Your First Ride

By Hilary Kinney and 2 others
• 5 articles

FTP Testing - The Cornerstone of Training

Few components of power-based training are as important as measuring and tracking FTP. In fact, it could be argued that nothing short of actual performance ranks as highly in terms of overall importance. With this in mind, we offer the following primer on what your FTP represents, what an FTP test is, how and why we assess FTP, and when we assess it. What is FTP? Functional Threshold Power (FTP) is — quite simply — a measure of fitness. FTP represents the power (measured in watts) that you could theoretically maintain for about an hour, and it's the single metric we use to scale each of your workouts in our shared quest to keep your fitness growing. With regards to what's taking place within your body and the muscles themselves, riding at your FTP pushes you right up to that limit where pushing any harder will drastically limit the duration of your ride. But as long as you stay just below that acidic tipping point where your muscles light up and uncomfortably tolerable minutes become barely tolerable seconds, your muscles are in balance with the workload - for about an hour, anyway. What is the FTP Assessment? An FTP assessment is a snapshot of your fitness at any point in time. By measuring your fitness and assigning it a number, we can track changes in your fitness over weeks, months, and years. The assessment we use to measure this level of fitness is our Ramp Test. How is FTP Calculated from the Ramp Test? TrainerRoad will automatically calculate your FTP upon completion of your Ramp Test workout. If ridden correctly, you can expect your FTP to be about 75% of your highest 1-minute power sustained during the test. Note: More complicated calculations may be applied when determining FTP from a Ramp Test depending on how accurately a rider followed the format of the test. This means, 75% of a rider's 1-minute power may not translate to their actual FTP calculation. https://www.youtube.com/watch?v=wWHgMzpvH7c How is Functional Threshold Power Assessed? During a Ramp Test assessment, riders first follow a sufficient, stepwise warming period before progressing to their higher-intensity steps. The power that you average over the last, highest minute of your test allows us to mathematically estimate your current FTP. The goal here is to obtain a reasonably close estimate of one's sustainable power, or in power-based training nomenclature, your Functional Threshold Power/FTP. Why Do We Assess FTP? By assessing FTP, not only can we track changes in fitness, but we can also establish training zones, i.e. power levels. And as your fitness changes, we can update these power levels accordingly. Each type of interval, e.g. Tempo, Sweet Spot, VO2max, etc. represents a percentage of your FTP. For example, Tempo intervals fall in the 76-90% FTP range while VO2max intervals fall in the 106-120% FTP range. Different types of intervals target different energy systems and consequently different training adaptations, so it's important to have a personal measure of your fitness that will allow us to tailor your workouts to your specific needs and capabilities. When Should I Assess My FTP? It's a good idea to assess your FTP prior to beginning each training season unless you already have a good sense of your current fitness and your sustainable power. But even if you think you have a good grasp on your current fitness, it's still a good idea to back up your perception with actual performance. It's also recommended that you assess or reassess FTP before embarking on a new training plan. Finally, you should reassess your FTP about every 4-6 weeks in order to account for changes in your fitness and to keep your power levels in line with your performance potential. What if I'm Feeling Stronger Before My Scheduled FTP Test? Of course, testing roughly every 4-6 weeks is just a general guideline. Your FTP very well may have increased prior to 4-6 weeks after your last test. If you find yourself breathing easily through workouts with high-Intensity Factors (IFs)® or that you're often manually increasing the workout intensity before it's time for your next test, don't hesitate to manually edit your FTP. No need to wait for an FTP test if you know you're stronger. :)

Last updated on Aug 13, 2026

Live Workout Display Explained

Here's a look at everything you'll see during a workout. TrainerRoad Workout View Power 1. Power Power displays your current power output. 2. Target Power Target Power is the prescribed power output you should be striving to achieve. 3. Target Power Bar The Target Power Bar represents how close you are to your target power. The bar will stay green as long as you are close to your target power. 4. Average Power Dot The white dot represents your average power for the interval. If the prescribed interval keeps you at a steady power level, you'll want to try and align the white dot with the vertical white line. Interval and Workout Time 1. Interval Time Interval Time indicates the amount of time remaining in the current interval. 2. Total Time Total Time indicates the amount of time elapsed in the workout. Heart Rate and Cadence TrainerRoad Heart Rate and Cadence 1. Heart Rate Heart Rate displays your current HR reading. 2. Cadence As long as you have a cadence sensor connected to TrainerRoad, your cadence will display in revolutions per minute (RPM). 3. Interval Summary TrainerRoad displays a prompt that appears in the upper right-hand corner of the workout screen that gives you information about the interval you just completed. If you have a heart rate monitor paired, this will also be displayed in the summary. - Interval Time/Zone: The top line indicates how long the interval you just finished was. The Zone in which the interval was performed is also noted here. - Average Power: The second line displays your average power for the interval. - Distance from Target Power: The third line indicates how close you came to your target power. So, the screenshot above indicates that the rider was two watts below their target power of 211 watts. - Precision: The fourth indicates how close you came to your target power during the interval. - Cadence: The fifth line will display your average cadence for the interval. Workout 1. Workout Profile Represented in blue, the workout's profile displays the format of the workout, including intervals and rest. The x-axis represents time, and the y-axis represents watts. 2. Vertical Yellow Line The vertical, yellow line represents the rider's current position within the workout. 3. Horizontal Colored Lines - Green: The green line represents where your power should be based on the intensity you have the workout set to. If your workout intensity is set to 100%, the green line will fall directly atop the blue workout profile. - Red: The red line represents your heart rate. - White: The white line represents your cadence readings for the ride. (Note: The white cadence line is only displayed on the post-workout graph.) - Yellow: The horizontal yellow line represents your power (or VirtualPower).

