear. Take note of the information shown on this screen (calibration details, firmware information, and general best practices with ERG mode). - Similarly, once the power meter is paired, a "Best Practices" screen will appear. Take note of the information shown on this screen (calibration details, firmware information, and tips on pedaling technique). - After initially pairing your trainer, the devices will automatically pair to TrainerRoad without displaying the "Best Practices" screens (but they can still be accessed in the future by selecting the corresponding tile — see below for more information on accessing Device Details). - The default setting for a smart trainer is ERG mode (electronic resistance control) where TrainerRoad controls the resistance of your trainer to make sure you're hitting the power targets. - There is an additional default setting when training with a smart trainer and power meter "PowerMatch." PowerMatch uses the readings from the power meter to control the resistance of your smart trainer to account for any power difference between the trainer and the power meter. Note: if you have Bluetooth and ANT+ enabled and see two tiles corresponding to your trainer, pair to the Bluetooth version only. Pairing a Non-Smart Trainer + Speed Sensor (VirtualPower) - With non-smart trainers and a speed sensor, you'll need to use a feature known as VirtualPower. VirtualPower is a power calculation that’s based on your speed readings and the unique make and model of the trainer you’re using. - To pair your speed sensor, confirm the device has batteries installed and that it's properly placed on your bike. - Wake the sensor by spinning the cranks, and select the corresponding device tile in the "Devices" screen. - If your speed sensor uses a magnet to trigger a rotation, verify the magnet is positioned to pass by the sensor arm properly. Pairing a Non-Smart Trainer + Power Meter - Make sure the power meter has batteries installed - Wake the device by spinning the cranks. - Select the corresponding device tiles in the "Devices" screen. Adjusting Device Settings From the Device Settings, you can adjust your devices' names, access mode settings, and perform calibrations. Note: Smart trainers are set to ERG Mode by default. If you have a power meter and a smart trainer, PowerMatch is enabled by default. settings_KICKRelectron.gif settings_KICKR.gif

Bluetooth Smart Connectivity

Bluetooth Smart (4.0) is a wireless communication protocol that devices such as heart rate straps or speed/cadence sensors use to communicate with TrainerRoad. The devices you connect to TrainerRoad must be either Bluetooth Smart or ANT+. * When running TrainerRoad on our Air application Bluetooth Smart is only able to pair to one power meter at a time, including smart trainers. If you would like to pair a smart trainer and a power meter, you must use ANT+. Using Bluetooth Smart with the TrainerRoad iOS App TrainerRoad is compatible with any iPhone or iPad that has Bluetooth 4.0 built in. iPhones with BT 4.0: 4s, 5, 5s, 5c, 6, 6s, 6 Plus, 6s Plus, 7, 7 Plus, 8, and X iPads with BT 4.0: Air, Air 2, Mini, Mini (Retina) Most Bluetooth Smart heart rate straps, speed/cadence sensors, and power meters are supported by TrainerRoad. Here are some of the most popular Bluetooth Smart devices we support: - Wahoo Heart Rate Monitors - Wahoo Blue SC Speed Cadence Sensor - Kinetic inRide - Wahoo Kickr - Stages Power Meter Don't have the TrainerRoad iOS app? Download it today from the Apple App Store to start training. Using Bluetooth Smart with the TrainerRoad Android App TrainerRoad works with phones and tablets running Android 5 Lollipop and higher. Most Bluetooth Smart heart rate straps, speed/cadence sensors, and power meters are supported by TrainerRoad. Here are some of the most popular Bluetooth Smart devices we support: - Wahoo Heart Rate Monitors - Wahoo Blue SC Speed Cadence Sensor - Kinetic inRide - Wahoo Kickr - Stages Power Meter Don't have the TrainerRoad Android app? Download it today from the Google Play Store to start training. Using Bluetooth Smart with TrainerRoad Desktop Most Bluetooth Smart heart rate straps, speed/cadence sensors, and power meters are supported by TrainerRoad. Here are some