Skip to content
Home General Usage Finding & Creating Workouts

Finding & Creating Workouts

15 articles

How to Use the Workout Creator on macOS Catalina

If you've recently updated your Mac to macOS Catalina, you might have realized that the Workout Creator doesn't work. That's because macOS Catalina no longer supports 32-bit applications. The Workout Creator runs on Adobe AIR (so does the old Legacy version of TrainerRoad). Although Adobe AIR and the Workout Creator are 64-bit applications, there are 32-bit components that Adobe AIR uses. These are automatically quarantined by macOS Catalina, rendering all Adobe AIR run-times impossible. You might run into an error message like this: air.png And if you've tried reinstalling Adobe AIR, you might run into an error message like this: air2.png But don't worry - we've figured out a way to get around this. It's not the simplest process, but it does work. If you're not too comfortable using Terminal, you can always access the Workout Creator on a Windows machine or a different Mac running an older macOS. We're going to try to make this as simple as possible, though. We just need to delete a file that is located in a bit of a tricky place. We've got two methods to get there. Then we'll need to use Terminal to delete the file. Method 1: Using Finder Step 1: Open Finder - You can open Finder from the Dock - it's this little icon you're probably familiar with: Screen_Shot_2019-10-16_at_10.02.21_AM.png Step 2: Navigate to Frameworks - Use the "Go" option in the menu. Click on "Go to Folder". In the dropdown menu, type in: - /Library/Frameworks Screen_Shot_2019-10-16_at_10.08.03_AM.png - Press "Enter"/"Return" or click "Go". This will navigate you to the appropriate file we want to work with. Step 3: Open Frameworks in Terminal - Right-click on the Frameworks folder. Hover your mouse over the "Services" option, and then click on "New Terminal at Folder": Screen_Shot_2019-10-16_at_9.59.19_AM.png - This should open a new Terminal window that will automatically have you navigated to the correct place. It should look something like this: Screen_Shot_2019-10-16_at_10.10.22_AM.png - Great job! Now skip down to the section below titled "Final Step: Remove Quarantined Bits" Method 2: Using Terminal Step 1: Open Terminal - The easiest way to do this is to type "Terminal" into your Spotlight Search (this is the magnifying glass in the top-right corner of your screen): Screen_Shot_2019-10-16_at_8.57.10_AM.png - Hit "Enter"/"Return" to open Terminal. Step 2: Navigate to Frameworks - You should see something like this: Screen_Shot_2019-10-16_at_8.58.50_AM.png - From there, you can start typing. If you type in cd /Library/Frameworks (and press "Return"), you'll be navigating to the Frameworks folder in the Library of your root directory. This is where you want to be in order to get to the Adobe AIR framework. - Once you do that, type in: - ls (that's a lower-case L) - Then, press "Return". That should display the folders that are now accessible. Screen_Shot_2019-10-16_at_10.30.54_AM.png - You should see Adobe AIR.framework. Now you're ready to move onto the final step. (See, this isn't so hard, is it?) Final Step: Remove Quarantine Bits - Use the ls command here (if you haven't already) to display the folders in the Frameworks directory. You should see the Adobe AIR.framework file listed there. That's our culprit. - From here, use the command: - xattr "Adobe AIR.framework" - Note that you'll need to use the quotation marks since there is a space in the file name. This command shows the extended attributes of a file. - One of these extended attributes is a file called com.apple.quarantine. These are the quarantined bits that we'll need to remove in order to get the Workout Creator working again. - To remove these, use the command: - xattr -d com.apple.quarantine "Adobe AIR.framework" - If you get a line saying that access was denied, use the command: - sudo xattr -d com.apple.quarantine "Adobe AIR.framework" - Enter your computer's password when prompted and press "Return". - Your Mac will not show that you are typing characters in the box when you enter your password - this is an intended safety feature. Simply type in your password normally when prompted and press enter when done. - Now those quarantined bits should be deleted. Screen_Shot_2019-10-16_at_9.15.30_AM.png - You can run the xattr "Adobe AIR.framework" command again if you want to double-check that the quarantine file is now gone. From there, you should be good to go! Try opening the Workout Creator now. If you're running into any additional problems, reach out to us at [email protected].

