Home Search Results

36 results for “Ramp Test FTP Assessment”

Found 36 results

How to Test With the Ramp Test

The purpose of an FTP test is to find your maximum sustainable power output. At TrainerRoad, we do this through the Ramp Test. The TrainerRoad Ramp Test is designed to take you until failure in order to gain an accurate FTP estimation. The test will continue until you either stop pedaling or pause the workout. It will then automatically calculate your FTP and drop you into a recovery interval. The most important advice for completing the Ramp Test is to GO UNTIL FAILURE. Each second matters during the test. Even if you only make it 10 seconds into a new step, that will still factor into your FTP calculation. It's also important to follow the target power closely as you progress through the test. Stay in the saddle the entire time and use a cadence that feels most comfortable. Check out the video below to get an in-depth look at how you should approach the Ramp test. https://www.youtube.com/watch?v=wWHgMzpvH7c For more specific Ramp Test details, click here. How It's Calculated After completing the Ramp Test, we calculate your FTP taking 75% to your highest 1-minute of power. Again, every second matters, so even if you only progress partly through your last step, it will affect the outcome. (Note: More complicated calculations may be applied when determining FTP from a Ramp Test depending on how accurately a rider followed the format of the test. This means, 75% of a rider's 1-minute power may not translate to their actual FTP calculation.) Testing on a Smart Trainer vs. Traditional Trainer When using a Smart Trainer, we do recommend using ERG Mode as it is the default for the test. That being said, a smart trainer is not required in order to complete the test. For traditional trainers, it's very important to focus on following the target profile to the best of your ability. With that, those doing the test in ERG mode do not have an advantage over individuals on a traditional trainer. When To Do an FTP Test? Generally, FTP tests are best done at the beginning of each training block (about every 4-6 weeks). This allows enough time to catch any fitness changes. Additionally, if you’ve taken an extended break from training, it’s a good idea to start with a test. Every TrainerRoad training plan automatically includes the Ramp Test for each training block If all of this seems overwhelming, you’re not alone. Many cyclists find testing cumbersome and draining. With TrainerRoad AI, you can use AI FTP Detection. This feature replaces the need to test. It uses AI to analyze your training progress, relative strengths, previous experience, and many other factors to give you an informed and data-backed FTP. More info on FTP testing tips here: FTP Testing: Tips & Strategy to Prepare for Your Next FTP Test

Assessing your Fitness Level (FTP) • Last updated on Jul 21, 2026

Understanding Power Zones

Power Zones are all defined as a percentage of your FTP. They allows us to scale workouts to each racer's individual fitness level, ensuring that everyone is working at their optimal intensity. TrainerRoad workouts target specific Power Zones that represent various aspects of your fitness. This article is an overview of each Power Zone and what that zone strives to achieve. power zones.png | | | | --- | --- | | Active Recovery | (<55%FTP) | | Endurance | (55% - 75% FTP) | | Tempo | (76% - 87% FTP) | | Sweet Spot | (88% - 94% FTP) | | Threshold | (95% - 105% FTP) | | VO2 Max | (106% - 120% FTP) | | Anaerobic Capacity | (>120% FTP) | Active Recovery (<55% FTP) Active recovery is a zone that you'll see in-between intervals as a chance to recover, catch your breath, and lower your heart rate before digging in again for the next interval. Endurance (55% - 75% FTP) Aerobic Endurance workouts are aimed at improving your aerobic-power-producing capabilities in a low-stress manner. By riding for increasingly longer periods of time, your endurance muscle fibers become more efficient at utilizing fat for fuel and sparing sugar stores for more intense efforts. Additionally, Endurance workouts can improve oxygen delivery & utilization, increase muscular resistance to fatigue, improve the integrity of connective tissue, and even help you improve your on-bike nutrition strategies. Tempo (76% - 87% FTP) Riding in the tempo range pushes you near the height of your aerobic endurance. While rather uncomfortable, working here isn't terribly stressful and it allows you to spend long durations at a constant and productive work level with little recovery. This is where many half-distance triathletes will live for 2+ hours during their bike leg. This is also where ample time is spent during long road races, especially ones with steady climbs. Sweet Spot (88% - 94% FTP) Sweet Spot intervals aim to further muscular endurance and enhance aerobic capabilities. Additional related benefits include improved sugar storage in the muscles, better utilization of fat for fuel, a higher capacity for more intense workouts later on and increased power output at moderate, predominantly aerobic intensities. Learn more in our blog post: What is Sweet Spot Training Threshold (95% - 105% FTP) By spending time very close to your FTP, riders can improve their sustainable power & muscle endurance by teaching their muscles to process high levels of lactate and acidic buildup without slowing down. Additionally, and equally as important, riders learn to tolerate the mental discomfort inherent in maintaining high levels of Functional Threshold Power. VO2 Max (106% - 120% FTP) VO2 Max efforts aim to increase your power during short, intense efforts and to expand your aerobic capacity, i.e. the ability to utilize more oxygen more effectively. They also do a good job of stressing your intermediate muscle fibers that process both fat and sugar and therefore utilize oxygen much like your slow-twitch, endurance fibers. When training time is very limited, deriving a high training benefit in minimal time is crucial - this is how you do it. Anaerobic Capacity (>120% FTP) By working at power outputs high enough to elicit very high levels of oxygen uptake, tremendous improvements in both aerobic and anaerobic power can be achieved, all in very little time. Short-duration, high-intensity repeats can be highly productive for all types of riders but are especially important for riders working on limited training time. In far less time than that required by long, slow distance approach to training, riders can develop similar aerobic capabilities - little time, high stress, comparable adaptation.