of the most popular Bluetooth Smart devices we support: - Wahoo Heart Rate Monitors - Wahoo Blue SC Speed Cadence Sensor - Kinetic inRide - Wahoo Kickr - Stages Power Meter Other Bluetooth Smart heart rate monitors should also work with TrainerRoad. Any other Bluetooth Smart heart rate, speed/cadence, or power meter supported by the Wahoo SDK. Supported Operating Systems and Required Hardware Bluetooth Smart devices require a computer that has Bluetooth 4.0. Mac OSX 10.8 or Higher Bluetooth 4.0 is native in the newer MacBook Air (mid-2011), Mac Mini (late 2011), MacBook Pro (mid-2012), and iMac (early-2013). Mac OSX 10.7 or Older - No Native BT 4.0. The IOGEAR or ORICO dongles can work for Macs that don't come with native BT 4.0. Unfortunately, those dongles don't seem to work consistently with older Macs — especially if the user is running Mavericks. This is not a recommended approach, but if you have the dongles you can give it a try. Windows 10 Bluetooth 4.0 is native for many Windows 10 machines. To confirm your computer has the hardware to support native Bluetooth 4.0 , follow the instructions from this article. Windows 7, 8, and 8.1 Bluetooth Smart on TrainerRoad on Pre-Windows 10 requires a special BLED112 USB dongle which is available from Mouser and Digi-Key. They both ship worldwide. Even if your computer has native Bluetooth 4.0 or you have another Bluetooth 4.0 USB dongle, you'll still need the BLED112. The good news is that it is about half the price of an ANT+ USB dongle. We use the Bluegiga BLED112 dongle to offer Bluetooth Smart on all versions of Windows. Windows 8 has some decent support for Bluetooth Smart but if we would have implemented our solution using Windows drivers for Bluetooth dongles, this would have only worked on Windows 8. Steps: 1. Get the Bluegiga BLED112 dongle from Mouser or Digi-Key. 2. Install the drivers and latest TrainerRoad.exe from here. Frequently Asked Questions Why does Android require location services to be enabled to allow the TrainerRoad app access to Bluetooth? Android has declared that in order for an application to use Bluetooth, the application must define access permissions for location services as well. This is due to the nature of Bluetooth architecture on Android devices after recent updates. Since TrainerRoad needs Bluetooth enabled in order to connect to athletes' devices (trainer, power meter, etc,) the app must define access permissions for location services. This does not mean that TrainerRoad is using location services. For troubleshooting steps please see below. Troubleshooting Need more help? Check out the Bluetooth Smart Troubleshooting article.

ANT+ Connectivity

ANT+ is a communication protocol that allows wireless devices to transmit information from one another. Simply put, it's the "language" that ANT+ devices use to communicate with each other. Many of your favorite cycling and fitness devices use this protocol and TrainerRoad supports these devices with an ANT+ key or dongle. Check to see if your cycling device supports ANT+ with the official device directory. Using ANT+ with iOS To connect your ANT+ devices with the TrainerRoad iOS app you will need a Wahoo-made ANT+ key and an Apple-made 30-Pin to Lightning adapter (depending on your iOS device). iOS Devices with Lightning (iPhone 5, 5c, 6 & 6 Plus, 7 & 7 Plus, 8 & 8 Plus, X and iPad Mini, Air & Air 2) Requires Wahoo ANT+ key and a Lightning to Apple 30-Pin adapter 2014-11-17_09-20-24.png iOS Devices with 30-Pin (iPhone 4 & 4s and iPad 2nd Generation) Requires Wahoo ANT+ key or Wahoo ANT+ Bike Case 2014-11-17_09-18-14.png Wahoo ANT+ Key This small adapter is used to connect your ANT+ devices to your compatible iOS device through the 30-pin connector. The older white models of the Wahoo ANT+ Keys are not supported. The Wahoo ANT+ Key is no longer manufactured by Wahoo and supply is subject to change. Note: Garmin ANT+ keys are supported. To our knowledge, this is the most affordable option for the Wahoo ANT+ Key. If you can't get TrainerRoad or Garmin ANT Agent/Express to detect the USB stick, you likely have a bad ANT stick and should return/exchange it from your place of purchase. Wahoo_Bike_Case.jpg Wahoo ANT+ Bike Case Allows you to mount your 30-pin iPhone 4S/4 on your bike's handlebars or stem. This will not work with iPhone 5 or newer. The Wahoo ANT+ Bike Case is no longer manufactured by Wahoo and supply is subject to change. 