How to Upload TrainingPeaks workouts into TrainerRoad

Sync TrainerRoad with TrainingPeaks to sync custom TrainingPeaks workouts into TrainerRoad. Custom Workouts will only sync if they are scheduled within two days of the current day. Custom workouts automatically sync to TrainerRoad four times per day. To manually pull a custom workout before the automatic sync, access the following page, and select "Pull Workouts": Activity Sync Note: We don't sync any other activity types between platforms with this integration. How to Sync your Accounts: Set up Activity Sync with TrainingPeaks from your online Account settings: Activity Sync Select "Connect", enter your TrainingPeaks credentials, then authorize permission for TrainerRoad. Screen_Shot_2020-06-08_at_1.17.59_PM.png auth.png Troubleshooting Select "Re-authorize" to ensure Activity Sync is fully enabled to sync custom workouts from TrainingPeaks. Screen_Shot_2020-06-10_at_3.13.24_PM.png How to Manually Pull Custom TrainingPeaks Workouts into TrainerRoad Custom workouts automatically sync to TrainerRoad four times per day. To manually pull a custom workout before the automatic sync, access the following page, and select "Pull Workouts": Activity Sync Screen_Shot_2020-06-10_at_3.05.57_PM.png How to Build Custom Workouts in TrainingPeaks for TrainerRoad Step 1. Access your TrainingPeaks calendar: TrainingPeaks main.png Step 2. Select a present or future day on the calendar, and add a "Bike" workout. Note: We will not import non-bike workouts at this time. bike.png Step 3. Select "Build Workout". build_wkt.png Step 4. Confirm you're building your workout based on "Duration, % Functional Threshold Power, and Target". Note: You can build workouts based on a range, but we'll create the power target based on the midpoint of the range. It's recommended to use an exact power target when building workouts. build_wkt_2.png Step 5. Click or drag blocks to build your workout. (Clicking the desired block seems to work best.) click_drag_blocks.png Step 6. Within the "Workout Details Editor", adjust the time and %FTP of each interval. adjust_time_target.png Step 7. Once your workout is fully built, select "Save and Close". Custom TrainingPeaks workouts will automatically sync to TrainerRoad four times per day. If you need to sync the workout right away, manually trigger the sync from the following page: Activity Sync Note: If you'd like to include a description of your workout, the description will sync to TrainerRoad along with the workout. We won't sync any other workout details (cadence ranges, interval titles, post-activity comments, etc.). fully_built.png scheduled.png Screen_Shot_2020-06-10_at_3.19.22_PM.png Note: "TP" icons are shown on the Calendar page of the website to differentiate custom TrainingPeaks workouts. Screen_Shot_2021-01-11_at_5.02.49_PM.png