Power 101 • Last updated on Aug 20, 2026

The Basics of Base Training

Principles: The purpose of base training is to establish a foundation of fitness that will allow cyclists to build towards their physiological potential for a goal event. It may seem counterintuitive to revert to base training every year after reaching new heights of performance, but this strategy pays dividends come race season. Much like a pyramid, our fitness is built in a hierarchical fashion, with the initial work serving as a critical foundation that will eventually support a higher peak. This foundation is achieved through effective base training in which cyclists raise their fitness levels. During this phase there are various transformations happening on different levels, but for the sake of simplicity, we’ll just focus on the efficiency of muscles to transform energy into speed on the bike. As you focus your training on developing your aerobic capacity, amongst other useful adaptations, you train your body to become more efficient at turning fat into energy and producing energy aerobically regardless of its fuel. This transformation takes place within the mitochondria (the powerhouses of the cell ) in your muscles. So, as you spend more time stressing your aerobic energy system, your body adapts by creating more efficient mitochondria. This adaptation will benefit you throughout all portions of your power curve because mitochondria are involved in turning energy into speed at all different intensities. Takeaway: By following a Base training plan, you will establish fundamental aspects of your fitness capabilities. The primary focus is on aerobic endurance, muscular endurance, and form/speed/power capabilities. TrainerRoad Base Plans: General, Traditional, Polarized, and Masters So it's time for base, but you aren't sure what will work best for you... what do you do? You can use the guide below to decide which Base plan is right for you. General Base This take on Base training integrates a bit more variety than the Traditional approach. You will see a lot of Sweet Spot work, but the plan also contains VO2 max intervals and neuromuscular bursts in the Low and Mid-Volume Plans. The reasoning behind this is that most amateur athletes when training at a low-intensity will run out of time in their schedules before they really tax their endurance muscles to the limit. Through Sweet Spot work, and a mix of higher intensity work, you can attain sufficient training stress to initiate adaptation in your limited training time. - When choosing a Base plan, we've found General Base (GB) is the best choice for most athletes who don't have enough time (less than 10 hours/week) to complete a full Traditional Base. If that's you, we recommend trying one of our General Base plans to fit your schedule. - This plan initiates general fitness gains much faster (can expect FTP increase in 6-8 weeks) Learn more in our blog post: What is General Base Training? Traditional Base The Traditional Base approach requires long, low-intensity hours in the saddle. There are a few key demographics that this approach is best for: - Those recovering from injury will benefit from the gentle approach of Traditional Base - Athletes who have large amounts of time before their target events. By planning their season well in advance of their race days, riders afford themselves the option of cultivating a wider base of fitness. Completing Traditional Base prior to a General Base circuit is one way to build this huge, substantial base. Polarized Base Polarized Training spits your training into two intensities at specific volumes: ≈80% low intensity, 20% high intensity or 95/5%. This structure takes more time in the saddle to generate comparable adaptations to General Base, but less than Traditional Base. Polarized training is best for: - Experienced athletes with a strong aerobic base who can handle intense sessions. - Athletes who have the time and want to train with long endurance sessions and hard high-intensity efforts. Masters Base Masters Base plans are designed to prioritize recovery with no more than two days of Sweet Spot, or higher-intensity workouts each week. These plans work well for: - These plans are made for athlete's who need more recovery time. - Any athlete who needs more recovery time will find these plans extremely beneficial, not just masters athletes. - They can be used for athletes returning to interval training after extended time off, injury, or illness. Learn more about