Skip to content
Home Search Results

59 results for “AI FTP”

Found 59 results

Not Enough Time!

So you've figured out when your goal events will be, and you discover that you don't have the 28 weeks required to complete the entire Base, Build, Specialty training plan progression. Not a problem — there are still big gains to be had. Build your custom training plan using the Plan Builder. How does Plan Builder Adjust your Training Plan? Plan Builder adjusts your training plan depending on your experience level. We break it down between Beginner, Intermediate, Advanced, and Expert. Beginner/Intermediate Beginner/Intermediate athletes benefit most from earlier components of the Base, Build, Specialty training progression. We truncate from the Specialty Phase down towards the Base Phase such that the Base Phase of training is last to be cut. Advanced Advanced athletes benefit most from Build Phase training, so we truncate from Base and Specialty Phases of training (e.g. we cut from the bookends of the Base and Specialty Phases). Expert Expert athletes benefit most from the later points in the Base, Build, Specialty training progression. We truncate from the Base Phase of training down towards the Specialty Phase such that the Specialty Phase of training is last to be cut. Breakdown You may be wondering why we trim time from the Base Phase of training for Advanced and Expert athletes. Advanced and Expert athletes are extremely familiar with their current fitness level and the rigors of high-intensity interval training. Because we assume these athletes have a high level of fitness coming into their training plan, we trim time from the Base Phase of training when they are faced with a short timeframe until their main event.

Making Your Plan Work

Elite Drivo II

The Elite Drivo II is a smart trainer that connects to TrainerRoad through ANT+ FEC or Bluetooth FTMS. TrainerRoad can automatically control the Drivo II’s resistance in accordance with the workout's profile. drivo_II.jpg How do I Set Up the Elite Drivo II with TrainerRoad? Take a look at this article for instructions on how to pair via ANT+ FEC. How Does the Elite Drivo II Work with TrainerRoad? The Elite Drivo II has a selection of two modes that can be used with TrainerRoad. Riders can toggle between ERG and Resistance mode in the desktop app by using the dropdown tool located on the bottom bar of the workout screen. While using the mobile app, the mode can be changed by going to the Devices tab and tapping on the connected trainer’s name. ERG Mode ERG is the most commonly-used mode when doing a TrainerRoad workout with a Drivo II. While in ERG mode, TR will automatically adjust the resistance on the trainer in accordance with the workout's profile in ERG mode. The rider can keep a steady cadence and leave their bike in a single gear for the duration of the workout while the Drivo II makes any necessary adjustments. ERG mode makes for very smooth watts and a great workout! Resistance Mode While in Resistance mode, the Elite Drivo II delivers a similar experience to that of an adjustable magnetic trainer with a linear power curve. This mode includes a variable resistance setting that can be electronically adjusted. Resistance mode is intended to allow the user to emulate the slope, or pitch that a rider would encounter on any given road. Resistance mode is also the default mode for certain testing intervals. How does the Elite Drivo II work with TrainerRoad during a test workout? The Ramp Test can be completed entirely in either ERG mode or Resistance mode. It is completely up to the individual rider, but most people prefer ERG mode so they can stick to focusing on pedaling! For 8- and 20- minute FTP Tests, TrainerRoad will automatically switch the Drivo II from ERG into Resistance mode during the test intervals (8 or 20 minute periods) of a test workout. TrainerRoad will control your Drivo II throughout the warm up, ensuring that you're well prepared for the test(s), but will switch modes once the test starts. Resistance mode allows you to shift gears to find the optimal cadence for your test and will help you achieve the highest wattage average possible.

