Skip to content
Home Search Results

37 results for “Pairing”

Found 37 results

Device Pairing Troubleshooting

Having problems pairing a device? Let's figure out what's going on with your device to get you back up and running. Device Walkthroughs We have detailed walkthroughs for all the different types of devices along with individual troubleshooting for different types of devices. Device Walkthroughs Problems with Bluetooth Smart (4.0) Detection devicetroubleshooot_electron.png device_troubleshootRN.PNG If TrainerRoad can't detect your Bluetooth Smart (4.0) devices on your computer we have an article that will help you with the system and hardware requirements. Bluetooth Smart (4.0) Requirements Problems with ANT+ USB Stick Detection devicetroubleshooot_electron.png device_troubleshootRN.PNG If TrainerRoad can't find your ANT+ USB Stick we have a troubleshooting article to help you get going. ANT+ USB Stick Troubleshooting WiFi Signal Interference ANT+ and Bluetooth both operate on 2.4 ghz and can be affected by WiFi routers, microwaves and other bluetooth devices. If you're having pairing/drop out issues it's best to eliminate these variables and then bring them back one at a time. If you find that a WiFi router is interfering, read our WiFi troubleshooting article. Other problems If you are still experiencing problems please check out our device dropout article. Device Dropout Troubleshooting Sensor Battery When a device battery gets low, the reception gets worse. Try replacing the device battery. Some devices report their battery condition over ANT+ and we display that on the Devices page. But it is not a universal feature, and speed/cadence sensors can't report it due to a protocol limitation. If your head unit picks up the signal, but TrainerRoad does not, try moving your bike setup closer to your ANT+ USB stick. Sometimes a couple feet can make a big difference. Still having issues? Drop us a line at [email protected] and we'll get any device pairing issues you have sorted out.

Pairing & Connection Problems

CycleOps PowerTap Power Meter

How To Pair an ANT+ Power Meter https://www.youtube.com/watch?v=zrws5n1Ks_Q Pairing your PowerTap (Desktop) Follow these instructions if you're on Windows or Mac: Step 1: Open the TrainerRoad app, go to the Devices section, and confirm ANT+ displays as "On" (top, right-hand corner of the window). PowerTap1.png Step 2: Wake up the power meter by pedaling, hover over the Power Meter tile, and click to begin pairing. Pairing is complete when your power meter is bordered in green. PowerTap2.png Step 3: After it's paired, click on the power meter tile again to open the Device Settings menu. From here, select "Calibrate". You're ready to ride after you calibrate. PowerTap3.png Pairing your PowerTap (Mobile) Follow these instructions if you're on iOS or Android: Step 1: Open the TrainerRoad app, navigate to the Devices section, and make sure ANT+ displays as "On". PowerTap4.png Step 2: Wake up the power meter by pedaling, and tap on the Power Meter. The power meter is paired when it's bordered in green. PowerTap5.png Step 3: Tap on the power meter again to drill into the device settings. PowerTap5.png Step 4: Tap "Calibrate". You're ready to ride after you calibrate. PowerTap6.png Pairing your PowerTap (Legacy) Follow these instructions if you're on the Legacy app: Step 1: Open the TrainerRoad app, and go to the Devices section. If you're seeing "ANT Channel Error", make sure your ANT+ is set up properly. Step 2: Select Pair next to Power Meter Make sure that the signal is displaying as either "Good" or "Excellent". Anything less might give you odd data when TrainerRoad is straining to pick up the signal. Step 3: Make sure that Enable VirtualPower is UN-checked. If VirtualPower is enabled, TrainerRoad will ignore readings from power meters and derive power from speed readings. Make sure to un-check the box pictured below. You're now ready to ride!

