Skip to content
Home Search Results

37 results for “Pairing”

Found 37 results

Quarq Power Meter

How To: Pair an ANT+ Power Meter https://www.youtube.com/watch?v=zrws5n1Ks_Q TrainerRoad will collect and display power data from all models of Quarq power meters using ANT+. The Quarq DZero/DFour models can also connect to TrainerRoad via Bluetooth. - Learn more about ANT+ connectivity. - Learn more about Bluetooth Smart here. How to Pair Your Quarq with TrainerRoad (Mobile) 1. Navigate to the Devices tab and make sure ANT+/Bluetooth is turned on. Quarq_P.M._1.png 2. Wake up the Quarq by pedalling. After tapping on the Power Meter, note the green border showing it as 'paired'. Quarq_P.M._2.png 3. Tap on it once more to open the Device Settings screen. Quarq_P.M._3.png 4. Tap calibrate with the crank arms vertical at 12:00 and 6:00. Quarq_P.M._4.png How to Pair Your Quarq with TrainerRoad (Desktop) 1. Open the TrainerRoad app and go to the Devices tab You will see this screen: Quarq_5.png 2. Hover over your Power Meter and click to begin pairing. Once pairing is complete, the PM will be bordered in green. Quarq_P.M._6.png 3. Once pairing, you can click on the PM again to open the Device Settings menu. From here you can calibrate the PM. Quarq_P.M._7.png You're now ready to ride! How to Pair Your Quarq with TrainerRoad (Legacy) 1. Open the TrainerRoad application and go to the Devices tab. 2. Click the "Pair" button that corresponds with Power Meter. 3. Wait for your Quarq to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad discovers your power meter. 4. Your Quarq is Now Paired The pairing box will turn green once your Quarq is paired with TrainerRoad. You'll be able to view power, cadence, the Quarq's signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. 5. Manually Zero Your Quarq Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Quarq before each ride.

Trainers & Power Meters

SRM Power Meter

How To: Pair an ANT+ Power Meter https://www.youtube.com/watch?v=zrws5n1Ks_Q TrainerRoad will collect and display power data from all models of SRM power meters using ANT+. Learn more about ANT+ connectivity. csm_Origin_Road_Miche_abfaff3c6a.jpg SRM's New PM9 models also allow connection through both ANT+ and Bluetooth. csm_PM9-Origin-Road-LOOK-CarbonTI_5dcba23632.png How to Pair Your SRM with TrainerRoad (Mobile) 1. Navigate to the Devices tab and make sure ANT+ is turned on. SRM_1.png 2. Wake up the SRM by pedalling. After tapping on the Power Meter, note the green border showing it as 'paired'. SRM_2.png 3. Tap on it once more to open the Device Settings screen. SRM_3.png 4. Tap calibrate with the crank arms vertical at 12:00 and 6:00. SRM_4.png Pairing your SRM (Desktop) 1. Open the TrainerRoad app and go to the Devices tab You will see this screen: SRM_5.png 2. Hover over your Power Meter and click to begin pairing. Once pairing is complete, the PM will be bordered in green. SRM_6.png 3. Once pairing, you can click on the PM again to open the Device Settings menu. From here you can calibrate the PM. SRM_7.png You're now ready to ride! How to Pair Your SRM with TrainerRoad (Legacy) 1. Open the TrainerRoad application and go to the Devices tab. 2. Click the "Pair" button that corresponds with Power Meter. 3. Wait for your SRM to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad finds your power meter. 4. Your SRM is Now Paired The pairing box will turn green once your SRM is paired with TrainerRoad. You'll be able to view power, cadence, speed, the SRM's signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. 5. Manually Zero Your SRM Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your SRM before each ride. You will see "Reported" and "Current" offset. "Reported Offset" is the reading the SRM is outputting. "Current Offset" is what TrainerRoad has saved. If these numbers do not match up, perform a manual zero. Note that both offsets are the same. You're ready to ride!

