Skip to content
Home Search Results

74 results for “Calendar”

Found 74 results

Syncing ROUVY with TrainerRoad

You can complete scheduled or recommended TrainerRoad cycling workouts in ROUVY when you connect your ROUVY account to your TrainerRoad account. Here’s how to get the sync between the two platforms set up: How to Connect ROUVY and TrainerRoad You'll establish a connection between the two platforms through the TrainerRoad website: Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms  Step Two: Select Connect under ROUVY Step Three: Read and Agree to the connection terms Step Four: If you’re already logged in to ROUVY, this will bring you to the ROUVY authorization page. Click “Authorize” to confirm the connection. (If you’re not already logged into ROUVY, you’ll be prompted to do so first). After clicking “Authorize” you’ll be brought back to the Training Platforms section in the TrainerRoad settings menu. You have now successfully synced ROUVY and TrainerRoad! To confirm that the connection has been made successfully, a green border and an option to disconnect will now appear in the ROUVY option on the page. Check out this article for instructions on completing your TrainerRoad workouts within ROUVY. What Syncs Between the Two Platforms?  Upcoming TrainerRoad Workouts: Today's planned TrainerRoad cycling workout will be pushed to ROUVY.  Note: Ramp Tests and FTP tests will not sync to ROUVY! All other indoor workouts scheduled today will be sent over to ROUVY on the day that they are scheduled. Completed ROUVY Activities: Workouts completed in ROUVY will be pulled back into TrainerRoad.  When are Workouts Synced Between Platforms?  TrainerRoad Workouts: TrainerRoad Workouts scheduled for today will be pulled into ROUVY almost as soon as they are scheduled. Once a workout has been synced to ROUVY, you’ll notice the ROUVY icon appear in its footer on your TrainerRoad calendar.  Workouts sent to ROUVY will appear prominently on the day they are scheduled on the ROUVY home screen.   They’ll also appear as the first item in the ROUVY “Workouts” tab: Completed ROUVY Activities: Workouts completed in ROUVY after establishing a connection between ROUVY and TrainerRoad will be synced to TrainerRoad shortly after ending the workout. This sync may take a few minutes. Historical training data in ROUVY won't be pulled into TrainerRoad.  How to Disconnect ROUVY and TrainerRoad Step One: Navigate to Training Platforms from the Profile navigation menu on the TrainerRoad website here: Account > Connections > Training Platforms Step Two: Select Disconnect below ROUVY and then Disconnect to confirm the change. You have successfully disconnected ROUVY and TrainerRoad! You can re-enable the connection at any time by following the steps above.  Frequently Asked Questions For more information and answers to Frequently Asked Questions about ROUVY and TrainerRoad check out our FAQ article here: Training in ROUVY with TrainerRoad: FAQs.

General Usage

How to Use Broadcast Mode to Sync Heart Rate Data from Garmin Watches to TrainerRoad