2014-11-17_09-20-24.png Apple Short Lightning Adapter Short format Lightning to 30-pin adapter supports analog audio output, USB audio, as well as syncing and charging. This adapter is no longer manufactured by Apple and supply is subject to change. Note: Lightning Adapters not made by Apple are not supported. Non-Apple adapters don't support data transfer. Apple Long Lightning Adapter This longer adapter lets you connect 30-pin devices that need more room to plug in. This adapter is no longer manufactured by Apple and supply is subject to change. Note: Lightning Adapters made by a third-party manufacturer are not supported. Non-Apple adapters don't support data transfer. Using ANT+ with Android Does My Android Device Work with ANT+? To find out more about your specific device's ANT+ compatibility, and more about the ANT+ communication protocol, check out ANT+'s page, ANT+ In Phones and Tablets. Note: This is not a complete list of Android devices that support ANT+. If your device is NOT listed, it doesn't mean it does not support ANT+. If you have further questions as to whether your device will work with ANT+, please contact our Support Team. Some Android devices are ANT+ compatible on their own, but you may need to install something called "ANT plugins" before you're ready to ride. Given the various ways phone manufacturers implement ANT+, some devices may have stronger ANT+ signals than others. If you’re having difficulty using a native ANT+ device, you may need an adapter to train normally. ANT Plugins Required for Devices with Built-In ANT+: - ANT+ Plugin Service - ANT+ Radio Service Athletes can install these plugins by tapping the ANT+ icon and by selecting Learn More. Android_devices_ANT1.png Android_ANT1.png Other devices may require an ANT+ dongle. Fortunately, some of these devices work with existing ANT+ USB dongles from your computer and an additional USB-C or phone-specific USB adapter. ANT Plugins Required for Devices without Built-In ANT+ (Requires ANT+USB Stick): - ANT+ Plugin Service - ANT+ Radio Service - ANT+ USB Service Athletes can install these plugins by tapping the ANT+ icon and by selecting Learn More. Android_devices_ANT1.png Android_ANT1.png If your Android device does not have built-in ANT+: You will need an adapter (USBC-to-USB OR Micro USB-to-USB) that will allow you to plug your ANT+ USB dongle into your Android phone or tablet. TrainerRoad Recommends: USBC-to-USB Adapter Micro USB-to-USB Adapter Make sure you check to see if your Android device uses a USB-C or Micro USB port before purchasing one of the above adapters. In addition to the USB adapter, you will need the actual ANT+ USB stick that will turn your Android device into an ANT+-receivable unit. TrainerRoad Recommends: Garmin ANT+ USB.png Mini Garmin ANT+ Stick A great ANT+ USB stick option — and it's small enough to stay plugged in when you aren't training. Cycplus ANT+ USB A good, more affordable version for an ANT+ dongle Live in Australia? Aussie users will need to pick up an ANT+ stick from an Australian vendor or a local bike shop instead of the Amazon links above. Using ANT+ with Desktop To connect your ANT+ devices with the TrainerRoad Desktop app you will need an ANT+ dongle. USB1 and USB2 There are two kinds of ANT+ USB dongles to choose from: USB 1.0 and USB 2.0. USB 1.0 can connect up to 4 devices at a time, while USB 2.0 can handle up to 8. Most newer dongles will be 2.0 since 1.0 is no longer in production. USB 1.0 dongles will only work with the Legacy (Adobe AIR) application. If you are using a Wahoo KICKR with the Legacy app, you will still need a USB 2.0 dongle. If you are unsure which you have, check the info on the back of the stick. Please note, you will need a USB 2.0 dongle in order to use any ANT+ device on the new Windows, Android, or Mac applications. Check out this article for more information on the difference between USB1 and USB2 sticks. Problems Connecting Your Devices? Visit our troubleshooting article for help getting your devices connected so you can start training!