Trainers & Power Meters

Wahoo Blue Speed/Cadence Sensor

The Wahoo Blue S/C sensor is a popular speed/cadence sensor combo. The latest models can be paired either via ANT+ or Bluetooth Smart (4.0), and can therefore be used with TrainerRoad for speed, cadence, and VirtualPower readings. https://www.youtube.com/watch?v=hoE9zWiZ2B0 Learn more about ANT+ connectivity, or learn more about Bluetooth Smart connectivity. How to Pair Your Speed/Cadence Sensor with TrainerRoad (Mobile) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_1.png 2. Tap on the speed/cadence sensor to begin pairing. Note: ANT+ users will see the device listed as "Speed/Cadence". Wahoo_Blue_2.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Desktop) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_3.png 2. Hover over and click on the Blue to begin pairing. Once the device is bordered in green it has successfully paired. Wahoo_Blue_4.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Legacy) 1. Open the TrainerRoad application, and go to the Devices tab. Make sure you scroll down to the list of Bluetooth Smart devices. 2. Click the "Pair" button that corresponds with Speed and Cadence Sensor under the list of Bluetooth Smart devices. You will need to pair your sensor as a speed and cadence sensor even if you are using only the speed or cadence portion of the sensor. 3. Wait for your sensor to pair with TrainerRoad. You will likely need to pedal to "wake up" your sensor. 4. Your Wahoo Blue is now paired! Learn more about using your sensor with VirtualPower. Troubleshooting Check Magnet Placement The most common problem with speed/cadence sensors is magnet placement. If you aren't getting speed or cadence readings, or getting very low or very high readings, check the magnet placement on both the crank and rear wheel. You'll want the magnet to pass right next to the sensor, but not so close that it touches. Battery Life A weak battery may not be strong enough to communicate with TrainerRoad. Try replacing the battery for a stronger signal. Pair with another head unit Try pairing your speed/cadence unit with another head unit (Garmin Edge or Wahoo ELEMNT). You'll want to see if both speed and cadence readings show up. Double check to make sure that your speed source is set to your speed sensor and not to GPS.

Pairing Your Devices

No Power Readings

Are you new to TrainerRoad and your power isn't registering? Here's a list of the most common problems and how to fix them. Virtual Power Users VirtualPower converts speed on the trainer into power. For that to happen, we need to make sure we're getting speed readings from your device. 1. Make sure you have an ANT+ or Bluetooth Smart speed or speed/cadence sensor paired under the devices tab in the desktop software. You can get our software here: www.trainerroad.com/install 2. Make sure your speed sensor is "awake" when pairing. So make sure the back wheel is spinning when you're trying to pair. 3. Make sure you have a magnet on your rear wheel to register speed. Make sure that the magnet is close enough to the speed sensor to register. This is the number one problem. Speed sensor magnets should pass close enough to the sensor to trigger a revolution, but not so close as to touch the sensor when it passes. In other words make sure there is a small gap. Another way to check speed readings is to pair your speed/cadence sensor with another head unit like a Garmin 500. If it reads on your Garmin (while indoors) but not in TrainerRoad then please contact us at [email protected]. 4. If you're having problems pairing, make sure that the battery is semi new and that you don't have any other wireless interference. Here's some info about making sure your ANT+ is setup right. 5. Under the devices tab make sure "Power Source" is set to your trainer. VP_electron.png VP_RN1.PNG no_power_readings_1.png If you still have problems, contact us at [email protected] and we'll help you out. Power Meter Users If you have a power meter paired with TrainerRoad and you are not getting power readings then there are a couple things to check. 1. Make sure VirtualPower is not enabled. 2. Check to see if another head unit like a Garmin 500 will pick up your power readings. 3. Check your power meter battery. The older the battery, the weaker the wireless data will travel from your power meter. 4. Get your ANT+ USB stick close to your power meter. This will rule out interference and half powered batteries Still have a problem? If you still have problems, contact us at [email protected] to get things sorted out.