Workout Creator

TrainerRoad's Workout Creator allows you to replicate an outdoor ride, customize an existing workout or create your own personal workouts. It's available on PC and Mac. Download the Workout Creator from the following links: - Mac Download - Windows Download Note: In order to use the Workout Creator on Windows, Adobe AIR must be installed on your computer. If you don't have it, you can download Adobe AIR here. Workout Creator Features - Creating a Custom Workout - Adding Text to a Workout - Copy/Clone Workouts - Workout Snippets Frequently Asked Questions Is the Workout Creator available for iOS and Android? Workout Creator is currently only available on our Mac and Windows desktop platforms. You'll need to use a laptop or desktop to create your custom workout. But don’t worry! After you publish your Custom Workout from the Workout Creator, it will be ready to use on any of our platforms - including iOS and Android. If I have an electronic trainer, can I designate specific intervals in a custom-created workout to switch out of ERG mode and into resistance or standard mode? No. At the moment, it is not possible to create a workout that will prompt your trainer to automatically switch modes within the workout. All custom workouts will default to the last trainer setting you used. How can I import a workout from TrainingPeaks? Sync TrainingPeaks with TrainerRoad to have your custom workouts automatically sync to TrainerRoad. Note: TrainingPeaks workouts will sync to TrainerRoad two days in advance. How can I import an outside ride that I recorded with GPS? If you have a TCX file from Strava, Garmin Connect, Ride With GPS, or other mapping services, you can use a third-party app called BestBikeSplit to convert the TCX file to an ERG file which you can then import into the Workout Creator. You can learn more about that process here. Can I build workouts using a watt range instead of % of FTP? No. The Workout Creator builds workouts using an exact percent of FTP. We use percent of FTP so every workout scales to your current fitness level. You can still see the wattage while you build. Adjust the % of FTP for an interval and the Workout Creator shows the matching watts based on your current FTP. Why won't the "e" or "d" key type in the Workout Creator? On macOS, the "e" and "d" keys can be claimed by system shortcuts, which stops them from typing in the Workout Creator. The "e" key usually opens Emoji & Symbols and the "d" key usually opens dictation. Step One: Open the Apple menu and select System Settings. Step Two: Select Keyboard, then select Keyboard Shortcuts. Step Three: Select App Shortcuts in the sidebar, then select the + button. Step Four: Set Application to WorkoutCreator. Step Five: For Menu Title, enter Emoji & Symbols exactly as written. Step Six: For Keyboard Shortcut, press Option + Command + E, then select Done. Repeat those steps for the "d" key if dictation opens instead.

Importing a workout from BestBikeSplit

If you have a ride that you've recorded on your head unit or a route created through one of the many mapping applications, you can convert that file into a TrainerRoad workout. The third-party application, BestBikeSplit, allows you to download a ride file (e.g., TCX, etc.) and export it as an MRC file type. Then, you can drag the file directly into the TrainerRoad Workout Creator, and your custom workout will be generated automatically. Note: MRC file type is required to set the correct % of FTP for your interval structure, despite the option to download your file as an ERG or TrainerRoad file type. How Do I Load My Best Bike Split Race Plan Into The TrainerRoad Application? Except from the BestBikeSplit Support article: "TrainerRoad is a great indoor training tool that allows athletes to follow well thought out indoor power workouts. These workouts based on power and duration are typically called ERG (Watts vs. Time) or MRC (%FTP vs. Time) workouts. By combining your Best Bike Split race plans with indoor training provided by TrainerRoad you can start to pre train and get an accurate simulation of how it will feel on race day. We have also created a beta TrainerRoad specific file type that will be enhanced over time. Simple steps for getting race based power workouts transferred from Best Bike Split to the TrainerRoad application. 1. First you must have a Best Bike Split and a TrainerRoad account. 2. Create a Athlete Profile in Best Bike Split to get baseline information such as FTP. 3. Upload a course or courses you wish to model into Best Bike Split in .GPX Track or .FIT Activity format or choose one or more courses from our growing database. 4. Create a race plan based on Goal IF, Time or TSS. 5. From the Race Details page download the ERG, MRC, or TrainerRoad file type. 6. Open the TrainerRoad Workout Creator. 7. Drag the file from your downloads folder onto the left side of the Workout Creator. 8. Name your workout in the Workout Creator and select Publish which is on the lower right. 9. Open the TrainerRoad app and check out your BBS workout under the custom workouts. 10. START THE RIDE!" Best Bike Split is a separate company from TrainerRoad, but we’re big fans of their app and what they do. If you'd like to learn more about how we utilize BestBikeSplit, check out our blog post on How to Build a Race Day Pacing Plan.