Masters Plans from this article: What are Masters Plans? Takeaway: For most applications, General or Masters Base is the way to go. Relevant Podcasts [13:45] Podcast 068: Sweet Spot vs Traditional Base discussion Can I Skip Base Training? Typically, we do not recommend athletes skip any training phases. You will get the fastest if you work through all three training phases in order and to completion before moving onto your next phase of training. However, every rider has different time constraints, as well as different levels of fitness and cycling backgrounds going into their structured training. Here are a few common reasons that athletes want to skip Base: - Riders with heavily experienced backgrounds who are familiar with the level of base training they have at that point in the season. These riders can decide to bypass or reduce the duration of the Base phase, and move straight into a Build phase if they have been doing structured Base outside of TrainerRoad. - Riders with mid-level or minimal experience, whose target event is less than 28 weeks away (the time it takes to complete Base/Build/Specialty). We’d suggest s/he complete the entire Base phase of training and move as far along through the Build and Specialty training plans as time will allow. See our article "Not Enough Time!" To further explore how you should structure your season with less than 28 weeks. - Riders who are mid-season and have already peaked for en event, but have 16 or fewer weeks until their next event. These athletes should first consider a low-intensity training block but can absolutely skip base and jump back into Build. This is what we call a 'rebuild' and you can learn more about how to structure around this in our "Peaking for Multiple 'A' Races" article. Takeaway: No, you should probably not skip Base Phase, however there are a few fringe cases where it is an acceptable decision. Base Training Q&A Q: Time constraints aside, how many hours per week would I need to spend base training in order to improve upon last season's fitness? A: The goal is to increase your annual training volume by 5% but not more than 15% over last year’s training volume in order to improve upon last year’s performance without overdoing it. Q: Do I really have to go this easy during Base I? It doesn't seem like I'm working hard enough to gain any training benefit. A: Properly performed, Aerobic Endurance rides (roughly 60-80% FTP) train your type IIb fibers - which are the most versatile muscle fiber type - to prefer fat over sugar, one of the key objectives of Base Training. This adaptation is negatively affected if you work too hard, so go slow so your body learns to metabolize fat and spare sugar at low, but eventually greater, effort levels. Q: Sometimes I don't have the time for the prescribed ride duration. How can I address these time constraints without missing out on the benefits of base training? A: Although athletes competing in events requiring long hours on the bike need to adapt to long rides with no breaks, riding twice daily is often the only way to log high daily base mileage and is also an excellent way to reduce body fat during Base Training. Simply break your longer rides into 2 segments and perform them at the beginning, middle and/or end of your day. Try to refrain from breaking your long weekend ride into halves, and avoid breaking rides less than 90 minutes into smaller parts whenever possible. Q: Are recovery weeks really necessary when the training intensity is already so low? A: Yes. Regardless of the low intensity, the body needs time to absorb new stress before additional stress is applied, even if that stress isn't due to high-intensity intervals or race efforts. Recovery weeks will simply drop the stress to roughly half the stress of your current phase's toughest week but keep you on the bike the same number of times in order to avoid any disruption of your training schedule. Also, there’s no reason (nor benefit) to exceed 50% FTP during Recovery Weeks unless you are certain that riding over 50% FTP is still regenerative and restful and allows your body to recover and prep for the next, more stressful, block of training. Q: Which drills should I be doing per session and how many do I do for the duration? A: The drills are briefly during the workouts themselves. As long as you haven't checked the "Hide text during workout" box on the Profile tab, and the onscreen directions will prompt you to add particular drills at particular times.