TrainerRoad Athletes can sync their heart rate (HR) data from Garmin watches to the TrainerRoad app. In this guide, we will walk you through the steps to set up and use Broadcast mode on your Garmin watch, allowing you to seamlessly track your heart rate during TrainerRoad workouts. To get started, you will need the following: A compatible Garmin watch: Ensure your Garmin watch supports Broadcast mode. Refer to Garmin's documentation or product specifications to confirm compatibility, here. TrainerRoad app: Download and install the latest version of the TrainerRoad app on your smartphone, tablet, or computer. Sign in to your TrainerRoad account or Sign-up if you haven't already. Bluetooth and ANT+ connectivity: Make sure your Garmin watch and your device running TrainerRoad have Bluetooth and/or ANT+ capabilities to establish a wireless connection. NOTE: Even though many of these watches have basic Bluetooth capabilities, Broadcast mode is ONLY via ANT+ for most of the Garmin watches. For most of the Garmin watches, users cannot connect their HR data to TrainerRoad via Bluetooth. Garmin recently released a firmware update for the Garmin Forerunner 245 and 945 that now allows the watch to broadcast HR data to TrainerRoad via Bluetooth. Enabling Broadcast Mode on Your Garmin Watch 1. On your Garmin watch, navigate to the settings menu. 2. Select Settings > Sensors > Heart Rate. 3. Find the "Broadcasting" or "Broadcast Mode" option and select it. 4. Enable the Broadcast mode on your watch. You will now be able to transmit heart rate data wirelessly to other compatible devices (TrainerRoad). Pairing Your Garmin Watch with TrainerRoad 1. Launch the TrainerRoad app on your device. 2. Ensure that Bluetooth or ANT+ connectivity is turned on, on your device. 3. Navigate to the Devices page in the TrainerRoad app. 4. Look for your Garmin watch (HR) in the list of available devices and select it. 5. The box around your Garmin watch on the Devices page should be green to show it has been paired successfully. Starting Your TrainerRoad Workout 1. Choose a workout from your TR Calendar or TR Workouts page. 2. Begin the workout by tapping the "Load Workout" button. 3. Your Garmin watch will now transmit heart rate data to the TrainerRoad app. 4. The TrainerRoad app will display your heart rate data in real-time, allowing you to monitor your effort level and optimize your training. Helpful Tips: - Make sure your Garmin watch and the device running TrainerRoad are in close proximity during the pairing process for a reliable connection. - Ensure that your Garmin watch is charged sufficiently before starting a workout to avoid any interruptions. - If you encounter connection issues, try restarting your Garmin watch and the device running TrainerRoad. You can also try turning off other nearby Bluetooth or ANT+ devices that might interfere with the signal.

Pairing Your Devices

How to Estimate Training Stress with Heart Rate Data

Yes. TrainerRoad uses a machine learning model to estimate TSS based on Heart Rate data for your outside rides when a power meter is unavailable or for you runs when you have heart rate data. How to set up Heart Rate Based TSS Estimation Step One: Log in to the TrainerRoad website. Step Two: Select the Account tab and scroll to the bottom of the page. Select TSS Estimation Screenshot 2026-07-15 at 11.31.34 AM.png Step Three: Set your Max Cycling heart rate and whether or not you want TSS automatically estimated for past and future rides or if you would like to make decisions on a case by case basis. Screenshot 2026-07-15 at 11.33.37 AM.png Updating Max Heart Rate and TSS Estimation You can update your max heart rate and automatic TSS preferences at any time in the TrainerRoad app and the website by returning to these same settings or editing a ride's TSS. To do it through a ride follow these steps: Step One: Navigate to the Calendar and select the ride you would like to estimate or edit the TSS of. Step Two: Select the pencil icon in the bottom left hand corner of the ride's detail page. Step Three: Select the option that says Estimate TSS Screenshot 2026-07-15 at 11.50.28 AM.png Step Four: Make any changes you would like and select Save Screenshot 2026-07-15 at 11.48.21 AM.png Automatic TSS Estimation If you opt for All past and future rides or future rides only, your TSS will automatically be estimated using heart rate data when power data is not available and heart rate data is available. If you would ever like to manually adjust a rides TSS estimation when you have this setting on you will need to swap over to the "I Will Decide Per Ride" option in these same settings. You can adjust this setting as well as your maximum heart rate at any time. Estimating TSS for Past Rides If you opt to estimate TSS for past rides you will be prompted to confirm this choice before saving your TSS estimation settings. Screenshot 2026-07-15 at 11.35.45 AM.png Estimating TSS for Individual Rides If you opt to decide per ride whether you would like to use heart rate or RPE to estimate TSS you will be presented with the option to manually estimate your TSS on any of your rides without power data. If you would prefer to use heart rate for a ride you can select Heart-Rate Based tab under Training Stress: If you would like to use RPE-Based TSS estimation on a particular ride instead you can swap over to the RPE-Based option and select the rides intensity for an RPE based TSS estimate Screenshot 2026-07-15 at 11.42.42 AM.png