Creating a Custom Workout

TrainerRoad's Workout Creator allows you to build your own workout from scratch or customize one of our 2000+ workouts to better fit your fitness needs. Download the Workout Creator from the following links: - Mac Download - Windows Download Note: In order to use the Workout Creator on Windows, Adobe AIR must be installed on your computer. If you don't have it, you can download Adobe AIR here. Using a Mobile Device with the TrainerRoad App? Workout Creator is currently only available on our Mac and Windows desktop platforms. You'll need to use a laptop or desktop to create your custom workout. But don’t worry! After you publish your Custom Workout from the Workout Creator, it will be ready to use on any of our platforms. Once you have completed the above steps, you are ready to customize your workouts! Here’s how it works: Video Tutorials WorkoutCreator General Usage: https://www.youtube.com/watch?v=ptkJVFs2z0s Note: The first 30 seconds of this video show our old (AIR Legacy) app. For instructions on how to open the Workout Creator from our new Desktop app, click here to find out how. Copy/Clone Workouts: https://www.youtube.com/watch?v=gDsRHFo2T4I Creating Workout Snippets: https://www.youtube.com/watch?v=GTj0NbRyQic Adding Custom Workout Text: https://www.youtube.com/watch?v=JZSksK9wfgw Open the WorkoutCreator If you don't already have the Workout Creator installed, you'll be prompted to download it from the banner at the bottom of the "Custom" tab of the Workouts section of the app. isntallWC_electron_copy.png You can either create your own workout from scratch or copy a workout to use as a template. Once you enter a name for your new workout and press "OK", you'll see the full workout creator where you can drag snippets into the base and customize however you want. Using Snippets The key to the Workout Creator is the interval snippets that can be dragged into the new workout and manipulated. Learn more about each snippet here. Manipulating the Intervals Option #1: Click and drag the interval so it's exactly what you'd like. The center dot moves the interval around in the workout. Dragging the top center dot moves the intensity up or down. Dragging the side dot will shorten or increase the length of the interval. The top corner dot slopes the interval to make progressively more difficult or easy intervals. Option #2 You can manipulate the length and intensity of an interval using the tool at the top of the screen. Add text Now that you've got a sweet workout, it's time to add some text to keep you motivated. You can also add in a workout description and goals to remind you of the workout's purpose when it's in the app just like the other workouts in the TR workout library. Publishing a workout Once you publish the workout, it will be available for you to ride in the app. The easiest way to find all of your custom workouts is to use the 'Custom Workout' filter. isntallWC_electron_copy.png Do you already have a custom workout created in a different platform? If you have an ERG or MRC file for your ride, you can import it directly into our Workout Creator. This article will show you how. If you have a GPX file from Strava, Garmin Connect, Ride With GPS, or other mapping services you can use a third party app called BestBikeSplit to convert the GPX file to an ERG file which you can then import into the Workout Creator. You can learn more about that process here. Did you make a workout and it's not showing up in the app so you can ride it? Here's how to find it.

Creating a Workout from an ERG or MRC File

Do you have workouts in ERG or MRC format you'd like to use with TrainerRoad? You're in luck! This article shows you how to import those workouts into our Workout Creator so you can use them with TrainerRoad. We currently support ERG and MRC file formats. Just drop the file on the workout list in the Workout Creator, and you'll be prompted to name the new workout. Note: Make sure the extension is all lowercase like ".mrc", though, or else it won't recognize the file type. MRC File Format Here's what an MRC file looks like: [COURSE HEADER] VERSION = 2 UNITS = ENGLISH DESCRIPTION = A description FILE NAME = blah.mrc MINUTES PERCENT [END COURSE HEADER] [COURSE DATA] 0.00 50 6.60 50 6.60 140 7.98 140 7.98 50 9.07 50 9.07 150 10.10 150 10.10 50 14.07 50 14.07 115 22.07 115 22.07 50 32.08 50 32.08 115 40.08 115 40.08 50 51.88 50 [END COURSE DATA] Some notes about the format: - Copy the course header exactly as it is. We don't use most of the fields, however, the MINUTES PERCENT line is important. It tells us what to expect in the columns. - The 'minutes' column should be in decimal format. So 10.50 is 10 minutes 30 seconds. - The PERCENT column should be separated with a tab from the MINUTES column. The values are in percent of FTP. - In general, the points should be in pairs except for the first and last point. For each time, the first entry should be the end %FTP of the last interval and the second entry should be the %FTP that the new interval starts at. - If the time changes and the %FTP changes between two consecutive points, this will create a ramp, changing linearly from the first %FTP to the second over the time difference. For example, the following snippet would create a ramp from 100% to 140% from 6.6 minutes to 7.98. 6.60 50 6.60 100 7.98 140 7.98 50 ERG File Format This is very similar to the MRC file format but you'll specify WATTS instead of PERCENT. Importing an ERG file will convert it to a %FTP workout based on your FTP. Alternatively, you can specify the FTP to use in the header as shown below. [COURSE HEADER] VERSION=2 UNITS=ENGLISH DESCRIPTION=test FILE NAME=ergtest FTP=220 MINUTES WATTS [END COURSE HEADER] Adding text cues You can also add text cues. Just add a section like this in your file after the course data section. [COURSE TEXT] 600 This is a new message 10 615 This message will show up at 10:15 into the workout 10 [END COURSE TEXT] The first column is the seconds from the start of the workout, the second is the message and the third is the duration of the message. Make sure you separate the columns by hitting the "Tab" key.