Trainers & Power Meters

Pushing an Outside Workout to the Apple Watch

- Authorize Apple to Pull From TrainerRoad - Syncing A Completed Cycling Workout Back to TrainerRoad - Scheduling a Workout - Starting a Workout - Mirroring Apple Watch to Phone - FAQs You can now have scheduled TrainerRoad Outside Workouts pushed to your Apple Watch! Like our Outside Workouts for Garmin and Wahoo head units, this new feature will allow you to complete your scheduled TrainerRoad Outside Workout, using your Apple Watch device. Once pushed to your Apple Watch, your workout will guide you through the intervals of your session, showing you the specific power targets and interval times that TrainerRoad AI has prescribed. All you have to do is pedal! Authorize Apple to Pull From TrainerRoad To enable TrainerRoad Outside Workouts for your Apple Watch device, you will need to connect your TrainerRoad account to both your Apple Watch and Apple Health app. This can be done most easily from the start-up screen of your TrainerRoad app. After updating to iOS 17 and to the latest TrainerRoad app version, you'll receive a notification to get set up. RPReplay_Final1695318445.gif Just hit Set Up to get the process started. IMG_4911.png Note: If you did not receive this notification, head to your Account section on the iOS app, scroll down, and select "Connect to Apple Watch." From here, you will want to select Tap to Set Up listed under both "Push to Apple Watch" and "Sync with Health". IMG_4914.png Click the following link if you are encountering issues: Apple Health Troubleshooting Syncing A Completed Cycling Workout Back to TrainerRoad As long as you have Apple Health connected to your TrainerRoad account, your completed Outside TrainerRoad workout will sync back into your Career automatically. At this time, though, unstructured outside rides will not push from Apple Health back into TrainerRoad. For more details on linking your TrainerRoad and Apple Health accounts, check out the following article: Connecting TrainerRoad with Apple Health Scheduling a Workout You can schedule an Outside Workout to be completed on your Apple Watch using any TrainerRoad platform. This includes our desktop apps (Mac and Windows), our mobile iOS and Android apps, and through our website. It should be noted though, that an Apple Watch icon will only display for pushed TR Outside Workouts in TrainerRoad's iOS apps. TrainerRoad Outside Workouts that are part of your plan or scheduled within 7 days will automatically be pushed to your Apple Watch. - You will just want to be sure to open your iOS app on the day of your workout. You can also push a TrainNow workout or a session from TrainerRoad's workout library manually using the process below: 1. Select the workout that you would like to complete, either from TrainNow or a specific workout from our workout library. 2. Next, make sure that the session is marked as an Outside Workout. Inside Workouts cannot be pushed to Apple Watch devices 3. Once the workout has been added to your Calendar, it will automatically push to your Apple Watch, just like a planned workout. - TrainerRoad Outside Workouts that you don't have planned can also be pushed to the Apple Watch "moment of" via the Push to Apple Watch button. IMG_4917.png Workouts that have been successfully pushed to your Apple Watch will display a small watch icon in iOS TR apps, indicating a successful sync. IMG_4916.png In order to have your workout actually push from TrainerRoad to your Apple Watch, you will need to open your TrainerRoad app on an iOS device, either your iPhone or iPad. - Workouts will not sync in the background as they do for Wahoo and Garmin head units. Starting a Workout To start a TrainerRoad Outside Workout on your Apple Watch you will first want to connect your training devices (power meter, heart rate monitor, etc) via Bluetooth. - This needs to be done within the Settings App of your Apple Watch. Just click on Bluetooth and connect any of the devices that you wish to train with during your workout. Screenshot 2023-09-14 at 7.59.10 PM.png Once you have connected your training devices, go ahead and open the Fitness App on your Apple Watch Screenshot 2023-09-14 at 7.59.59 PM.png Then click on your scheduled TrainerRoad Outside Workout You will then be presented with the workout details for your upcoming session. Once you are ready to start pedaling, go ahead and click Start Workout Screenshot 2023-09-14 at 8.00.40 PM.png Your Apple Watch will then display the target metrics for each portion of your workout, guiding you through your session just like your Indoor TrainerRoad Workouts. Screenshot 2023-09-14 at 8.00.55 PM.png Mirroring Apple Watch to Phone We understand that completing an Outside Workout using your Apple Watch might be challenging. Our suggestion, for both safety and efficiency, is to mirror your Apple Watch screen to a separate iOS device, which can be mounted on your handlebars for easy viewing. Here are the steps to do so: 1. On your paired iPhone, go ahead and navigate to your Settings, then Accessibility. 2. Next, tap Apple Watch Mirroring. 3. Toggle Apple Watch Mirroring "On". 4. Wait for your iOS device to connect. 5. Once connected, you will be able to see all of your workout data on your larger iOS screen, and you can now control your Apple Watch from your iPhone. Screenshot 2023-09-14 at 8.01.14 PM.png - When mirroring from your Apple Watch to a separate iOS device, you may experience a slight lag in timing. Rest assured, all of your data is still being recorded as normal through the Apple Watch itself. FAQs What Types of Workouts will Sync to my Apple Watch? Only scheduled Outside TrainerRoad Workouts can sync to your Apple Watch device. Custom workouts pushed from TrainingPeaks, or made in Workout Creator as well as Indoor TrainerRoad Workouts will not. Can you Customize Data Fields? Yes, you can customize the data fields that are shown during your workout. This, however, can only be done from your Apple Watch. Changes cannot be made through your iOS device (iPhone or iPad). This can be done within your Apple Watch Workout app: Personalize your Apple Watch Workout Views How many days in advance will my Workouts Sync? As long as your workouts are marked as Outside Workouts in your TrainerRoad Calender, any workout scheduled within 7 days of the current day will be pushed to your Apple Watch for completion. What Do I Do If My Workouts Aren’t Syncing? If your TrainerRoad Outside Workouts are not showing up on your Apple Watch device, the first thing to check is that you have your TrainerRoad account connected to Apple Health, and have granted all of the following Apple Health permissions. IMG_9421601DFE88-1.jpeg Which Models of Apple Watch and iPhone Are Required? This feature is compatible with the Apple Watch Series 4 or newer as well as iPhone 11 or newer.