Understanding your Training Plans • Last updated on Aug 20, 2026

RPE Key Explained

Rate of Perceived Exertion (RPE) refers to a 1-10 scale to self-report the intensity of an effort. Our RPE scale is based largely on Matt Fitzgerald's running and swimming RPE scale. We use it because it falls in line with what we consider correct exertion levels for what we're trying to achieve with the workouts. How to Use the RPE Scale The RPE Scales are broken into three separate columns: Column 1 - Rate of Perceived Exertion (RPE) from 1-10 Column 1 lists the Rate of Perceived Exertion (RPE) on a 1-10 rating. Lower RPE ratings are hardly distinguishable (RPE 1-2, RPE 3-4, RPE 5-6), which is why the lower RPE ratings are collapsed into a single row. Column 2 - Effort Level Column 2 lists effort levels relative to each RPE rating (e.g. a Moderate effort should feel like a 7/10 according to your rate of perceived exertion level). Column 3 - Zone/Pacing Equivalent Column 3 lists TrainerRoad's cycling power zones, and the workout types for swims and runs that you would perform in these zones. These give cyclists and triathletes a way to more easily understand how their RPE levels compare to the effort levels of their cycling power zones. For example, riders understand what the "Endurance" power zone feels like on the bike. Using the RPE chart and knowing that "Easy-Moderate" should feel about the same RPE that "Endurance" work feels like on the bike, athletes have a better idea of how their Easy-Moderate pace should feel during running and swimming workouts. Cycling RPE scale | | | | | --- | --- | --- | | RPE 2 | Recovery | Active Recovery | | RPE 3 | Very Easy | Warm-up/Cooldown | | RPE 4 | Easy | Endurance | | RPE 5 | Comfortable | Endurance | | RPE 6 | Comfortably Hard | Tempo | | RPE 7 | Hard | Tempo/Sweet Spot | | RPE 8 | Very Hard | Threshold | | RPE 9 | Very very hard | TR VO2max | | RPE 10 | Maximal Effort | Anaerobic Capacity | Example of Outside Cycling Workout Using RPE The outside-workout equivalent of "Darwin" includes the following description: "Warm Up: - Ride for 6 minutes gradually raising your effort from RPE 4 to 7. - 4 minutes easy. Main Set: - 4x10 minutes at RPE 8 with 3 minutes easy between intervals. Cool Down: - 1 minute easy." This workout begins with a warm-up period between RPE 4-7. This effort should range from an "Easy" pace to your "Sustained Power" abilities. Relating this to Power Zones within TrainerRoad, your effort should range between 55% FTP (just above Active Recovery) to 88%-94% FTP (Sweet Spot). Your main set has you settling in at a "Threshold" pace. Relating this RPE level to Power Zones within TrainerRoad, your effort should range between 95%-105% FTP. Your cool-down period finishes your workout with an RPE 4 pace, which relates to around 55% FTP. Running RPE Scale | | | | | --- | --- | --- | | RPE 2 | Very very easy | Recovery | | RPE 3 | Very Easy | Endurance | | RPE 4 | Easy | Endurance | | RPE 5 | Comfortable | Marathon | | RPE 6 | Comfortably Hard | Half Marathon | | RPE 7 | Hard | 10k | | RPE 8 | Very Hard | 5k | | RPE 9 | Very very hard | Mile | | RPE 10 | Maximal Effort | Sprints | Examples of Run Workouts Using RPE in TrainerRoad: A running workout titled, "Run VO2max Intervals", includes the following workout description: "Run 12min working up to Easy-Moderate, RPE 6 pace to warm up, then this week repeat 18 Hard, RPE 9, 30-second high-speed surges, recovering for only 30 seconds after each; run 10min Easy, RPE 4 to cool down for a total of 40 minutes of running" This workout begins with an RPE 6 pace, transitions into several RPE 9 efforts, and finishes with what should feel like an RPE 4 cool-down period. Referring to the second column in the RPE chart, this translates to beginning the workout at an "Easy-Moderate" pace, transitioning into 18 "Hard" efforts, and cools down with an "Easy" 10 minutes of running. Swimming RPE Scale | | | | | --- | --- | --- | | RPE 2 | Very very easy | Recovery | | RPE 3 | Very Easy | Endurance | | RPE 4 | Easy | Easy Swim or Warm-up | | RPE 5 | Comfortable | Easy-Moderate Swim | | RPE 6 | Comfortably Hard | Moderate Swim | | RPE 7 | Hard | Moderate-Hard Swim | | RPE 8 | Very Hard | Hard Swim | | RPE 9 | Very very hard | Fastest Average | | RPE 10 | Maximal Effort | All Out Sprints | Examples of Swim Workouts using RPE in TrainerRoad: A swimming workout titled, "Continuous Base Swim (2400m)", includes the following workout description: "Warm-Up 300m Easy, RPE 4 1800m Easy-Moderate, RPE 6 Cool-Down 300m easy, RPE 4" This workout warms up with an RPE 4 effort, transitions into an RPE 6 effort, and cools down with an RPE 4 effort. Referring to the RPE chart, the workout begins with an "Easy" pace, moves into an "Easy-Moderate" pace, and concludes with an "Easy" cool-down period.