Compatible Devices and Sensors

TrainerRoad supports most Bluetooth Smart and ANT+ sensors, including trainers, heart rate monitors, power meters, and speed/cadence sensors. This page will help explain which devices should work with TrainerRoad, along with how you can check yourself if your training device isn't listed here. Keep in mind that this list is not exhaustive. If your trainer or device is not listed here, that does not mean you are out of luck! Check out the "How do ANT+ and Bluetooth standards work" at the bottom of this article, and reach out to our support team if you have any compatibility questions. If not otherwise marked, devices below are compatible over both Bluetooth and ANT+. Protip: open up the dropdown menus below, then press Ctrl + F (cmd + F on Mac) on your keyboard to quickly search for your device's name. Speed & Cadence Sensors BBB - - Bluecombo+ - Smartcadence - Digicadence (ANT only) - Digispeed (ANT only) Bontrager - - Interchange Digital Combo Sensor - DuoTrap S - DuoTrap (Pre-2015 version is ANT only) - SpeedTrap Digital Speed Sensor - Digital Speed Sensor (ANT only) - Digital Cadence Sensor (ANT only) Cateye - - TR200DW/TR300TW (Bluetooth only) CycleOps - - PowerTap SL 2.4 Speed/Cadence Sensor (ANT only) - PowerTap SL 2.4 Speed Sensor (ANT only) Garmin - - GSC 10 (ANT only) - Bike Speed Sensor (ANT only) - Bike Cadence Sensor (ANT only) - Bike Speed Sensor 2 - Bike Cadence Sensor 2 Giant - - Ridesense 2.0 - Ridesense (ANT only) iMaze - - Speed/Cadence (Bluetooth only) Lezyne - - Cadence Speed Flow Sensor (Bluetooth only) Pioneer - - SGY-CS500 (ANT only) Polar - - Speed and Cadence Sensor (Bluetooth only) PowerTap - - Speed or Cadence sensor (Only transmits speed or cadence, not both) Scosche - - RHYTHM SC (Bluetooth only) Saris/PowerTap - - Magnetless Speed Sensor Cadence Sensor Sigma - - R2 Duo Speed and Cadence Sensor - Speed Transmitter (ANT only) - Cadence Transmitter (ANT only) SRM - - Speed Pod (ANT only) Tacx - - Speed and Cadence Sensor Smart Topeak - - PanoBike Cadence and Speed Sensor (Bluetooth only) Wahoo - - Blue SC (Older Wahoo Blue SCs are Bluetooth only. The newest Blue SC models will work over ANT+ and BLE) - RPM Speed - RPM Cadence Heart Rate Monitors 4iiii - - Viiiiva Bontrager - - Softstrap HR Belt Cateye - - HR-11 (ANT only) - HR-12 (Bluetooth only) Elite - - HR Transmission Belt (ANT+) - HR Transmission Belt (BLE) Garmin - - Soft Strap Premium HRM (ANT only) - HRM-Dual - HRM-Tri (ANT only) - HRM-Swim (ANT only) - HRM-Run (ANT only) - Fenix 6 - Fenix 5 (ANT only) - Fenix Chronos (ANT only) - Fenix 3 HR (ANT only) - Forerunner 935 (ANT only) - Forerunner 735XT (ANT only) - Forerunner 235 (ANT only) - Forerunner 35 (ANT only) - Forerunner 25 (ANT only) - Vívosmart HR+ (ANT only) - Vívoactive HR (ANT only) - Vivoactive 4 (ANT only) Giant - - 2 in 1 Heart Rate Belt Lezyne - - Heart Rate Flow Sensor (Bluetooth only) Mio - - LINK - Slice - ALPHA 2 (Bluetooth only) - FUSE - MioPod Pioneer - - SGY-HR500 (ANT only) Polar - - A370 Watch (Bluetooth Only) - H10 HR Sensor - H7 HR Sensor (Bluetooth only) - H6 HR Sensor (Bluetooth only) ProForm - - SmartBeat (Bluetooth only) Scosche - - Rhythm Chest Strap (Bluetooth only) Sigma - - R1 Duo Heart Rate Transmitter Specialized - - SpeedZone Digital HR Strap (ANT only) Suunto - - Smart Sensor (Bluetooth only) Tacx - - Heart Rate Belt Smart Topeak - - PanoBike Heart Rate Monitor (Bluetooth only) Wahoo - - Wahoo TICKR X/ TICKR 2020 - Wahoo TICKR Run - Wahoo TICKR FIT - Wahoo TICKR Whoop - - 3.0 (Bluetooth only) Zephyr - - HxM - There is a version of the HR monitor known as “Zephyr HxM BT.” That version will not work with TrainerRoad, as it uses a proprietary version of Bluetooth. However, the Zephyr HxM Smart should pair. Power Meters 4iiii - - Precision - Precision Pro - Precision Podiiiium Pro - Precision Fiiiit Easton/Raceface - - Cinch Power Meter Favero - - Assioma (For Dual-Power, ANT required, but will pair over Bluetooth) - bePro (ANT only) Full Speed Ahead (FSA) - - PowerBox (Bluetooth is available in newly bought FSA PowerBox