Problems During a Workout

How to Use Broadcast Mode to Sync Heart Rate Data from Garmin Watches to TrainerRoad

TrainerRoad Athletes can sync their heart rate (HR) data from Garmin watches to the TrainerRoad app. In this guide, we will walk you through the steps to set up and use Broadcast mode on your Garmin watch, allowing you to seamlessly track your heart rate during TrainerRoad workouts. To get started, you will need the following: A compatible Garmin watch: Ensure your Garmin watch supports Broadcast mode. Refer to Garmin's documentation or product specifications to confirm compatibility, here. TrainerRoad app: Download and install the latest version of the TrainerRoad app on your smartphone, tablet, or computer. Sign in to your TrainerRoad account or Sign-up if you haven't already. Bluetooth and ANT+ connectivity: Make sure your Garmin watch and your device running TrainerRoad have Bluetooth and/or ANT+ capabilities to establish a wireless connection. NOTE: Even though many of these watches have basic Bluetooth capabilities, Broadcast mode is ONLY via ANT+ for most of the Garmin watches. For most of the Garmin watches, users cannot connect their HR data to TrainerRoad via Bluetooth. Garmin recently released a firmware update for the Garmin Forerunner 245 and 945 that now allows the watch to broadcast HR data to TrainerRoad via Bluetooth. Enabling Broadcast Mode on Your Garmin Watch 1. On your Garmin watch, navigate to the settings menu. 2. Select Settings > Sensors > Heart Rate. 3. Find the "Broadcasting" or "Broadcast Mode" option and select it. 4. Enable the Broadcast mode on your watch. You will now be able to transmit heart rate data wirelessly to other compatible devices (TrainerRoad). Pairing Your Garmin Watch with TrainerRoad 1. Launch the TrainerRoad app on your device. 2. Ensure that Bluetooth or ANT+ connectivity is turned on, on your device. 3. Navigate to the Devices page in the TrainerRoad app. 4. Look for your Garmin watch (HR) in the list of available devices and select it. 5. The box around your Garmin watch on the Devices page should be green to show it has been paired successfully. Starting Your TrainerRoad Workout 1. Choose a workout from your TR Calendar or TR Workouts page. 2. Begin the workout by tapping the "Load Workout" button. 3. Your Garmin watch will now transmit heart rate data to the TrainerRoad app. 4. The TrainerRoad app will display your heart rate data in real-time, allowing you to monitor your effort level and optimize your training. Helpful Tips: - Make sure your Garmin watch and the device running TrainerRoad are in close proximity during the pairing process for a reliable connection. - Ensure that your Garmin watch is charged sufficiently before starting a workout to avoid any interruptions. - If you encounter connection issues, try restarting your Garmin watch and the device running TrainerRoad. You can also try turning off other nearby Bluetooth or ANT+ devices that might interfere with the signal.