Workout Snippets

Workout snippets are prefabricated, commonly-used intervals, or sets of intervals, included in the Workout Creator. Use snippets to make creating workouts easier and faster. Walkthrough Video https://www.youtube.com/watch?v=GTj0NbRyQic Pre-Made Snippets Stepped Warm Up A nine-minute warm up consisting of increases in power every two minutes. Sweet Spot Warm Up A twelve-minute warm up that includes a three-minute interval spent at "sweet spot". 1-Minute Interval A one-minute interval with a default %FTP of 100%. 5-Minute Interval A five-minute interval with a default %FTP of 100%. 20-Minute Interval A twenty-minute interval with a default %FTP of 97%. Over Unders A five-minute series of intervals that puts the rider slightly above and below their FTP. Note: all snippets' durations and %FTPs can be manipulated. How to Add Custom Snippets Create an interval or set of intervals you'd like to add as a custom snippet. Highlight the interval(s) by clicking and dragging, and select "Add Snippet". Screen_Shot_2021-01-27_at_3.01.47_PM.png How to Use Workout Snippets Inputting snippets into your workout is as easy as clicking and dragging. Simply click the snippet you'd like to include, and drag it to the point in the workout you would like to place it. Of course, you can tweak the start/end time of the snippet once dropped in. You can also edit the intensity (% FTP) of the intervals within the snippet. I accidentally deleted a snippet. How do I get it back? You can repopulate the entire list of pre-made snippets by deleting all of them, closing the Workout Creator, and reopening it. All the pre-made snippets will reappear after this.