Triathlon Training • Last updated on Aug 20, 2026

The Basics of Build Training

Principals: During the second phase of training, the Build phase, each type of workout takes on a more event-specific purpose where greater emphasis is placed on escalating the weekly stress load via workouts that are more event-specific than what was encountered during the Base phase. This is where increasingly event-specific types of training are emphasized with the intent to improve more pertinent types of fitness while the more basic forms of fitness are mostly maintained. If you’re not training for a specific event, view this phase of training as the one in which the intent is to grow your Functional Threshold Power the most. Not only does Build phase training allow athletes to heighten their level of training specificity, it also brings their fitness to a point where middle-priority events can factor into their weekly training. Which Build Phase Training Plan is right for me? The optimal Build Phase will vary from athlete to athlete depending on their goals for the season. We recommend checking out the discipline-specific articles for a more in-depth recommendation that will relate directly to your goals and aspirations for the season. You can view these articles from the "Training Questions" section of our Help Center. Below is a brief summary of the three main types of TrainerRoad Build Training. - Short Power Build includes a healthy balance of muscular endurance work but trades an increased emphasis on VO2Max and Anaerobic efforts with a reduction in sustainable power focus. Less muscular endurance, more repeatable aerobic power. This approach suits a rider who needs more explosive, short-punchy power capabilities. Criterium racers, cyclocross competitors, and nearly all MTB & track riders fall into this category. - General Power Build is geared more towards the athlete whose discipline doesn’t require any more focus on short punchy power than it does sustainable power. Therefore, the General Power Build phase training plan fits a rider looking to capitalize on a well-rounded blend of abilities in both areas. - Sustained Power Build is focused on developing greater sustained power through the use of strength endurance work (Sweet Spot), lactate tolerance workouts (Threshold), and a healthy dose of maximum aerobic power intervals (VO2max). These areas of focus translate to the ability to sustain high percentages of FTP for increasingly long durations. - Polarized Build uses the 80/20 and 95/5 Polarized training models, where 80% of the training is done at low intensity and 20% is done at high intensity. These phases are designed to further increase an athletes aerobic capabilities, building on Polarized base. Polarized plans may require greater training volume to generate equivalent adaptions. - Masters Build Phases provides more recovery time than their standard counterparts. These can be great for any athlete who need more recovery time, while still building on the base phase for greater adaptation. There are no more than two days of Sweet Spot, or higher-intensity workouts each week. How Important is Build Training? Build Phase training is a critical step in developing cycling-specific performance capabilities and increasing your FTP which we do not recommend skipping. If you do not have enough time to complete the full Base and Build leading up to your target event, check out this article in our Blog on the methods to shorten your Training Plan. Main Takeaway: The aim of Build is not only to produce big gains in FTP but also to increase specificity as you get closer to your target event. What's Next? After the Build Phase, your next phase of training is the Specialty Phase. Click here to learn everything you need to know about the Specialty Phase.