Pairing Your Devices

Kinetic Smart Control

The Kinetic Smart Control is a resistance control unit that connects directly to your Kinetic Rock and Roll or Road Machine trainer - turning it into a smart trainer. The unit can connect to TrainerRoad via Bluetooth Smart. TrainerRoad can automatically control the Smart Control's resistance in accordance with the workout's profile. Pairing your Smart Control to your iOS Device 1. Open the TrainerRoad app and go to the Devices screen. Make sure your phone's Bluetooth is enabled and your Smart Control is plugged in and awake. Currently, the Smart Control can only be paired to iOS via Bluetooth 4.0. Note: ANT+ support is not available for the Smart Control. Kenitic_1.png 2. Tap the Smart Control option to initiate the pairing process. Once paired, the grey square will be bordered in green. Kenitic_2.png 3. Tap the Smart Control once more to open the Device Settings screen. From here, you can perform a spindown calibration, rename the device, select the trainer mode, and specify PowerMatch options. kenitic_3.png 4. Perform a Spindown Calibration. Tap "Calibration" in the Device Settings screen. Now you're ready to ride! kenitic_4.png Pairing your Smart Control to your Desktop 1. Open the TrainerRoad app, and go to the Devices tab. Make sure your desktop's Bluetooth is enabled and your Smart Control is plugged in and awake. Currently, the Smart Control can only be paired via Bluetooth 4.0. Note: ANT+ support is not available for the Smart Control. 2. Click on the Smart Control option. Make sure that your Smart Control is plugged into a power outlet. In order for TrainerRoad to read the Smart Control, you may need to get on the bike and begin pedaling to wake the Smart Control up. 3. Click the Smart Control once more to open the Device Settings screen. From here, you can perform a spindown calibration, rename the device, select the mode, and specify PowerMatch options. 4. Click the Spindown button, and follow the instructions to perform a spindown calibration. Now you're ready to ride! This will ensure your Smart Control's readings are accurate. Pairing your Smart Control to your Android Device 1. Open the TrainerRoad app and go to the Devices screen. Make sure your phone's Bluetooth is enabled and your Smart Control is plugged in and awake. Currently, the Smart Control can only be paired via Bluetooth 4.0. ANT+ support is not available for the Smart Control. 2. Tap the Smart Control option to initiate the pairing process. Once paired, the grey square on the right will turn green. 3. Tap the Smart Control once more to open the Device Settings screen. From here, you can perform a spindown calibration, rename the device, select the mode, and specify PowerMatch options. 4. Perform a Spindown Calibration. Tap "Calibration" in the Device Settings screen. Now you're ready to ride! Troubleshooting What do I do if the Spindown Calibration fails? When performing the spindown calibration, try bringing your speed up past the target speed by a few kph/mph. If you're struggling to bring your speed up, you can shift into a bigger gear. What do I do if it is very difficult to pedal in Resistance mode? You'll want to be in a small gear when you start your test. If you start in your biggest gear, it's like being in your biggest gear on a very steep hill. Make sure that you shift down before your workout or before a testing period starts (for 8- or 20-Minute FTP Tests).

Trainers & Power Meters

Kurt Kinetic inRide Power Meter

2014-04-29_10-24-48.png Identifying Your inRide Power Meter The Kurt Kinetic inRide is a power meter that attaches to any Kurt Kinetic fluid trainer. The inRide will not work with other trainers. It's important to note that there are three generations of the inRide sensor. The generation you have will affect how it interacts with TrainerRoad. - To confirm the generation of your inRide, follow the instructions listed on this page. inRide 1 - The inRide 1 is only compatible with the TrainerRoad Legacy (AIR) App via a proprietary version of Bluetooth. - Here's a link to download the TrainerRoad Legacy app. - TrainerRoad Legacy (Mac) - TrainerRoad Legacy (Windows) inRide 2 - The inRide 2 is compatible with the regular TrainerRoad app via Bluetooth 4.0. - Learn more about Bluetooth Smart and TrainerRoad. inRide 3 - The inRide 3 is dual-band and compatible with the regular TrainerRoad app via both Bluetooth 4.0 and ANT+. - Learn more about ANT+ connectivity here. Troubleshooting inRide Doesn't Pair to TrainerRoad If you're having problems pairing the inRide, it may not be working correctly. To reset the inRide, remove the battery and put it in backward for at least three seconds. After this is done, put the battery back in the normal way, attach it to the trainer with the indentation on the sensor lined up with the magnet on the trainer roller, and try to pair it with TrainerRoad. maxresdefault.jpg Battery Life The inRide will stay paired and "awake" while TrainerRoad is running. To save battery life, close TrainerRoad after your workout or unpair the inRide. How to Pair Your inRide with TrainerRoad (Mobile) Step 1: Navigate to the Devices section of the app. Ensure Bluetooth or ANT+ displays as "On". 1.png Step 2: Tap on the inRide to initiate pairing. Once the device is bordered in green, it is paired. 2.png 4. Hit "Calibrate" to perform a Spindown Calibration. Once the calibration is complete, you're ready to ride! Note: Kinetic recommends warming the trainer up for 10 minutes before completing the calibration. 4.png How to Pair Your inRide with TrainerRoad (Desktop) Step 1: Navigate to the Devices section of the app. Ensure Bluetooth or ANT+ displays as "On". 5.png Step 2: Hover over and click on the inRide tile to begin pairing. Once the device is bordered in green, it has successfully paired. 6.png Step 3: Click the inRide one more time to open the Device Settings menu. From here you can calibrate the device. Note: Kinetic recommends warming the trainer up for 10 minutes before completing the calibration. 7.png Step 4: Once calibrated, you are ready to ride! 8.png How to Pair Your inRide with TrainerRoad (Legacy) Step 1: Open the TrainerRoad application and go to the Devices tab. Step 2: Scroll down to the list of Bluetooth devices and click the "Pair" button next to inRide. Step 3: Wait for your inRide to pair with TrainerRoad. Note: "Searching for device" will be displayed until the power meter is found. You may need to pedal in order to "wake up" the inRide. Step 4: The pairing box will turn green once your inRide is paired with TrainerRoad. Step 5: Select "Spindown" to perform a Spindown Calibration, and then you're ready to ride! Note: Kinetic recommends warming the trainer up for 10 minutes before completing calibration. Pro Flywheel 2014-04-29_10-58-31.png Check the Pro Flywheel box if you have one installed on your trainer. - Learn more about the Pro Flywheel.