Your Ride Data & Progress

How to use AI Training Simulation

The AI Training Simulation lets you see how adjustments to your training work in real time. Whether you need to change the duration of an upcoming session, swap out a workout, or add a long weekend ride to your schedule, this feature will give you a clear view of how changes made to your plan impact your training. What Is the AI Training Simulation? The AI Training Simulation is a four week view into your training. It shows how every change you make, whether it’s a completed workout, a skipped day, an added long ride, or a rest day influences your upcoming workouts, predicted fatigue, and even your FTP. You’ll see this window highlighted on your TrainerRoad calendar, updating live as TrainerRoad AI recalculates your training plan with each change that you make. Screenshot 2026-01-21 at 8.38.54 AM.png How to use the AI Training Simulation Inside the AI Training Simulation Window, you’ll notice dynamic, real-time updates that reflect how TrainerRoad AI is managing your training. Every completed workout, added ride, or calendar adjustment can change how the next four weeks unfold. 1. Plan Your Training When you add a training plan to your Calendar with Plan Builder or add TrainerRoad workouts to your Calendar TrainerRoad AI will make changes to your planned workouts using your current fitness, fatigue, and training goals. This selection updates instantly when changes happen. This includes completing a ride, adding upcoming outside rides, missing workouts, or making any sort of changes to your schedule. You’ll see workouts automatically update across the Simulation Window. 2. Monitor Rest and Recovery TrainerRoad AI continually monitors your training load and recovery needs to prevent unproductive fatigue. TrainerRoad AI uses yellow and red highlights on your Calendar to indicate where you might need to back off or take extra rest. - Avoid Intensity days indicate mild overreaching. You may see an easier workout assigned on a day with a yellow highlight to allow for recovery. - Recommended rest days suggest higher levels of fatigue. On these days scheduled workouts may be swapped out for full rest days. - Screenshot 2026-01-21 at 8.46.49 AM.png 3. Track Changes to Your FTP If your next AI FTP Detection falls within the four week Simulation Window, you’ll see a projected FTP value based on your current trajectory. This forecast helps you understand how your training affects your FTP. It’s especially useful for gauging whether your recent efforts and upcoming plan are aligned with your goals. Screen Shot 2025-12-30 at 4.37.19 PM.png 4. Know Your Upcoming Workouts Difficulty Each workout includes a predicted difficulty rating based on how TrainerRoad AI expects it to feel. This rating is based on workout design as well as your recent training and performance. Ratings include: Easy, Moderate, Hard, Very Hard, Maximal Effort and Fail. When you open up any given workout in TrainerRoad you will see each rating with how likely that workout will feel for you in each given difficulty zone. Screenshot 2026-01-21 at 8.41.52 AM.png Knowing your workouts predicted difficulty can help with pacing, nutrition planning, and managing expectations before key workouts. Frequently Asked Questions How do I know if I’m in the AI Training Simulation? The AI Training Simulation Window is always visible on your calendar as a highlighted 28-day block starting from today. Any workouts inside this window are actively managed and updated by TrainerRoad AI as your training evolves. What happens when I skip or change a workout? TrainerRoad AI instantly recalculates your plan. You’ll see upcoming workouts update one by one to reflect your new fatigue level, fitness adaptations, or recovery needs. This includes changes to intensity, duration, and workout type. What are the yellow and red highlights on the Calendar? These are recommended rest days and avoid intensity days. - Avoid Intensity = mild fatigue. TrainerRoad will put a yellow highlight on an avoid intensity day and may adjust upcoming workouts to be easier. - Recommended rest day = higher fatigue. You may see recommended rest days appear on days where red appears in your Calendar. Why is my predicted FTP changing? If you’re scheduled for an AI FTP Detection within the Simulation Window, TrainerRoad AI will show a forecast of what your FTP is expected to be by that date. You might see changes after completing or skipping workouts as well as making any changes to your upcoming schedule. Do I need to take any action on these updates? Nope. TrainerRoad AI handles everything behind the scenes. But if you want more control, you can always modify, replace, or restore workouts and the AI will adapt accordingly.