Understanding your Training Plans • Last updated on Aug 20, 2026

Trainers With Multiple Settings

How do I set up VirtualPower if my trainer has more than one setting? Magnetic and fluid trainers have variable resistance settings, and each of these settings have their own power curve (speed-to-power ratio). For more information on how these readings are derived, learn how VirtualPower works. This graph displays each power curve for every resistance level on a single trainer. The X-axis represents speed while the Y-axis represents power measured in watts. Since each resistance setting on your trainer has its own power curve, you'll need to choose which level you're training with. How to Select a Resistance Setting Desktop Step 1: Pair your speed/cadence sensor in the Device section of the app Step 2: Select Turn On next to VirtualPower, then select the Enable VirtualPower toggle Step 3: Select the make and model for your trainer Step 4: Choose a Resistance setting (if any) from the drop-down menu Note: Make sure the resistance setting you have on your trainer matches the selection within TrainerRoad's VirtualPower settings. If you change the setting, you'll need to change the selection in TrainerRoad. Screen_Shot_2021-03-23_at_11.03.35_AM.png Mobile Step 1: Pair your speed/cadence sensor in the Device section of the app Step 2: Select Turn On next to VirtualPower, then select the Enable VirtualPower toggle Step 3: Select the make and model for your trainer Step 4: Choose a Resistance setting (if any) from the drop-down menu Note: Make sure the resistance setting you have on your trainer matches the selection within TrainerRoad's VirtualPower settings. If you change the setting, you'll need to change the selection in TrainerRoad. VP_RN4.PNG Before Settling on a Setting It's recommended that you do a couple of short test rides to familiarize yourself with the settings and which seems to work best for you if you're not familiar with your trainer and your favored resistance setting. Ideally, you'll find a setting that allows you to shift into an easy enough gear to adequately recover but also allows you to shift into a gear that provides enough resistance for hard efforts. Generally, the mid to high resistance settings work best, as lower resistance settings tend to top out at less than 200 watts. Once you've selected an acceptable resistance setting, you'll want to establish your fitness level in relation to that resistance setting. We recommend that your next step be an FTP test. Thereafter, we strongly recommend that you continue to use the same resistance setting. As mentioned above, different resistance settings have different power curves. In other words, your FTP on one resistance setting may not be the same on another — even though each setting is for the same trainer. If you eventually decide that you'd like to use a different resistance setting, we recommend that you do a new FTP test.

VirtualPower • Last updated on Aug 13, 2026

How to Use TrainerRoad AI Workouts

You can use TrainerRoad AI Workouts to train flexibly without a plan or add additional training to your plan. Each AI Workout is selected by TrainerRoad AI based on your workout history and predicted performance. What Are TrainerRoad AI Workouts? AI Workouts are one-off, intelligently chosen sessions that you can add to your TrainerRoad Calendar. AI selected workouts are chosen from the TrainerRoad library based on your recent training and predicted performance. You can add them to any day on your calendar to get a workout that fits your needs for that day. When you go to add an AI Workout to your Calendar a workout will be chosen for you based on this criteria: 1. Duration: Pick how long you want to ride for that day 2. Focus or Discipline: Choose a type of workout that matches your goals or the type of training you'd like to complete that day. Workouts are broken into Category and Zone. Category options include: Endurance, Climbing, Attacking, Criteriums, Zwift Racing, Group Rides, Cyclocross, Mountain Biking or Time Trialing Zone options include: Endurance, Tempo, Sweet Spot, Threshold, VO2 Max and Anaerobic 3. Interval Structure: Within each category of riding workouts will be broken into interval types. Choose the interval type that you would like to complete. 4. Inside or Outside: Before scheduling your workout you will have the option to choose whether you would like to complete the workout inside or outside. How to Add an AI Workout Step One: Open your Calendar (web or mobile) and select the + Add button in the upper right hand corner of the screen. Step Two: In the cycling category choose TrainerRoad AI Workout Screen Shot 2025-10-14 at 11.38.45 AM.png Step Three: Choose whether you would like to choose a workout based on Category or Zone Screen Shot 2025-10-14 at 11.41.36 AM.png Step Four: Set your ride length in the drop down Screen Shot 2025-10-14 at 11.42.50 AM.png Step Five: Scroll to the training focus (e.g., Endurance, Climbing, Attacking, Time Trial, Criterium, Cyclocross, Mountain Bike, Gravel, Zwift Race, Group Ride) or the zone (Endurance, Tempo, Sweet Spot, Threshold, VO2 Max and Anaerobic) that you would like to select a ride from Step Six: Choose the zone and type of interval structure you would like to complete and select this option Screen Shot 2025-10-14 at 11.44.00 AM.png Step Seven: Review the details of the type of workout you are selecting and click Schedule.