Trainers & Power Meters

Stages Power Meter Bluetooth 4.0

How To: Pair Your Stages Power Meter Using Bluetooth 4.0 https://www.youtube.com/watch?v=aH-JsXd9fNk TrainerRoad will collect and display power data from all models of Stages Cycling power meters using either ANT+ or Bluetooth Smart (4.0). Learn more about ANT+ connectivity. Or, learn more about Bluetooth Smart connectivity. How Your Stages Measures Power on TrainerRoad Unlike some power meters, the Stages does not take power measurements from both the left and right legs. Power is only derived from the left side. That power is doubled and displayed as a complete reading. Keep in mind the single-leg measurement style of this power meter when considering single-leg (ILT) drills. Since power is only derived from the left pedal, riders will not get any readings during right-leg-only intervals. If you're using your Stages to measure cadence, the workout will automatically pause during right-leg-only drills if you have the auto play/pause feature turned on. How to Pair Your Stages with TrainerRoad 1. Open the TrainerRoad application and go to the Devices tab. Stages_BT_1.png 2. Click the "Pair" button that corresponds with Power Meter, and wait for your Stages to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad finds your power meter. Stages_BT_2.png 3. Your Stages is Now Paired The pairing box will turn green once your Stages is paired with TrainerRoad. You'll be able to view power, cadence, the Stages' signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. Stages_BT_3.png How to Pair Your Stages with TrainerRoad (Desktop) 1. Open the TrainerRoad application and go to the Devices tab. Stages_BT_4.png 2. Click the "Pair" button that corresponds with Power Meter, and wait for your Stages to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad finds your power meter. Once Paired, you'll see the Stages bordered in green. Stages_BT_5.png 3. Your Stages is Now Paired You'll be able to view power, cadence, the Stages' signal strength and a button to manually zero your power meter. Stages_BT_6.png 4. Manually Zero Your Stages Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Stages before each ride. Make sure the crank arm is positioned vertically at 6:00 and 12:00. Stages_BT_7.png How to Pair Your Stages with TrainerRoad (Legacy) 1. Open the TrainerRoad application and go to the Devices tab. 2. Click the "Pair" button that corresponds with Power Meter, and wait for your Stages to pair with TrainerRoad "Searching for device" will be displayed until TrainerRoad finds your power meter. 3. Your Stages is Now Paired The pairing box will turn green once your Stages is paired with TrainerRoad. You'll be able to view power, cadence, the Stages' signal strength, hours since your battery has been replaced, and a button to manually zero your power meter. 4. Manually Zero Your Stages Manually zeroing your power meter is akin to zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Stages before each ride.