Group Workouts Overview

Note: Group Workouts are available in early access! To enable them, go to Account > Settings and use the toggle next to Group Workouts under Early Access. Group Workouts allow you to link up with friends, teammates, or any other TrainerRoad athlete you'd like to invite to your workout. You'll be able to see key metrics for each athlete in the workout, such as Target and Actual Power, and Heart Rate. Athletes can communicate over voice and video to feel like you are training together in the same room. The workout will be synced on the same timer, so everyone will go through the same workout at the same time. Group_Workout_cover.jpeg Why use Group Workouts? Studies have shown that training with a group of people has multiple positive effects on performance and motivation. RPE is diminished, pain tolerance increases and anaerobic performance has been shown to increase when training with others. In general, you can often get a better workout when you train together with other athletes. How to Start a Group Workout 1. Make sure you're on the latest version of the TrainerRoad desktop app (Download from the following link: TrainerRoad Download). 2. Determine a time and workout you'd like to do with others. 3. When you're ready for your workout, have the creator of your Group Workout open the TrainerRoad desktop app and access the Group Workouts section of the app. How_to_start_TrainerRoad_Group_Workout_1.png 4. Select the workout you and your group want to do, revealing the workout details drawer. 5. Make sure "Group" is selected in the top right, then select “Create Group Workout” in the bottom right. How_to_start_TrainerRoad_Group_Workout_5.png 6. A notification will appear with your Group Workout code. Select "Copy Code" to copy the code to your clipboard, and send that to up to 10 other athletes you’d like to train with. How_to_start_TrainerRoad_Group_Workout_6.png 7. Other athletes will enter this code by going to the Group Workouts section of the app by entering the code in the "Join a Group Workout" field. How_to_start_TrainerRoad_Group_Workout_7.png 8. Once everyone is in the workout, the workout host can press play and the workout will start for everyone! How_to_start_TrainerRoad_Group_Workout_8.png How to Schedule a Group Workout 1. Make sure you're on the latest version of the TrainerRoad desktop app (Download from the following link: TrainerRoad Download). 2. Select the workout you'd like to schedule. You can browse workouts from the Group Workouts or Workouts sections of the app. You can also schedule a Group Workout directly from the Calendar. How_to_start_TrainerRoad_Group_Workout_1.png 3. Select "Schedule" from the workout details drawer. How_to_Schedule_a_TrainerRoad_Group_Workout_1.png 4. Select "Group", select the time you'd like to schedule the workout for, and select "Add to Calendar". Note: Start Time is shown in your local time zone. How_to_Schedule_a_TrainerRoad_Group_Workout_4.png 5. To invite friends to your workout, send the RSVP link to add the workout directly to your friends' Calendar, or send them the workout code to join the workout immediately. How_to_Schedule_a_TrainerRoad_Group_Workout_5.png 6. If you're sending an RSVP link, your friends will enter the link directly into their internet browser, and select "Add to Calendar". How_to_Schedule_a_TrainerRoad_Group_Workout_6.png 7. If you're sending the workout code to join immediately, your friends will enter the code in the Group Workouts section of the app. How_to_start_TrainerRoad_Group_Workout_7.png 8. If you're using the RSVP link to schedule a Group Workout, the workout will now appear on the Calendar with an icon to indicate a Group Workout. Note: Workouts need to be started from the TrainerRoad app. You aren't able to start your Group Workout directly from the website. How_to_Schedule_a_TrainerRoad_Group_Workout_8-2.png How_to_Schedule_a_TrainerRoad_Group_Workout_8-1.png 9. Launch the workout from the Calendar or from the Group Workouts section of the app. How_to_start_TrainerRoad_Group_Workout_9.png How_to_start_TrainerRoad_Group_Workout_9_-_2.png Notes - Your video and audio are disabled by default. Toggle the microphone and video icons in the top-left hand corner of the Group Workout Player to enable them. - The workout host will have control of the workout, meaning they are the only athlete who can pause a workout. - Pedal to Resume/Pause functionality is disabled for all athletes during a Group Workout, including the host. - Extend warm up functionality is disabled for Group Workouts. - Workout Instructions are disabled for Group Workouts. - You won’t be booted from the workout as soon as it completes, so feel free to stick around and chat! FAQs What's the max number of athletes to a Group Workout? A maximum of 11 riders (including yourself) can be in a Group Workout. Someone's fan is drowning all other noise out. How can I fix this? For the best possible experience, we recommend configuring to have audio input set to the internal microphone on your computer and the output going to your headphones. This should minimize fan noise. If you still hear fan noise after confirming audio input is set to your computer's internal microphone, it's likely an athlete's fan has air flowing towards their computer. What internet speed do I need for Group Workouts? Group Workouts require high-speed internet for optimal data streaming. How do I share the workout code? For now, athletes need to share the code through an email, text, Forum message, or some other form of messaging service. Use discretion with who you share your Group Workout Code with. Anyone with the code can access your workout (up to 11 total athletes). Can we do a custom workout on Group Workouts? Yes, custom workouts are fully supported in Group Workouts. We plan on adding Group Workouts to our mobile apps in the future, but we don't currently have an ETA. Can multiple athletes do different workouts at the same time? Athletes need to perform the same workout at this time. What happens if I join the workout after it's started? If the workout is already started, athletes who join late will start the workout at the same time as everyone else. Does extending the cooldown affect other athletes? Extending the cooldown only affects your ride. If others want to extend the cooldown, they'll need to select this option. Does increasing/decreasing intensity affect other athletes? Increasing/decreasing intensity only affects your ride. Can we extend the warm-up in Group Workouts? To make sure athletes are synced for their workout, extending the warm-up is disabled. What if I train on a Mac but my friends train on a Windows computer? No problem! As long as you have the latest TrainerRoad desktop app downloaded on your computer you will be able to do workouts with your friends. Will this work on the mobile TrainerRoad apps? Group Workouts aren't supported in our mobile apps at this time. Adding Group Workouts to mobile is on our roadmap, however! How do I mute myself or other participants? You can mute yourself by toggling the microphone icon in the top-left hand corner of the Group Workout Player. This will not disable audio from other athletes in your group. In the future, the Host of the Group Workout will be able to mute specific athletes. You can also use keyboard shortcuts to manage audio/video settings. Screen_Shot_2020-08-10_at_12.24.25_PM.png How can I "kick" another athlete in the group? At this time, you can't kick other athletes from the group. We recommend leaving the workout if you encounter offensive behavior. We are adding the ability for the Host to kick athletes for inappropriate behavior. What happens if the host leaves the workout? Not to worry! The workout will carry on as normal if the host leaves the workout. What happens if the host never joins the workout? If the host never arrives, the first athlete to join the workout becomes the host of the workout. How do we report athletes for inappropriate behavior? Contact [email protected] to report inappropriate behavior in a Group Workout. We recommend athletes use discretion with who they share a Group Workout Code. Is there an age restriction for Group Workouts? Athletes need to be 13 years of age or older to use Group Workouts. The feature won't appear for athletes younger than 13 years of age.