TrainerRoad AI • Last updated on Jan 21, 2026

Syncing Zwift with TrainerRoad

You can complete scheduled or recommended TrainerRoad cycling workouts in Zwift when you connect your Zwift account to your TrainerRoad account. Here’s how to get the sync between the two platforms set up: How to Connect Zwift and TrainerRoad You'll establish a connection between the two platforms through the TrainerRoad website: Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms Step Two: Select Connect under Zwift Screen Shot 2025-02-07 at 3.16.24 PM.png Step Three: Read and Agree to the connection terms Screen Shot 2025-01-29 at 11.56.09 AM.png Step Four: This will bring you to the Zwift login page. Login to your Zwift account here. Screen Shot 2025-01-29 at 11.57.16 AM.png Step Five: Grant access privileges between Zwift and TrainerRoad Screen Shot 2025-01-29 at 11.58.59 AM.png You have successfully synced Zwift and TrainerRoad! To confirm that the connection has been made successfully, a green border and an option to disconnect will now appear in the Zwift option on your TrainerRoad ‘Training Platforms’ page. Screen Shot 2025-01-29 at 12.00.55 PM.png What Syncs Between the Two Platforms? Upcoming TrainerRoad Workouts: Today's planned TrainerRoad cycling workout will be pushed to Zwift. This only includes cycling workouts! Planned runs will not be pushed into Zwift. Note: Ramp Tests and FTP tests will not sync to Zwift! All other indoor workouts scheduled today will be sent over to Zwift on the day that they are scheduled. Completed Zwift Activities: Workouts completed in Zwift will be pulled back into TrainerRoad. This includes run and cycling workouts! When are Workouts Synced Between Platforms? TrainerRoad Workouts: TrainerRoad Workouts scheduled for today will be pulled into Zwift almost as soon as they are scheduled. If you aren't seeing today's planned workout in the For You section of the Zwift you might not have anything scheduled for today. Completed Zwift Activities: Workouts completed in Zwift after establishing a connection between Zwift and TrainerRoad will be synced to TrainerRoad shortly after ending the workout. This sync may take a few minutes. Historical training data in Zwift won't be pulled into TrainerRoad. How to Disconnect Zwift and TrainerRoad Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms Step Two: Select Disconnect below Zwift and then Disconnect to confirm the change. Screen Shot 2025-02-07 at 2.45.12 PM.png You have successfully disconnected Zwift and TrainerRoad! You can re-enable the connection at any time by following the steps above.