TrainerRoad AI

How to Adjust Training Approach Overall and by Zone

You can fine tune how conservative or aggressive TrainerRoad AI is with it's adjustments to your training and rest in your Training Approach settings. Make changes to TrainerRoad AI's entire training approach or get specific about your training with adjustments to each training zone's training demand. How to Adjust Overall Training Approach If you would like to set one training approach for your entire training plan you can set your approach when you build a custom training plan or edit your plans training approach through the TrainerRoad Calendar. New Plan: Step One: Login to your TrainerRoad account on the TrainerRoad website. Step Two: Select the Training Plans tab and begin building a custom training plan. Step Three: When you reach the Training Approach page opt for the training approach you would like for your entire training plan. Screen Shot 2025-12-30 at 4.17.28 PM.png Step Four: Finish building out your training plan. Your training approach will be set! Existing Plan: Step One: Login to your TrainerRoad account on the TrainerRoad website. Step Two: Select the Calendar tab from the navigation menu. Step Three: Select your training approach in the upper right hand corner of the screen or find the nearest training approach annotation on your Calendar and select that. Screen Shot 2025-12-30 at 4.06.33 PM.png Screen Shot 2025-12-30 at 4.11.30 PM.png Step Four: Select the pencil at the bottom of the current training approach menu. Step Five: Adjust the sliding bar to your desired training approach. Screen Shot 2025-12-30 at 4.08.56 PM.png Step Five: Hit Save! How to Adjust Training Approach by Zone You can tailor adjustments to the training approach of individual zones in your training approach settings or when you set up your training plan with Plan Builder. New Plan: Step One: Login to your TrainerRoad account on the TrainerRoad website. Step Two: Select the Training Plans tab and begin building a custom training plan. Step Three: When you reach the Approach step select the box that says Customize by Zone Screen Shot 2025-12-30 at 4.01.25 PM.png Step Four: Adjust each scale to the training approach you would like to target for that zone. Each zone will progress independently based on the settings you select. Screen Shot 2025-12-30 at 4.02.43 PM.png Step Five: Select Generate Plan to finish building out your plan! Existing Plan: Step One: Login to your TrainerRoad account on the TrainerRoad website. Step Two: Select the Calendar tab from the navigation menu. Step Three: Select your training approach in the upper right hand corner of the screen or find the nearest training approach annotation on your Calendar and select that. Screen Shot 2025-12-30 at 4.06.33 PM.png Screen Shot 2025-12-30 at 4.11.30 PM.png Step Four: Select the pencil at the bottom of the current training approach menu and select Customize by Zone Screen Shot 2025-12-30 at 4.21.27 PM.png Step Five: Adjust each scale to the training approach you would like to target for that zone. Each zone will progress independently based on the settings you select. Screen Shot 2025-12-30 at 4.29.21 PM.png Step Six: Select Save to save your updated settings! What Training Approach Should I Choose? For most athletes, a more balanced approach will be the best fit! The balanced approach doesn’t place extra emphasis on intensity or recovery making it a good fit for most athletes. If you are unsure what setting is right for you we recommend starting with the balanced approach and only making incremental adjustments based on how this approach works for you. If you are looking to prioritize recovery in all zones (or a few in particular) then a more conservative approach might be the best setting for you. Choosing a more conservative setting is a good fit if you are someone who has trouble getting quality sleep, is managing a lot of additional stressors outside of your training, or needs extra time to recover from hard training sessions. If you are looking to prioritize intensity and know that you can manage potential burnout then the aggressive setting might be a good fit for you. It is important to note that you are at higher risk of burning out if you choose the overall more aggressive Training Approach or change several zones to be more aggressive. For this reason, we only recommend choosing the aggressive setting if you are an experienced cyclist who manages recovery well and has the time and knowledge to stay on top of nutrition, rest, and sleep.