How to Schedule a Group Workout

Note: Group Workouts is Temporarily Unavailable. We are working on a fix now and hope to have it re-integrated into the app soon. 1. Make sure you're on the latest version of the TrainerRoad desktop app (Download from the following link: TrainerRoad Download). 2. Select the workout you'd like to schedule. You can browse workouts from the Group Workouts or Workouts sections of the app. You can also schedule a Group Workout directly from the Calendar. GW_tab.png 3. Select "Schedule" from the workout details drawer. Schedule.png 4. Select "Group", select the time you'd like to schedule the workout for, and select "Add to Calendar". Note: Start Time is shown in your local time zone. Time.png 5. To invite friends to your workout, send the RSVP link to add the workout directly to your friends' Calendars, or send them the workout code to join the workout immediately. invite2.png 6. If you're sending an RSVP link, your friends will enter the link directly into their internet browser, and select "Add to Calendar". rsvp_link.png 7. If you're sending the workout code to join immediately, your friends will enter the code in the Group Workouts section of the app. Screen_Shot_2020-08-10_at_11.51.13_AM.png 8. If you're using the RSVP link to schedule a Group Workout, the workout will now appear on the Calendar with an icon to indicate a Group Workout. Note: Workouts need to be started from the TrainerRoad app. You aren't able to start your Group Workout directly from the website. calendar.png calendar_-_web.png 9. Launch the workout from the Calendar or from the Group Workouts section of the app. Screen_Shot_2020-08-10_at_12.10.16_PM.png Screen_Shot_2020-08-10_at_12.14.06_PM.png