power meters, or as a purchasable upgrade.) Garmin - - Vector (ANT only) - Vector S (ANT only) - Vector 2 (ANT only) - Vector 2s (ANT only) - Vector 3 - Vector 3s Team LIMITS - - LIMITS Power Meter Look - - Keo Power Dual Regular - Keo Power Dual Essential Pioneer - - SBT-PM - SBT-LT - SGY-PM (ANT only) - SGY-LT (ANT only) Polar - - Keo Power Meter Regular (Bluetooth only) - Keo Power Meter Essential (Bluetooth only) Power2Max - - Classic (ANT only) - Type S (ANT only) - NG - NG Eco PowerTap - - P1 Pedals (ANT+ must be used for dual power) - P2 Pedals (ANT+ must be used for dual power) - C1 Chainrings - G3 Hub (Newer G3’s ship with a dual-band hub cap, but older G3 units that have an ANT+ cap on it it can be replaced with a dual-band or BLE cap.) - GS Hub (see above - the same information applies) - Pro Hub (ANT only) - SL+ Hub (ANT only) - SLC+ Hub (ANT only) Quarq - - Cinqo (ANT only) - DZero / DFour (Older versions of the power meter (~2016), or specialized versions of the power meter may not support Bluetooth) - Elsa (ANT only) - Riken (ANT only) Rotor - - Power Crank (ANT only) - Rotor Power LT (ANT only) - Rotor INspider (ANT only) - Rotor 2INpower Road - Rotor INpower Road Shimano - - FC-R9100-P (the R9100P only broadcasts power on ANT+, and not Bluetooth Smart) SRM - - EXACT Pedals - X Power Pedals Stages - - Crank Arm Power Meter (ANT+ must be used for dual power) Watteam - - Powerbeat Road Verve - - Infocrank M30 Team Zwatt - - Zpider - Zwatt Zimanox Trainers 4iiii - - Fliiiight Bkool - - Classic (ANT+ and Desktop apps only) - Pro - Pro 2 (No resistance control over Bluetooth - pairs as a power meter) - Smart Go (No resistance control over Bluetooth) - Smart Air (Desktop apps only) Computrainer - - Note: The CompuTrainer will only work on TrainerRoad's Legacy app due to its age and lack of support from RacerMate. Check out our page on the CompuTrainer here for more information on how to get it working with TrainerRoad. CycleOps/Saris - - Hammer - H2 - H3 - Magnus - M2 - PRO Indoor Cycle 300/400 (Must use TrainerRoad legacy. Reach out to support for more information) Elite - - Arion Digital Smart B+ Rollers (No resistance control over Bluetooth - pairs as a power meter) - Direto - Direto X - Direto XR - Drivo (No resistance control over Bluetooth - pairs as a power meter) - Drivo II (Must use Misuro B+ to get power readings. No resistance control) - Fuoripista - Kura (No resistance control) - Nero - Novo Force (Must use Misuro B+ to get power readings. No resistance control) - Novo Smart - Qubo Digital Smart B+ - Suito - Tuo - Turno (No Resistance control) - Rampa - Real E-Motion B+ (Resistance control is only available through ANT) - Not to be confused with the earlier 'Quick Motion', ‘E-Motion’, or 'Real E-Motion'. Those trainers are only usable through VirtualPower. - Real Turbo Muin B+ - Not to be confused with the earlier ‘Turbo Muin', ‘Turbo Muin Smart B+’, or ‘Real Turbo Muin’. Those trainers are only usable through VirtualPower. - RealAxiom B+ - Not to be confused with the earlier ‘Real Axiom’, which connected via USB. The older Axiom can only be used with a power meter or VirtualPower. - Real Tour B+ - Not to be confused with the earlier ‘Real Tour’, which connected via USB. The older Real Tour can only be used with a power meter or Virtual Power. InsideRide - - E-Motion Smart Rollers JetBlack - - WhisperDrive Smart Kurt Kinetic - - Control T-6300 - InRide1 - The InRide1 is only supported on the TrainerRoad Legacy application. Contact Support and we can get you on the Legacy app. - InRide2 (No resistance control) - InRide3 (No resistance control) - Road Machine Control (Bluetooth only) - Smart Control (Bluetooth only) - R1 (Bluetooth only) Magene - - Gravat2 (Does not support ERG mode over Bluetooth, only ANT+) Minoura - - Smart Turbo Kagura - Direct Drive (Does not support ERG mode over Bluetooth, only ANT+) - Smart Turbo Kagura - Wheel On (Does not support ERG mode over Bluetooth, only ANT+) Stages - - StagesBike Tacx - - Bushido Smart - Flow Smart - Flux - Flux 2 - Flux S - Genius Smart (Model numbers T2060 