TrainerRoad AI

How to Add Group and Solo Rides to your Training Plan

Following a custom TrainerRoad training plan doesn’t mean you have to stop doing the rides that made you fall in love with the sport. Do you have a local group ride that happens every week? Or maybe you just want to go on a solo ride on the weekends without worrying too much about following a structured workout. If you’ve ever wondered how to fit those rides around your training plan, we’ve made it easy. Now you can build those rides right into your training plan using Plan Builder! Not using a custom plan? Not a problem. You can scroll to the bottom of the article for steps on how to add Group and Solo Rides to your Calendar. How to Create a Plan with Group or Solo Rides Proceed through Plan Builder, on the desktop app, mobile app, or TrainerRoad website, until you reach the Training Schedule step. At this step, you’ll see a preview of what a typical week will look like in your training plan. Each workout can be set to a TrainerRoad Indoor Cycling ride or one of our three Outdoor Cycling options: TrainerRoad Outside, Group Ride, and Solo Ride. Choose which day(s) you want to do a Group Ride or Solo Ride. Each training day of the week has a “difficulty” associated with it: You'll see “Hard Intervals”, “Endurance”, “Easy Ride”, or "Hard Ride". If you swap a “Hard Intervals” day to be a Group/Solo Ride, it will change to a “Hard Ride”. Don’t worry about doing structured intervals that day, but try to go hard whether you’re riding in a group or on your own. And if that ride ends up being particularly brutal, Red Light Green Light will make sure you get proper recovery to avoid burnout. For days that call for Endurance or Easy Ride, try your best to do what your training plan would have prescribed. If you know your ride is going to be hard, we recommend scheduling it on a day that would have been “Hard Intervals”. You can also set the duration of Group Rides and Solo Rides in Plan Builder. From a short 30-minute ride, up to 5 hours long. How It Works Once added to your Calendar, you’ll see Group Rides and Solo Rides built right into your training plan! In place of Progression Levels, you’ll see the difficulty of the day on each workout. And when you open those rides, you’ll have training guidance on how to approach that ride based on the difficulty that the plan calls for. AllCopy.png If a Group or Solo Ride happens to fall on a Red or Yellow Day, they’ll adapt accordingly. Hard Rides will adapt to be Easy Rides, and any ride will adapt to a Rest Day. Screenshot 2024-07-03 at 14.42.02.png How to Replace Workouts with Group or Solo Rides You can replace TrainerRoad workouts in existing training plans with Group or Solo Rides, or vice-versa, right on the Calendar. To change a single workout on your Calendar, simply right-click on the workout you need to change and choose Ride Solo or Ride With a Group from the pop-out menu. To change one of your recurring weekly workouts, click on the plan or training phase annotation on your Calendar (e.g. the name of your plan on your starting date or your Base, Build, Specialty phase) to bring up the Training Plan Overview window. Hover over your Training Days and click Edit Weekly Schedule. You can also click "Edit Plan" to re-enter the Plan Builder flow until you reach the Training Schedule section. From here, you can change any training day of the week to be Indoor Cycling, or Outdoor Cycling with an option of TrainerRoad Workout, Group Ride, or Solo Ride. You can also adjust the duration of each day’s workout, and drag-and-drop each workout to any day of the week. After you’ve made your desired changes, click Update and confirm that you want to overwrite your original plan settings and any previous edits you’ve made. How To Add a Group or Solo Ride Without a Custom Plan 1. Navigate to your TrainerRoad Calendar. 2. Click on the day you want to schedule a Group or Solo Ride. 3. From the menu, choose either "Solo Ride" or "Group Ride" from the menu. 4. Set this ride to be a Solo or Group Ride and fill out the rest of the ride details. Note: You can schedule these rides to repeat in your Calendar, so you won't have to add a ride each week or month if it repeats.