Outdoor Workouts

FTP Testing - The Cornerstone of Training

Few components of power-based training are as important as measuring and tracking FTP. In fact, it could be argued that nothing short of actual performance ranks as highly in terms of overall importance. With this in mind, we offer the following primer on what your FTP represents, what an FTP test is, how and why we assess FTP, and when we assess it. What is FTP? Functional Threshold Power (FTP) is — quite simply — a measure of fitness. FTP represents the power (measured in watts) that you could theoretically maintain for about an hour, and it's the single metric we use to scale each of your workouts in our shared quest to keep your fitness growing. With regards to what's taking place within your body and the muscles themselves, riding at your FTP pushes you right up to that limit where pushing any harder will drastically limit the duration of your ride. But as long as you stay just below that acidic tipping point where your muscles light up and uncomfortably tolerable minutes become barely tolerable seconds, your muscles are in balance with the workload - for about an hour, anyway. What is the FTP Assessment? An FTP assessment is a snapshot of your fitness at any point in time. By measuring your fitness and assigning it a number, we can track changes in your fitness over weeks, months, and years. The assessment we use to measure this level of fitness is our Ramp Test. How is FTP Calculated from the Ramp Test? TrainerRoad will automatically calculate your FTP upon completion of your Ramp Test workout. If ridden correctly, you can expect your FTP to be about 75% of your highest 1-minute power sustained during the test. Note: More complicated calculations may be applied when determining FTP from a Ramp Test depending on how accurately a rider followed the format of the test. This means, 75% of a rider's 1-minute power may not translate to their actual FTP calculation. https://www.youtube.com/watch?v=wWHgMzpvH7c How is Functional Threshold Power Assessed? During a Ramp Test assessment, riders first follow a sufficient, stepwise warming period before progressing to their higher-intensity steps. The power that you average over the last, highest minute of your test allows us to mathematically estimate your current FTP. The goal here is to obtain a reasonably close estimate of one's sustainable power, or in power-based training nomenclature, your Functional Threshold Power/FTP. Why Do We Assess FTP? By assessing FTP, not only can we track changes in fitness, but we can also establish training zones, i.e. power levels. And as your fitness changes, we can update these power levels accordingly. Each type of interval, e.g. Tempo, Sweet Spot, VO2max, etc. represents a percentage of your FTP. For example, Tempo intervals fall in the 76-90% FTP range while VO2max intervals fall in the 106-120% FTP range. Different types of intervals target different energy systems and consequently different training adaptations, so it's important to have a personal measure of your fitness that will allow us to tailor your workouts to your specific needs and capabilities. When Should I Assess My FTP? It's a good idea to assess your FTP prior to beginning each training season unless you already have a good sense of your current fitness and your sustainable power. But even if you think you have a good grasp on your current fitness, it's still a good idea to back up your perception with actual performance. It's also recommended that you assess or reassess FTP before embarking on a new training plan. Finally, you should reassess your FTP about every 4-6 weeks in order to account for changes in your fitness and to keep your power levels in line with your performance potential. What if I'm Feeling Stronger Before My Scheduled FTP Test? Of course, testing roughly every 4-6 weeks is just a general guideline. Your FTP very well may have increased prior to 4-6 weeks after your last test. If you find yourself breathing easily through workouts with high-Intensity Factors (IFs)® or that you're often manually increasing the workout intensity before it's time for your next test, don't hesitate to manually edit your FTP. No need to wait for an FTP test if you know you're stronger. :)