Trainers & Power Meters

Wahoo KICKR Pairing Process

The Wahoo KICKR is a smart trainer that uses both Bluetooth 4.0 and ANT+ to communicate with TrainerRoad for the ultimate indoor training experience. Pairing the Wahoo KICKR (Mobile) 1. Open the TrainerRoad app and go to the Devices screen. Make sure that either Bluetooth or ANT+ is enabled and your KICKR is plugged in and awake. image_1.png 2. Tap the KICKR option to initiate the pairing process. Once paired, the KICKR will rise to the top of the list, bordered in green. image_2.png 3. Tap the KICKR once more to open the Device Settings screen. From here, you can perform a spindown calibration, rename the device, select the mode, and specify PowerMatch options. image_3.png 4. Perform a Spindown Calibration. Tap "Calibration" in the Device Settings screen. image_4.png You're now ready to ride! Note: KICKR v5's and newer models (any model past 2018) automatically calibrate on the fly as you ride. There's no need to calibrate manually with a spindown due to this functionality. You can learn more about this self-calibrating process here. Pairing the Wahoo KICKR (Desktop) 1. Open the TrainerRoad app and go to the Devices screen. Make sure either ANT+ or Bluetooth is turned on. 2. Search for the Wahoo KICKR and click on it to pair. The device box will be highlighted green one pairing is successful. Bluetooth: You will need a BLED112 USB dongle to pair via Bluetooth on Pre-Windows 10 computers. Most Windows 10 computers have native Bluetooth 4.0 support and you won't need an adapter to pair Bluetooth devices. Confirm your Win 10 computer has native Bluetooth using this article. For Mac, you can pair directly using the computer's built in Bluetooth. Learn more about Bluetooth connectivity. ANT+: You will need a ANT+ USB 2 stick in order to use TrainerRoad's automatic resistance control feature. Learn more about ANT+ connectivity. 3. Click the KICKR once more to open the Device Settings screen. From here, you can perform a spindown calibration, rename the device, select the mode, and specify PowerMatch options. 4. Perform a Spindown Calibration. Tap "Calibration" in the Device Settings screen. 5. Now you're ready to ride! Note: KICKR v5's and newer models (any model past 2018) automatically calibrate on the fly as you ride. There's no need to calibrate manually with a spindown due to this functionality. You can learn more about this self-calibrating process here. Pairing the Wahoo KICKR using the TrainerRoad Legacy app. Pairing via ANT+ 1. Open the TrainerRoad app and go to the Devices tab. Make sure your ANT+ USB stick is plugged into your computer. Note that you will need a ANT+ USB 2 stick in order to use TrainerRoad's automatic resistance control feature. Learn more about ANT+ connectivity. If you don't have an ANT+ stick plugged in, you'll see this: 2. Once your ANT+ stick is in, click "Search for ANT+ USB" and you'll see a list of devices you can pair with. Scroll toward the bottom of this list and you'll see the option to pair your KICKR. 3. Click the Pair button next the Wahoo KICKR. Make sure that your KICKR is plugged into a power outlet. In order for TrainerRoad to read the KICKR, you may need to get on the bike and begin pedaling to wake the KICKR up. 4. Your KICKR is now paired. 5. Click the Spindown button, and follow the instructions to perform a spindown calibration. This will ensure your KICKR's readings are accurate. Pairing via Bluetooth Smart (4.0) Learn more about Bluetooth Smart connectivity. 1. Open the TrainerRoad app, and go to the Devices tab. 2. Scroll to the Bluetooth Smart Device section, and find the Wahoo KICKR. 3. Click the Pair button, and wait for the KICKR to connect with TrainerRoad. 4. Click the Spindown button, and follow the instructions to perform a spindown calibration. This will ensure your KICKR's readings are accurate. KICKR FAQs How does the KICKR work with TrainerRoad during test workouts? TrainerRoad will automatically switch the KICKR from Erg mode into Level mode during the test intervals (8 or 20 minute periods) of a test workout. We do this because we don't want the app to control your KICKR and put limitations on how hard you can ride! TrainerRoad will control your KICKR throughout the warm up, ensuring that you're well prepared for the test(s), but will switch modes once the test starts. Level mode allows you to shift gears to find the optimal cadence for your test and will help you achieve the highest wattage average possible. What do I do if it is very difficult to pedal in Level mode? You'll want to be in a small gear when you start your test. If you start in your biggest gear when the KICKR switches to level it's like being in your biggest gear on a very steep hill. Make sure that you shift down before the testing period starts. Why am I still unable to pair my KICKR via ANT+ or Bluetooth 4.0? If you're still unable to pair after following these steps, it's likely that you will need to upgrade your KICKR's firmware. You will need an iOS device (iPhone or iPad) and the Wahoo utility app to do so. If you're still experiencing issues, shoot our support team a message at [email protected].

Pairing & Connection Problems

Do bridging devices work with TrainerRoad?