Your Plan & Calendar

Pushing an Outside Workout to Garmin

TrainerRoad cycling workouts can be pushed to Garmin head units via Outside Workouts. Here are the steps to make that possible. - Planned swim and run workouts cannot be pushed to Garmin. Authorize Garmin Sync To allow outside workouts to push to Garmin Connect, set up Activity Sync to include pushing workouts from TrainerRoad to Garmin. If you have previously set up Activity Sync, you will need to re-authenticate to enable this. Allow TrainerRoad to share data with Garmin Connect by enabling all the toggles. - Note; the "Historical Data" toggle is disabled by default. Manually enable it for your training history to sync to TrainerRoad. Screenshot 2025-12-16 at 08.47.09.png You can Learn more here: - How to Run TrainerRoad Workouts on Your Garmin Edge Scheduling a Workout Once workout push is enabled, todays scheduled TrainerRoad outside workouts will be pushed to Garmin Connect. - Only cycling workouts set to be completed outside will sync to Garmin Connect. - Please note that this is not possible for any TrainerRoad FTP Tests. - We strongly encourage athletes to complete FTP Tests inside for safety and accuracy. If you would like to complete an FTP test outside, you can manually complete an FTP test of your preference, and manually update you FTP in your TrainerRoad account. - Workouts will be pushed to Garmin the day that they are scheduled. - Workouts scheduled outside of today will be "Scheduled for Garmin", and won't appear on Garmin Connect yet. Screenshot_2023-01-13_at_08.43.58.png Once a workout is "Pushed to Garmin", it will appear on your Garmin Connect calendar. Screenshot_2023-01-13_at_08.47.41.png Screen_Shot_2019-06-04_at_2.57.13_PM.png Starting a Workout To start a workout, turn on your Garmin head unit and make sure it connects to your mobile device via Bluetooth. When this happens, your Garmin Connect account will send the workout to your head unit. You should see a "Download Complete" message on your Garmin when it has finished syncing. 49.bmp Once this is complete, navigate to your workout screen where you should be prompted to complete your scheduled workout. 31.bmp Note: If you aren't prompted to start your scheduled workout, it may be visible from your Training Plan/Calendar. TrainerRoad Recommended Setup For the closest thing to a TrainerRoad workout, we recommend creating a custom screen with the following Data Fields. To learn how to get the most out of your outside workouts visit our Outside Workout Best Practices article. new_screen_1.bmp Time to Go - Nested under the "Workouts" category. - Shows how much longer the current step of a workout is. Target - Nested under the "Workouts" category. - Shows your target power and average power for the current interval. 3 Second Power - Nested under the "Power" category. - Shows smoothed instantaneous power. Workout Comparison - Nested under the "Workouts" category. - Displays a graphical representation of your workout. Heart Rate - Nested under the "Heart Rate" category. - Displays current heart rate. Cadence - Nested under the "Cadence" category. - Displays current cadence. Note: Make sure you're on the latest firmware version to access the updated data fields. *For older generation Edge devices and all Garmin watches without the Time to Go field, we suggest Lap Time as an alternative. For more detailed information on how to create a custom screen, go here.

Outdoor Workouts

Workout Levels

Workout Levels are a metric within TrainerRoad that provide a way to easily compare the difficulty of workouts. Workout levels compare the relative difficulty of workouts within each energy system and training zone. They range from 1 to 10, with 1 representing an easy workout and 10 being a very difficult one. How are Workout Levels calculated? Workout Levels go beyond traditional metrics, like Training Stress Score (TSS) and Intensity Factor (IF). They utilize TrainerRoad AI's data-driven insights and incorporate nuanced factors such as repetition, interval length, and recovery time to quantify the relative difficulty of each TrainerRoad workout. The result is workout difficulty rankings that are based on real-world experience and easy to understand. Workout Levels are unique to TrainerRoad, using a formula derived from machine learning and based on our extensive data set. Where are Workout Levels displayed? The primary Workout Level for a workout is displayed on the workout profile alongside other workout information such as duration, TSS, and IF. You will see the workout level on all TrainerRoad workouts: Screenshot 2026-07-16 at 3.09.40 PM.png Workout Levels on the Calendar You will also see a workouts primary Workout Level in the upper left hand corner below the title of the workout when viewing an individual workout: Screenshot 2026-07-16 at 3.11.31 PM.png Primary Workout Level for an Individual Workout Note: The only structured workouts without Workout Levels are FTP assessments and custom workouts. When viewing a TrainerRoad workout you will also see the other Workout Levels targeted in any given workout in the Workout Levels chart below AI Predicted Difficulty. These levels show the performance targets for that particular workout relative to your current FTP: Screenshot 2026-07-16 at 3.18.07 PM.png FAQ How are these different from my individual Athlete Levels? Your individual Athlete Levels are a representation of your capabilities within the context of Workout Levels. Workout Levels are ML-driven quantifications of the relative difficulty workouts. Athlete Levels show your relative current abilities across Training Zones. You can check your Athlete Levels in your Career in the relative zone to check what difficulty of workouts are right for you based on your current abilities. Are Workout Levels always comparable? While Workout Levels do give you a good sense of how a workout might compare relative to another workout in TrainerRoad, Workout Levels are not strictly comparable even within one zone. How a workout feels to you can vary from one workout to the next based on the overall structure and duration of the workout. For this reason we recommend using AI Predicted Difficulty alongside Workout Levels for more insight into how your planned training might feel. Are Workout Levels personalized to each athlete? No. Workout Levels are assigned to a specific workout based on its difficulty and are calculated regardless of an athlete's abilities. Individual Athlete Levels are unique to each athlete. Your Progression Levels give you an indication of what workout difficulty you will be capable of completing. Will my custom workouts have Workout Levels? No, custom workouts do not currently have Workout Levels. Will Outside Workouts have Workout Levels? Yes. Every Outside Workout in the TrainerRoad workout library will have Workout Levels assigned to them. If you find an Outside Workout that doesn't have Workout Levels, please contact [email protected]