Trainers & Power Meters

Garmin Vector Power-Meter Pedals

How To Pair an ANT+ Power Meter https://www.youtube.com/watch?v=zrws5n1Ks_Q The Garmin Vector Power-Meter Pedals measure a rider's power directly from the pedals. TrainerRoad will collect and display power data from the Garmin Vector using ANT+ or Bluetooth. Only Garmin Vector 3 and 3S can broadcast data via ANT+ and Bluetooth. Earlier models use ANT+ only. - Learn more about ANT+ connectivity. - Learn more about Bluetooth connectivity. image-20200728-192901__1_.png How Vectors Measure Power on TrainerRoad If using a single-sided version of the Vector power meter pedals (the "S" in Vector S stands for "single-sided"), power is only derived from the left side. That power is doubled and displayed as a complete reading. Keep in mind the single-leg measurement style of this power meter when considering single-leg (ILT) drills. Since power is only derived from the left pedal, riders will not get any readings during right-leg-only intervals. If you're using your Vectors to measure cadence, the workout will automatically pause during right-leg-only drills if you have the autoplay/pause feature turned on. If you own dual-sided Vectors (Vectors without the S nomenclature) and connect them via ANT+ or Bluetooth Smart, your power is measured on each side, added together, and sent to TrainerRoad in a single power package. How to Pair Your Garmin Vector with TrainerRoad (Mobile) Step 1: Navigate to the Devices tab and make sure ANT+ or Bluetooth is turned on. Vectors_1.png Step 2: Wake up the power meter by pedaling, and tap on the Power Meter. The power meter is paired when it's bordered in green. Vectors_2.png Step 3: Tap on the power meter again to drill into the device settings. Vectors_3.png Step 4: Tap "Calibrate". You're ready to ride after you calibrate. Vectors_4.png How to Pair Your Garmin Vector with TrainerRoad (Desktop) Step 1: Open the TrainerRoad app, go to the Devices section, and confirm ANT+ or Bluetooth displays as "On" (top, right-hand corner of the window). Vectors_5.png Step 2: Wake up the power meter by pedaling, hover over the Power Meter tile, and click to begin pairing. Pairing is complete when your power meter is bordered in green. Vectors_6.png Step 3: After it's paired, click on the power meter tile again to open the Device Settings menu. From here, select "Calibrate". You're ready to ride after you calibrate. Vectors_7.png How to Pair Your Garmin Vector with TrainerRoad (Legacy) Step 1: Open the TrainerRoad app, and go to the Devices section. If you're seeing "ANT Channel Error", make sureyour ANT+ is set up properly. Step 2: Select Pair next to Power Meter Make sure that the signal is displaying as either "Good" or "Excellent". Anything less might give you odd data when TrainerRoad is straining to pick up the signal. Step 3: Your Vector Pedals are Now Paired! The pairing box will turn green once your Vector has paired with TrainerRoad. You'll be able to view power, cadence, speed, the Vector's signal strength, and a button to manually zero your power meter. Step 4: Manually Zero Your Vector Manually zeroing your power meter is just like zeroing a scale before measuring your weight. Hit the Manual Zero button to complete this process. Although this step isn't required to start a workout, we recommend zeroing your Vector before each ride. Step 5: Make sure that Enable VirtualPower is UN-checked. If VirtualPower is enabled, TrainerRoad will ignore readings from power meters and derive power from speed readings. Make sure to un-check the box pictured below. You're now ready to ride! 2014-04-19_18-41-11.png