TrainerRoad does not officially support bridging devices. While there are some cases where you may be able to get metrics from a bridging device, it won't be as reliable as connecting the sensor directly through ANT+ or Bluetooth (click for more information on each connection method). We've had some luck with bridging devices, but most of them haven't worked as intended with our app. In some cases, we've found that only one device will be transmitted when running multiple devices through a bridging device. In others, we've found that it prevents the device from pairing to TrainerRoad entirely. This behavior tends to vary from device to device, and to be safe, we generally recommend against a bridging device. Instead, we encourage purchasing a dedicated ANT+/Bluetooth dongle. We may look into adding more compatibility with bridging devices in the future, but we don't have an ETA on this for the time being. Troubleshooting Devices with Bridging Options If you're unable to pair your sensor to TrainerRoad, and your sensor has a "bridging" option, we would recommend turning this off to make sure this isn't preventing the sensor from pairing. Otherwise, if you're still experiencing issues pairing, we would recommend checking out our troubleshooting article here. Of course, you can also reach out to our support team if you'd like some more information, too. Shoot us an email at [email protected] and we'd be more than happy to help.

Pairing & Connection Problems

Bluetooth Heart Rate Monitor

TrainerRoad is compatible with most Bluetooth Heart Rate Monitors. Before attempting to pair, make sure you've read our article on Bluetooth Smart Connectivity to confirm you have everything needed to use Bluetooth. If you are having trouble connecting an ANT+ heart-rate monitor check out this link on ANT+ Heart-Rate Monitors. Pairing a Bluetooth Smart Heart-Rate Monitor (Desktop) 1. Make sure Bluetooth is turned on 2. Go to the Devices tab in the app 3. Click on the HR monitor Screen_Shot_2021-03-23_at_10.55.52_AM.png 4. Once your HR monitor is bordered in green it is paired! Screen_Shot_2021-03-23_at_10.56.10_AM.png Pairing a Bluetooth Smart Heart-Rate Monitor (Mobile) 1. Ensure Bluetooth is turned on 2. Navigate to the Devices tab in the app 3. Tap on the heart rate monitor and wait for it to pair BLE_HR_RN1.png 4. Once the device has a green border you are connected and ready to go! BLE_HR_RN2.PNG Pairing a Bluetooth Smart Heart-Rate Monitor (Legacy) 1. Ensure Bluetooth is turned on 2. Go to the Devices tab in the app 3. Scroll down to the section for Bluetooth devices. 4. Click "Pair" TrainerRoad will look for the HR monitor 5. Wait for TR to find the HR monitor. 6. Your HR monitor is now paired! - The box will turn green and display your current heart rate once the device is paired Troubleshooting TrainerRoad not finding your heart rate monitor? 1. Make sure you're wearing your HR monitor properly. 2. Wet the strap sensors to ensure a proper connection. 3. Replace HR strap's batteries. If your having problems with your Bluetooth, check out this article on troubleshooting Bluetooth

Pairing Your Devices

Power2Max Power Meter

How To: Pair an ANT+ Power Meter https://www.youtube.com/watch?v=zrws5n1Ks_Q TrainerRoad will collect and display power data from all models of Power2Max power meters using ANT+. The NG and NGECO models are also compatible with TrainerRoad via Bluetooth. - Learn more about ANT+ connectivity. - Learn more about Bluetooth connectivity here. How to Pair Your Power2Max with TrainerRoad (Mobile) 1. Navigate to the Devices tab and make sure ANT+ is turned on. P2M_PM_1.png 2. Wake up the Power2Max by pedalling. After tapping on the Power Meter, note the green border showing it as 'paired'. P2M_PM_2.png 3. Tap on it once more to open the Device Settings screen. P2M_PM_3.png 4. Tap calibrate and you're ready to ride! P2M_PM_4.png Pairing your Power2Max (Desktop) 1. Open the TrainerRoad app and go to the Devices tab You will see this screen: P2M_PM_5.png 2. Hover over your Power Meter and click to begin pairing. Once pairing is complete, the PM will be bordered in green. P2M_PM_6.png 3. Once pairing, you can click on the PM again to open the Device Settings menu. From here you can calibrate the PM. P2M_PM_7.png You're now ready to ride! How to Pair Your Power2Max with TrainerRoad (Legacy) 1. Open the TrainerRoad application and go to the Devices tab. 2. Click the "Pair" button that corresponds with Power Meter. 3. Wait for your Power2Max to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad discovers the power meter. 4. Your Power2Max is Now Paired The pairing box will turn green once your Power2Max is paired with TrainerRoad. You'll be able to view power, cadence, speed, the Power2Max's signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. 5. Manually Zero Your Power2Max Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Power2Max before each ride.