TrainerRoad AI

How to Adjust Duration with Dynamic Endurance

Dynamic Endurance is TrainerRoad AI’s way of making sure your endurance rides meet your current fitness and training needs. You can set a max duration when you build a plan with Plan Builder and your training plan will steadily raise the duration of your weekend endurance rides. Dynamic Duration.png What Is Dynamic Endurance? When TrainerRoad AI detects that you may benefit from more or less endurance volume, it can recommend slightly longer or shorter workouts. These adjustments help you get the most out of your training while staying fresh and avoiding burnout. For example: - If you’re handling your training well, TrainerRoad AI may extend your next endurance ride or interval session to help you continue progressing. - If your recent workouts have been especially tough or fatigue is trending upward, TrainerRoad AI might shorten a session to support recovery. Adjustment will be made to your endurance workouts based on the available endurance time you have in your Training Approach settings. You can increase or decrease your available training at any time in Plan Builder. How to Set Available Endurance Time in Plan Builder You control the limits that Dynamic Endurance works within by setting your available training time during plan setup or anytime afterward. Here's how to make adjustments to your available endurance time when you setup a plan with Plan Builder: Step One: Login to Your TrainerRoad Account on the TrainerRoad website Step Two: Go to the Training Plans tab and begin building out your custom plan Step Three: Select the Training Approach page Step Four: In the schedule step your weekend endurance ride will have an additional drop down. Your workout will automatically be set to Dynamic. - Note: You will only see Dynamic Endurance appear on your schedule when you have an endurance workout scheduled. You can add an endurance ride to your plan by adding an additional day of training if you are on a three day plan with three intense workouts per week or by swapping three hard days for two hard days. Step Five: In the drop down below you can set a maximum amount of time for the duration of your dynamic endurance workout. Screen Shot 2025-12-30 at 2.28.24 PM.png - Note: Workouts will not automatically be set at the maximum duration. Your training plan will gradually work up towards the maximum duration that you have set based on completed training sessions. Step Six: Finishing Building out your training plan! How to add a Dynamic Endurance Workout Outside of Plan You can also add dynamic endurance workouts to your schedule outside of a training plan or in addition to a training plan. You can add one dynamic endurance workout or you can create a re-ocurring dynamic endurance workout. Step One: Go to your TrainerRoad Calendar on the TrainerRoad website. Step Two: Select the +Add option in the upper right hand corner of the screen. Step Three: Select TrainerRoad AI Workout from the navigation menu Screen Shot 2025-12-30 at 3.28.20 PM.png Step Four: Choose the Sustained Power option in the Endurance category. Screen Shot 2025-12-30 at 3.30.25 PM.png Step Five: Hit Schedule in the bottom right hand corner of the workout description. Step Six: Set the workout to Dynamic and select the maximum duration for your dynamic workout! A dynamic workout will then be placed on your Calendar. Why are Endurance Rides Capped at Five Hours? TrainerRoad caps endurance rides at five hours not because you can’t go longer, but because you don’t need to. Five hours is the highest recommended duration for structured endurance training. From a physiological standpoint, going longer isn’t necessary to build endurance, improve performance, or replicate race day conditions. TrainerRoad AI focuses on training the right energy systems, progressing your fitness with smarter volume increases over time. Longer rides require significantly more recovery, which can interfere with your training consistency and lead to setbacks. That’s why TrainerRoad AI won’t trend your workouts up to match ultra-distance events like a 9-hour race. Instead, it builds toward the five-hour cap in manageable 15-minute increments only increasing duration when your fitness and fatigue levels allow.