Error when Joining a Group Workout

Note: Group Workouts is Temporarily Unavailable. We are working on a fix now and hope to have it re-integrated into the app soon. This error means that your computer or network is unable to establish a connection with the servers that are used to host Group Workouts. In order to establish connection, TrainerRoad needs access to specific network ports. The necessary ports needed to establish connection could be blocked by firewall, VPN, or router settings. Note: opening any ports could expose you to new security risks. - Windows Troubleshooting - Mac Troubleshooting Screen_Shot_2020-04-15_at_6.06.48_PM.png Windows: How to Adjust Connection Settings First, disable any VPN (virtual private network) services. Then, confirm the necessary ports can be accessed by TrainerRoad. In order to establish a connection, communication via TCP ports 19090, 19091, 19092, and 19093 must be allowed. To ensure the necessary ports aren't being blocked: 1. Navigate to Control Panel. 2. In System and Security, select Windows Defender Firewall. 3. Select Advanced Settings. 4. Select Inbound Rules. 5. Select New Rule. 6. Select TCP, and select Port. 7. Under Specific local ports, enter 19090, 19091, 19092, 19093, then select Next. 8. Select Allow the connection, and select Next. 9. Select Domain, Private, and Public, and select Next. 10. Enter a name for the newly created rule (e.g. 19090-19093 (TrainerRoad Group Workouts)). 11. Select Finish. 12. Navigate to Control Panel. 13. In System and Security, select Windows Defender Firewall. 14. Select Advanced Settings. 15. Select Outbound Rules. 16. Select New Rule. 17. Select TCP, and select Port. 18. Under Specific local ports, enter 19090, 19091, 19092, 19093, then select Next. 19. Select Allow the connection, and select Next. 20. Select Domain, Private, and Public, and select Next. 21. Enter a name for the newly created rule (e.g. 19090-19093 (TrainerRoad Group Workouts)). 22. Select Finish. Note: if you're using a third party firewall, these steps may vary to ensure ports 19090-19093 are available to be accessed by TrainerRoad. For further documentation on this process, refer to the following articles: - Creating an Inbound Port Rule - Creating an Outbound Port Rule If you're still receiving an error when attempting to create/join a Group Workout, please contact [email protected]. Mac: How to Adjust Connection Settings First, disable any VPN (virtual private network) services. Then, confirm the necessary ports can be accessed by TrainerRoad. In order to establish a connection, communication via TCP ports 19090, 19091, 19092, and 19093 must be allowed. To ensure the necessary ports aren't being blocked: 1. Open the Apple Menu and select System Preferences. 2. Select Security & Privacy. 3. Select Firewall. 4. Select Firewall Options (If locked, click the lock to make changes). 5. Ensure that Automatically allow signed software to receive incoming connections is checked. 6. Select OK. Note: if you're using a third party firewall, these steps may vary to ensure ports 19090-19093 are available to be accessed by TrainerRoad. For further documentation on this process, refer to the following articles: - About the Application Firewall - Check for open TCP ports using Network Utility on Mac If you're still receiving an error when attempting to create/join a Group Workout, please contact [email protected].

How to Access the TrainerRoad Workout Library and Workout Favorites

If you want to browse the TrainerRoad workout library or filter for specific workouts you can access all TrainerRoad workouts on the website and app in the list view. Here is how to Access this list. On the App Step One: Select the Workouts tab Step Two: Select List in the far right corner Screenshot 2026-01-21 at 10.35.19 AM.png Step Three: Use the search function in the upper right hand corner to find a specific workout or use the filters on the left hand side to find workouts by category. Screenshot 2026-01-21 at 10.37.57 AM.png Note: You can also add workouts to your TrainerRoad Calendar from the list view on the TrainerRoad Calendar. To do this select the +Add option in the upper right hand corner of the Calendar > TrainerRoad Workout Screenshot 2026-01-21 at 10.50.26 AM.png On the Website Step One: Select Browse Workouts Screenshot 2026-02-02 at 9.35.04 AM.png Step Two: Use the search function in the upper right hand corner to find a specific workout or use the filters on the left hand side to find workouts by category. Screenshot 2026-02-02 at 9.37.21 AM.png Note: You can also add workouts to your TrainerRoad Calendar from the list view on the TrainerRoad Calendar. To do this select the +Add option in the upper right hand corner of the Calendar > TrainerRoad Workout Screenshot 2026-01-21 at 10.48.33 AM.png How to Access Favorites Favorite workouts can be accessed from the TrainerRoad app and website from the same list view! To access favorites follow these steps: Desktop App and Web Step One: Go to Workout and select List from the Right hand menu. Screenshot 2026-01-26 at 11.47.11 AM.png Step Two: In the filters on the right scroll to Favorites and select Favorite. The select the Yes box to see your favorite workouts Screenshot 2026-01-26 at 12.14.43 PM.png Mobile App Step One: Go to Workouts and select List from the top hand navigation menu Step Two: Select the filters icon in the upper right hand corner Screenshot 2026-01-26 at 12.35.14 PM.png Step Three: Scroll to the bottom of the filters list. Select Favorite and check the box that says Yes. Screenshot 2026-01-26 at 12.37.44 PM.png Step Five: Select Apply Filters to view your favorite workouts!