and T2080 only - other versions will not pair with TrainerRoad) - IRONMAN Smart - Neo - Neo 2 - Satori Smart (Only provides power on Bluetooth, no resistance control) - Vortex Smart / TDF (Model numbers T2180 and T2380 only - other versions will not pair with TrainerRoad) Wahoo - - KICKR Snap - KICKR BIKE - KICKR Wattbike - - Atom (ERG mode only - no slope or resistance mode) - Pro/Trainer (Requires the Model B Monitor to connect over Bluetooth) Zycle - - Smart Z Bike - Smart Z Go - Smart Z Pro For more information on compatible trainers, see the Help Center page here. How do ANT+ and Bluetooth Standards work? While browsing training devices online, you’ve likely seen things like “Bluetooth Smart” or “ANT+ FE-C” mentioned and wondered what these mean. In the early days of technology-based training, each device or company used its own sort of “language" to communicate between the device and the training software. For example, Trainer A and Trainer B might both communicate using ANT+, but how all of their information was packaged to us would differ - meaning we would need to add support for both trainers individually. As indoor device options grew, this became quite a struggle. This issue led to the creation of Bluetooth and ANT standards which (you guessed it) standardized how data is sent and received. These two standards are Bluetooth Smart, and ANT+ Fitness Equipment-Control (FE-C). Instead of each company making their own ANT or Bluetooth protocol, companies can now choose to use Bluetooth Smart or ANT FE-C and know that their device will work on a multitude of platforms. HR monitors, Cadence sensors, and Power meters all have their own versions of a Bluetooth and ANT standard protocol. If you see that a trainer or other device is marked as "Bluetooth Smart" or "ANT+ FE-C", it should be compatible with TrainerRoad. If you are still unsure and would like to double-check your trainer or other devices' functionality, feel free to reach out to us at [email protected].

ANT+ Heart Rate Monitor

Most ANT+ Heart Rate Monitors are compatible with TrainerRoad. The following article walks you through best practices to pair your HRM. Before attempting to pair your device, make sure you've read through this article on ANT+ Connectivity to confirm you have everything you need for an ANT+ connection with TrainerRoad. If you need help pairing a Bluetooth heart-rate monitor, check out this article about Bluetooth heart-rate monitors. Pairing your ANT+ Heart-Rate Monitor (Desktop) 1. Plug-in your ANT+ USB Stick to your computer 2. Open the Devices tab in the TrainerRoad app 3. Make sure ANT+ is "On" in TrainerRoad's settings 4. Make sure your Heart Rate Monitor is on and is sending data. For most HRMs, this is as simple as putting the device on. 5. Once the HRM is on, you should see it show up in the "Devices" menu. Click on the heart rate monitor to begin pairing. 6. Your heart-rate monitor is paired! Screen_Shot_2021-03-23_at_10.50.12_AM.png Screen_Shot_2021-03-23_at_10.50.27_AM.png Pairing your ANT+ Heart-Rate Monitor (Mobile) 1. Make sure that ANT+ is "On" 2. If ANT+ does not show as "On", double-check your ANT+ dongle and check your built-in ANT+ receiver (if your phone supports this function) 3. Wear the HRM so it can start transmitting a signal 4. Tap the heart rate device to initiate pairing 5. Once the border turns green the device is successfully connected and you are ready to ride! ANT_HR_RN1.PNG ANT_HR_RN2.PNG Pairing your ANT+ Heart-Rate Monitor (Legacy) 1. Plug in your ANT+ USB Stick 2. Wear the HRM so it is awake and can transmit a signal 3. Select "Pair" located next to the heart-rate monitor 4. TrainerRoad will search for the heart-rate monitor 5. Wait for TrainerRoad to find the heart-rate monitor 6. Your HRM is paired once the Search box turns green and you see data Troubleshooting - Make sure you're wearing your HR monitor properly - Wet the sensors to ensure a proper connection - Replace HR strap's batteries if need be If you are having problems with your ANT signal, Check out our ANT+ USB Troubleshooting Article.