Trainers & Power Meters

ANT+ FE-C Trainers

Smart bike trainers are quickly growing in popularity — and for good reason. Trainer manufacturers and riders alike are catching on to the numerous benefits that smart trainers have to offer. Perhaps the coolest benefit of a smart trainer is its ability to communicate with cycling applications and control resistance automatically as you workout (ERG mode). With the arrival of smart trainers using the new ANT+ FE-C protocol, you can now use more smart trainers to their full capacity with our software. TrainerRoad should be compatible with all ANT+ FE-C trainers. If your trainer isn't detected, contact [email protected]. Pairing Your ANT+ FE-C Trainer on Mobile View your devices and make sure your ANT+ key is plugged in/enabled and that ANT+ shows as On. Tap on the ANT+ Trainer to begin pairing. Note: Your trainer will show up as 'ANT+ Trainer', rather than ANT+ FE-C. Screen_Shot_2021-03-23_at_1.46.45_PM.png 2. Once your device has paired it will be bordered in green. Tapping it again will open the Device Settings menu. Screen_Shot_2021-03-23_at_1.46.58_PM.png 3. Here you can adjust mode, resistance level, PowerMatch and calibrate. Screen_Shot_2021-03-23_at_1.47.12_PM.png 4. After completing a spindown calibration you will now be ready to ride! Screen_Shot_2021-03-23_at_1.47.26_PM.png If you receive an error message following the spindown calibration, try adjusting the tension on the tire. An error message may indicate too much or too little tension on your rear tire. Pairing your ANT+ FE-C Trainer on Desktop 1. Select the Devices tab and make sure you have an ANT+ USB 2 stick plugged in, then click on the name of the trainer that you wish to pair with. Note: Your trainer will show up as 'ANT+ Trainer', rather than ANT+ FE-C. Screen_Shot_2021-03-23_at_1.47.44_PM.png 2. Your trainer is now paired. Hover your cursor over the device to get it to appear green, as shown below. Click on the trainer's tile to open the settings. Screen_Shot_2021-03-23_at_1.47.58_PM.png 3. Click the white “Calibrate” button to begin your spin down calibration. Screen_Shot_2021-03-23_at_1.48.09_PM.png 4. Follow the directions on your screen to accelerate your bike to the proper speed and maintain that speed for as long as the screen instructs you to. Screen_Shot_2021-03-23_at_1.48.20_PM.png 5. Let your bike spin down freely. Do not use the brakes. Screen_Shot_2021-03-23_at_1.48.32_PM.png 6. When the spindown is complete click “Finish” to accept the calibration value. Now you’re ready to start your workout! Screen_Shot_2021-03-23_at_1.48.51_PM.png Pairing your ANT+ FE-C Trainer to Legacy AIR Apps 1. Select the Devices tab and make sure you have an ANT+ USB 2 stick plugged in, then select "Pair". 2015-05-22_09-01-56.png 2. Your trainer is now paired. (Be sure that the "Enable VirtualPower" is not checked.) 2015-05-22_09-32-25.png 3. Calibrate your device by clicking the "Spindown" button and follow the on-screen instructions. 2015-05-22_09-32-38.png If you receive an error message following the spindown calibration, try adjusting the tension on the tire. An error message may indicate too much or too little tension on your rear tire. 4. Once complete, you're ready to start riding! 2015-05-22_09-34-28.png 2015-05-22_09-34-50.png Updating Your Trainer's Firmware If you're experiencing issues pairing your Tacx ANT+ FE-C trainer, you may need to update your Tacx trainer's firmware with the Tacx Utility App (available in the iOS App Store). To get started, enable Bluetooth on your device. When you open the utility app, you should see your trainer appear on screen — select your trainer. The app will determine which version of firmware you're currently running on your trainer, then give you the option to update your trainer to the latest version. To do so, tap "Upload firmware..." and wait for the firmware to upload and install. Once your firmware has been updated, a completion message will appear. Follow the directions to unplug your trainer and complete the update process. Your firmware should be updated and your Tacx smart trainer ready to pair. You can verify that your firmware update is complete by selecting your trainer from the main screen. If updated correctly, you'll now see the newest version of firmware for your trainer.

Trainers & Power Meters