Last updated on Aug 13, 2026

Common Training Acronyms Defined

TSS, NP, IF, and FTP are terms created by Dr. Andy Coggan and are specific to cycling. Functional Threshold Power - FTP Functional Threshold Power, or FTP, is the maximum average power you can hold for one hour. So if you can hold 300 watts for one hour, that means your FTP is 300. FTP is the best single marker for fitness in cycling. The higher your FTP is, the stronger you are. In TrainerRoad, we use your FTP to scale workouts. Our workouts are structured as a percent of FTP. This means that when your FTP increases, the workouts get harder to maintain the same difficulty. Doing an all-out one-hour effort is really, really hard. It's hard to get an accurate test without it being in a race (much less indoors on a trainer). Because of this, we use the Ramp Test for FTP testing. The Ramp Test is both accurate and easy to complete for both new and experienced cyclists alike. If you would like to read up more on the Ramp Test and why we prefer it, click here. The other two most common tests to help estimate FTP are the 20 Minute Test and the 8 Minute Test. These are considered standard for FTP testing in the cycling world. We take averages of the all-out work intervals in each test and multiply them by a factor, usually .95 or .90. This gives us a good estimate of FTP. Normalized Power - NP® Normalized Power gives you an average power number if you would have ridden at a constant power output. For example, in a crit, you would have lots of power spikes and lots of coasting. This would result in a low average power. Normalized power was developed to try to figure out how much stress was actually put on your body. By using some math and weighting the really hard stuff more than the easy stuff we can figure out what your power output would have been if you would have ridden steadily the entire time. For TrainerRoad, this number is really helpful because most of our workouts have intervals with rest periods in between. Normalized Power gives you a way to compare efforts between workouts. For example, if one workout has a NP of 223 and another workout has an NP of 243 you put out more power for the second workout. Intensity Factor - IF® This is how intense a ride is. A ride with an Intensity Factor of 1.0 would equal an all-out effort for an hour. If you did an hour at .8 IF that means it was about an 80% effort. TrainerRoad has the Intensity Factor of each workout specified. This helps you gauge the difficulty of each workout. Training Stress Score - TSS® TSS is the amount of training stress generated from a workout. The higher this number, the more potential fitness you may have earned from a given ride. To gain the most fitness, you want to earn the most TSS possible. All of the workouts on TrainerRoad have a TSS score on them. This means that if you were to ride the workout exactly like it is prescribed you would earn that amount of TSS. How do TSS and IF relate to each other? Some rides can be intense, some can add a lot of fitness, some do both. A workout that is just 30 minutes long can be really intense and have an IF score of over 1.0, but that doesn't mean you'll earn a lot of TSS from it. By contrast, you can have a 2-hour ride that's not very intense, but will earn you a lot of TSS. Didn't find what you're looking for? You can find more acronyms for workout drills here.

Last updated on Aug 20, 2026

Using Workout Filters and Displaying Workouts within Plans & Teams

Riders can use the built-in Filters feature and Plans & Teams sorting categories to find the exact workout they're looking for. Mobile Filters Riders can access the Filters feature via the Training screen on their TrainerRoad iOS application. Tap the filter icon in the upper, right-hand corner to display the options. filters_RN1.PNG This screen will appear when the filter icon is tapped. Riders may sort rides by various options or select filters to display rides with specific parameters. filters_RN2.jpeg Sort By filters_RN_sort.PNG Zones filters_RN_zones.PNG Progression Levels IMG_0191.PNG Duration filters_RN_duration.PNG Intensity filters_RN_IF.PNG Mobile Teams Categories Riders can access all workouts that have been shared with their Teams via the Training tab on their mobile TR application. Tap the "Teams" button to display the options. Filters_RN_Team1.PNG Once the rider's teams are displayed, riders may select the workout they'd like to do from the team that shared that workout. Filters_RN_Team2.PNG Desktop Filters The filters for workouts on the Desktop apps can be found within the Workouts section of the apps. filters_electron1.png You can filter through Favorites, Custom or Team workouts at the top as indicated below: filters_electron_2.png Or by clicking on the filter icon in the top right to gain access to more detailed filters such as: Zones, Progression Levels, Duration, Intensity etc. filters_electron3.png Screen_Shot_2021-05-18_at_12.08.42_PM.png If you are ever unable to see the workouts you are looking for, try resetting the filters by hitting the Reset button as shown below: filters_electron_5.png Legacy AIR App Filters Riders can access the Filters feature via the Workouts tab within the desktop application. The list of filters will display on the left-hand side of the app. Before choosing workout filters, be sure to reset any previous filters that have been set. This way, only the new filters you set will be applied to the results displayed. Once filters are cleared, you can choose to display workouts within a plan, from your teams, only video workouts, and filter workouts by duration, zones, intensity, and whether or not the workout has in-workout text.

Last updated on Aug 13, 2026