Trainers & Power Meters

Stages Power Meter ANT+

How To: Pair Your Stages Power Meter Using ANT+ https://www.youtube.com/watch?v=zrws5n1Ks_Q TrainerRoad will collect and display power data from all models of Stages Cycling power meters using either ANT+ or Bluetooth Smart (4.0). Learn more about ANT+ connectivity. Or, learn more about Bluetooth Smart connectivity. How to Pair Your Stages with TrainerRoad (Mobile) 1. Navigate to the Devices tab and make sure ANT+ is turned on. Stages_ANT_1.png 2. Wake up the Stages by pedaling. After tapping on the Power Meter, note the green border showing it as 'paired'. Stages_ANT_2.png 3. Tap on it once more to open the Device Settings screen. Stages_ANT_3.png 4. Tap calibrate with the crank arms vertical at 12:00 and 6:00. Stages_ANT_4.png Pairing your Stages (Desktop) 1. Open the TrainerRoad app and go to the Devices tab You will see this screen: Stages_ANT_5.png 2. Hover over your Power Meter and click to begin pairing. Once pairing is complete, the PM will be bordered in green. Stages_ANT_6.png 3. Once pairing, you can click on the PM again to open the Device Settings menu. From here you can calibrate the PM. Stages_ANT_7.png You're now ready to ride! How to Pair Your Stages with TrainerRoad (Legacy) 1. Open the TrainerRoad application and go to the Devices tab. 2. Click the "Pair" button that corresponds with Power Meter. 3. Wait for your Stages to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad finds your power meter. 4. Your Stages is Now Paired The pairing box will turn green once your Stages is paired with TrainerRoad. You'll be able to view power, cadence, the Stages' signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. 5. Manually Zero Your Stages Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Stages before each ride.

Trainers & Power Meters

ANT+ Heart Rate Monitor

Most ANT+ Heart Rate Monitors are compatible with TrainerRoad. The following article walks you through best practices to pair your HRM. Before attempting to pair your device, make sure you've read through this article on ANT+ Connectivity to confirm you have everything you need for an ANT+ connection with TrainerRoad. If you need help pairing a Bluetooth heart-rate monitor, check out this article about Bluetooth heart-rate monitors. Pairing your ANT+ Heart-Rate Monitor (Desktop) 1. Plug-in your ANT+ USB Stick to your computer 2. Open the Devices tab in the TrainerRoad app 3. Make sure ANT+ is "On" in TrainerRoad's settings 4. Make sure your Heart Rate Monitor is on and is sending data. For most HRMs, this is as simple as putting the device on. 5. Once the HRM is on, you should see it show up in the "Devices" menu. Click on the heart rate monitor to begin pairing. 6. Your heart-rate monitor is paired! Screen_Shot_2021-03-23_at_10.50.12_AM.png Screen_Shot_2021-03-23_at_10.50.27_AM.png Pairing your ANT+ Heart-Rate Monitor (Mobile) 1. Make sure that ANT+ is "On" 2. If ANT+ does not show as "On", double-check your ANT+ dongle and check your built-in ANT+ receiver (if your phone supports this function) 3. Wear the HRM so it can start transmitting a signal 4. Tap the heart rate device to initiate pairing 5. Once the border turns green the device is successfully connected and you are ready to ride! ANT_HR_RN1.PNG ANT_HR_RN2.PNG Pairing your ANT+ Heart-Rate Monitor (Legacy) 1. Plug in your ANT+ USB Stick 2. Wear the HRM so it is awake and can transmit a signal 3. Select "Pair" located next to the heart-rate monitor 4. TrainerRoad will search for the heart-rate monitor 5. Wait for TrainerRoad to find the heart-rate monitor 6. Your HRM is paired once the Search box turns green and you see data Troubleshooting - Make sure you're wearing your HR monitor properly - Wet the sensors to ensure a proper connection - Replace HR strap's batteries if need be If you are having problems with your ANT signal, Check out our ANT+ USB Troubleshooting Article.

Pairing Your Devices