Activity Sync • Last updated on May 26, 2026

Pushing an Outside Workout to Hammerhead

Activity Sync with Hammerhead allows you to automatically push scheduled TrainerRoad outside workouts to your Hammerhead devices. It also lets you import activities completed on your HammerHead devices to TrainerRoad. Here’s how to set it up! Authorize Hammerhead to Connect With TrainerRoad To begin allowing your Hammerhead devices to sync with TrainerRoad, go to the Accounts section of your Hammerhead Dashboard. Scroll down to TrainerRoad. Screenshot 2024-04-08 at 1.14.17 PM.png Click “Connect”. You’ll be prompted to enter your TrainerRoad account and Password. Then, you’ll be asked for permission to push and pull data from your account. Click “Allow” to authorize the connection. Screenshot 2024-04-08 at 1.15.34 PM.png Pushing Scheduled Workouts to Hammerhead Devices Once Hammerhead is authorized to connect with TrainerRoad, set your scheduled workout to be completed outside to sync it to your Hammerhead Devices. You can do this from the web or from any TrainerRoad app. - Note: this is not possible for the Ramp Test. The Ramp Test is not designed for outside fitness assessments. Screenshot 2024-04-08 at 1.25.24 PM.png Scheduled TrainerRoad outside workouts are made available to Hammerhead on the day that they are scheduled. You will not see outside workouts in Hammerhead in advance of the day they are scheduled. How to Manually Sync Individual Workouts to Hammerhead 1. Open a workout on TrainerRoad on the web (currently this feature isn’t available in the apps). 2. Click “Outside” to switch the workout to its outside version. 3. Click “Push to Hammerhead”. - Note: If you have other services such as Wahoo or Garmin also connected to TrainerRoad, this button will say "Push to Device". Hover over it and select Hammerhead. Screenshot 2024-04-08 at 1.34.53 PM.png Pulling From TrainerRoad and Starting a Workout Your Hammerhead devices will automatically pull scheduled or manually pushed workouts the next time they connect to the internet. When you’re ready to train, navigate to the workouts app on your Hammerhead device and open the workout you’d like to complete. Click “Follow Workout” to load the workout, then click the play button to begin. Screenshot 2024-04-08 at 5.52.11 PM copy.png How to Run TrainerRoad Workouts on Your Hammerhead To learn all about running the workout on your Hammerhead, with tips on how to edit your data fields and more check out this article: - How to Run TrainerRoad Outside Workouts on Hammerhead Bike Computers Importing Future Completed Activities From Hammerhead Cycling activities completed on your Hammerhead devices after connecting with TrainerRoad will automatically appear on your TrainerRoad calendar after completion, once your device connects to WiFi. Activities imported from a Hammerhead device will display the Hammerhead logo on the activity’s details page on TrainerRoad.com. Click on the Hammerhead logo to view the activity on the Hammerhead Dashboard. Screenshot 2024-04-08 at 4.39.53 PM.png Manually Syncing Past Completed Activities From Hammerhead Cycling activities completed on Hammerhead devices before connecting with TrainerRoad can be manually synced from the Hammerhead Dashboard or directly from a Hammerhead device. To sync a ride from the dashboard, navigate to the activity, click the 3 dot menu, and choose “Sync To…” From the options that appear, click TrainerRoad, and then click “Done”. The completed activity will then appear on your TrainerRoad calendar. Screenshot 2024-04-08 at 5.04.11 PM.png To sync a past activity directly from a Hammerhead device, make sure your device is connected to WiFi. Go to the Rides app and open the completed activity you’d like to sync. Scroll down to the Upload section and select the TrainerRoad TR logo, then click the checkmark to confirm. Disconnecting your Hammerhead account from TrainerRoad You can disconnect your Hammerhead and TrainerRoad accounts from your TrainerRoad account or from your Hammerhead dashboard. Previously synced activities won’t be deleted, but no new workouts will be pushed or pulled to or from your devices. To disconnect via your TrainerRoad account, Log in to Trainerroad.com on the web and head to your Account Profile. Select “Activity Sync” from the menu on the left-hand side of the screen, and scroll to Hammerhead. Click “Disconnect” and then confirm your choice in the popup that appears. Screenshot 2024-04-08 at 5.05.07 PM.png To disconnect via the Hammerhead dashboard, go to dashboard.hammerhead.io and click “Accounts” in the left-hand menu. Scroll to the TrainerRoad item and click “Disconnect”. To reconnect your accounts after disconnecting, redo the original authorization process from the Hammerhead dashboard.

Outside Workouts • Last updated on Apr 22, 2026