TrainerRoad AI

Pushing an Outside Workout to Hammerhead

Activity Sync with Hammerhead allows you to automatically push scheduled TrainerRoad outside workouts to your Hammerhead devices. It also lets you import activities completed on your HammerHead devices to TrainerRoad. Here’s how to set it up! Authorize Hammerhead to Connect With TrainerRoad To begin allowing your Hammerhead devices to sync with TrainerRoad, go to the Accounts section of your Hammerhead Dashboard. Scroll down to TrainerRoad. Screenshot 2024-04-08 at 1.14.17 PM.png Click “Connect”. You’ll be prompted to enter your TrainerRoad account and Password. Then, you’ll be asked for permission to push and pull data from your account. Click “Allow” to authorize the connection. Screenshot 2024-04-08 at 1.15.34 PM.png Pushing Scheduled Workouts to Hammerhead Devices Once Hammerhead is authorized to connect with TrainerRoad, set your scheduled workout to be completed outside to sync it to your Hammerhead Devices. You can do this from the web or from any TrainerRoad app. - Note: this is not possible for the Ramp Test. The Ramp Test is not designed for outside fitness assessments. Screenshot 2024-04-08 at 1.25.24 PM.png Scheduled TrainerRoad outside workouts are made available to Hammerhead on the day that they are scheduled. You will not see outside workouts in Hammerhead in advance of the day they are scheduled. How to Manually Sync Individual Workouts to Hammerhead 1. Open a workout on TrainerRoad on the web (currently this feature isn’t available in the apps). 2. Click “Outside” to switch the workout to its outside version. 3. Click “Push to Hammerhead”. - Note: If you have other services such as Wahoo or Garmin also connected to TrainerRoad, this button will say "Push to Device". Hover over it and select Hammerhead. Screenshot 2024-04-08 at 1.34.53 PM.png Pulling From TrainerRoad and Starting a Workout Your Hammerhead devices will automatically pull scheduled or manually pushed workouts the next time they connect to the internet. When you’re ready to train, navigate to the workouts app on your Hammerhead device and open the workout you’d like to complete. Click “Follow Workout” to load the workout, then click the play button to begin. Screenshot 2024-04-08 at 5.52.11 PM copy.png How to Run TrainerRoad Workouts on Your Hammerhead To learn all about running the workout on your Hammerhead, with tips on how to edit your data fields and more check out this article: - How to Run TrainerRoad Outside Workouts on Hammerhead Bike Computers Importing Future Completed Activities From Hammerhead Cycling activities completed on your Hammerhead devices after connecting with TrainerRoad will automatically appear on your TrainerRoad calendar after completion, once your device connects to WiFi. Activities imported from a Hammerhead device will display the Hammerhead logo on the activity’s details page on TrainerRoad.com. Click on the Hammerhead logo to view the activity on the Hammerhead Dashboard. Screenshot 2024-04-08 at 4.39.53 PM.png Manually Syncing Past Completed Activities From Hammerhead Cycling activities completed on Hammerhead devices before connecting with TrainerRoad can be manually synced from the Hammerhead Dashboard or directly from a Hammerhead device. To sync a ride from the dashboard, navigate to the activity, click the 3 dot menu, and choose “Sync To…” From the options that appear, click TrainerRoad, and then click “Done”. The completed activity will then appear on your TrainerRoad calendar. Screenshot 2024-04-08 at 5.04.11 PM.png To sync a past activity directly from a Hammerhead device, make sure your device is connected to WiFi. Go to the Rides app and open the completed activity you’d like to sync. Scroll down to the Upload section and select the TrainerRoad TR logo, then click the checkmark to confirm. Disconnecting your Hammerhead account from TrainerRoad You can disconnect your Hammerhead and TrainerRoad accounts from your TrainerRoad account or from your Hammerhead dashboard. Previously synced activities won’t be deleted, but no new workouts will be pushed or pulled to or from your devices. To disconnect via your TrainerRoad account, Log in to Trainerroad.com on the web and head to your Account Profile. Select “Activity Sync” from the menu on the left-hand side of the screen, and scroll to Hammerhead. Click “Disconnect” and then confirm your choice in the popup that appears. Screenshot 2024-04-08 at 5.05.07 PM.png To disconnect via the Hammerhead dashboard, go to dashboard.hammerhead.io and click “Accounts” in the left-hand menu. Scroll to the TrainerRoad item and click “Disconnect”. To reconnect your accounts after disconnecting, redo the original authorization process from the Hammerhead dashboard.

Outdoor Workouts