Bluetooth Heart Rate Monitor

TrainerRoad is compatible with most Bluetooth Heart Rate Monitors. Before attempting to pair, make sure you've read our article on Bluetooth Smart Connectivity to confirm you have everything needed to use Bluetooth. If you are having trouble connecting an ANT+ heart-rate monitor check out this link on ANT+ Heart-Rate Monitors. Pairing a Bluetooth Smart Heart-Rate Monitor (Desktop) 1. Make sure Bluetooth is turned on 2. Go to the Devices tab in the app 3. Click on the HR monitor Screen_Shot_2021-03-23_at_10.55.52_AM.png 4. Once your HR monitor is bordered in green it is paired! Screen_Shot_2021-03-23_at_10.56.10_AM.png Pairing a Bluetooth Smart Heart-Rate Monitor (Mobile) 1. Ensure Bluetooth is turned on 2. Navigate to the Devices tab in the app 3. Tap on the heart rate monitor and wait for it to pair BLE_HR_RN1.png 4. Once the device has a green border you are connected and ready to go! BLE_HR_RN2.PNG Pairing a Bluetooth Smart Heart-Rate Monitor (Legacy) 1. Ensure Bluetooth is turned on 2. Go to the Devices tab in the app 3. Scroll down to the section for Bluetooth devices. 4. Click "Pair" TrainerRoad will look for the HR monitor 5. Wait for TR to find the HR monitor. 6. Your HR monitor is now paired! - The box will turn green and display your current heart rate once the device is paired Troubleshooting TrainerRoad not finding your heart rate monitor? 1. Make sure you're wearing your HR monitor properly. 2. Wet the strap sensors to ensure a proper connection. 3. Replace HR strap's batteries. If your having problems with your Bluetooth, check out this article on troubleshooting Bluetooth

Wahoo Blue Speed/Cadence Sensor

The Wahoo Blue S/C sensor is a popular speed/cadence sensor combo. The latest models can be paired either via ANT+ or Bluetooth Smart (4.0), and can therefore be used with TrainerRoad for speed, cadence, and VirtualPower readings. https://www.youtube.com/watch?v=hoE9zWiZ2B0 Learn more about ANT+ connectivity, or learn more about Bluetooth Smart connectivity. How to Pair Your Speed/Cadence Sensor with TrainerRoad (Mobile) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_1.png 2. Tap on the speed/cadence sensor to begin pairing. Note: ANT+ users will see the device listed as "Speed/Cadence". Wahoo_Blue_2.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Desktop) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_3.png 2. Hover over and click on the Blue to begin pairing. Once the device is bordered in green it has successfully paired. Wahoo_Blue_4.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Legacy) 1. Open the TrainerRoad application, and go to the Devices tab. Make sure you scroll down to the list of Bluetooth Smart devices. 2. Click the "Pair" button that corresponds with Speed and Cadence Sensor under the list of Bluetooth Smart devices. You will need to pair your sensor as a speed and cadence sensor even if you are using only the speed or cadence portion of the sensor. 3. Wait for your sensor to pair with TrainerRoad. You will likely need to pedal to "wake up" your sensor. 4. Your Wahoo Blue is now paired! Learn more about using your sensor with VirtualPower. Troubleshooting Check Magnet Placement The most common problem with speed/cadence sensors is magnet placement. If you aren't getting speed or cadence readings, or getting very low or very high readings, check the magnet placement on both the crank and rear wheel. You'll want the magnet to pass right next to the sensor, but not so close that it touches. Battery Life A weak battery may not be strong enough to communicate with TrainerRoad. Try replacing the battery for a stronger signal. Pair with another head unit Try pairing your speed/cadence unit with another head unit (Garmin Edge or Wahoo ELEMNT). You'll want to see if both speed and cadence readings show up. Double check to make sure that your speed source is set to your speed sensor and not to GPS.