FTP & Fitness Testing

How to Test with the 20-Minute & 8-Minute FTP Tests

With the Ramp Test as our recommended assessment, we still offer two alternative options to test FTP: The 20-Minute and 8-Minute FTP Tests. How to Test During the test intervals, totally ignore the graph's recommendations. Whether you're above, below, or exactly in line with the graph makes no difference. It's important that these assessment efforts are not restricted or guided in any way. We're simply trying to get a reasonably close estimate of your Functional Threshold Power, something we can't do if your smart trainer is limiting your power. FTP (Functional Threshold Power) is automatically calculated upon completion of any of our test workouts. 20-Min VS. 8-Min Test If you do decide to use one of these alternative tests, whether you use our 20-minute Maximal Lactate Steady State (MLSS) interval or a set of 8-minute Power at VO2max (pVO2max) efforts, it's best to choose a format that you will stick with and one that fairly represents your fitness at the time. Each test has its own pros & cons. We'll elaborate on each of them briefly below in order to help you choose a format that best suits you, both in terms of your current capabilities & capacity for suffering. 20-Minute Test https://www.youtube.com/watch?v=nfdNQMik6Mk The 20-Minute Test is an ideal format to break into shorter, more manageable segments. By breaking the 20-minute effort into four 5-minute segments, riders can subtly tweak their effort every so often based on longer periods of muscular feedback, i.e. a rider can slightly reduce their pace every 5 minutes based on perceived exertion or how their body feels. The 20-minute test is a relatively long testing effort and pacing can sometimes be an issue for less experienced riders. Because of this, the 20-Minute Test is usually more ideal for seasoned riders who have a good sense of how to pace well. Additionally, many riders play it safe during the longer formats and end up finishing with too much gas left in the tank. Evidence of this is illustrated via a 2 or 3-minute surge in power at the end of an effort that would ideally be evenly-paced over the entire 20 minutes. As a result, their FTP and relative power levels are likely to be underestimated a bit (or a lot) rendering all subsequent FTP-based workouts less productive than they would be otherwise. TrainerRoad calculates your FTP from the 20-Minute Test by multiplying your average power for the test interval by .95. In other words, your FTP is 5% less than your average power of the test interval. 8-Minute Test https://www.youtube.com/watch?v=XmJr4r1pWYM Our preferred format for less experienced riders is the 8-minute protocol comprised of two 8-minute efforts. The 8-Minute Test yields a greater amount of information by demonstrating power at VO2max via each 8-minute interval, sustainable power/FTP once the average power of the two 8-minute intervals is reduced by 10%, and you can even track improvements in your aerobic fitness when comparing the 2 efforts afterward, i.e. a substantial difference could indicate a limited ability to recover & insufficient aerobic capabilities. TrainerRoad calculates your FTP from the 8-Minute Test by multiplying your average power of the two test intervals by .9. In other words, your FTP is 10% less than your average power of the two test intervals. Erg Mode vs Slope/Resistance Mode Building on the information found in our Erg Mode Explained article, these FTP test alternatives, when completed on a smart trainer, have to be done in the appropriate mode: Slope or Resistance mode (depending on your particular trainer). Fortunately, TrainerRoad switches modes for you when you assess your FTP via our 20-Minute Test or our 8-Minute Test. Why Erg Mode is Bad for the 8- and 20-Minute FTP Tests If a smart trainer is left in Erg mode during the testing portion(s) of a 20- and 8-Minute test, the workout will lock you in at your current fitness level instead of allowing you to pace the duration of the test interval at your own power target. To avoid this, the assessment needs to take place in Slope/Resistance mode in order to allow a rider to work at his/her own pace rather than having the trainer determine a pace based on the input FTP. TrainerRoad automatically switches you to Slope/Resistance mode during your test interval(s). If you wish to use a higher or lower Slope/Resistance setting, you're free to adjust it yourself and it makes no difference if you use different Slope/Resistance settings from interval to interval or test to test. The last setting you used will be applied the next time you enter Slope/Resistance mode. By switching to Slope/Resistance mode, you're allowed to go hard without being forced to maintain the calculated Target Power that would be forced on your legs in Erg mode. You can pace according to your current capabilities such that you ride as strongly as possible for the assessment interval(s).

FTP & Fitness Testing

The Basics of Base Training

Principles: The purpose of base training is to establish a foundation of fitness that will allow cyclists to build towards their physiological potential for a goal event. It may seem counterintuitive to revert to base training every year after reaching new heights of performance, but this strategy pays dividends come race season. Much like a pyramid, our fitness is built in a hierarchical fashion, with the initial work serving as a critical foundation that will eventually support a higher peak. This foundation is achieved through effective base training in which cyclists raise their fitness levels. During this phase there are various transformations happening on different levels, but for the sake of simplicity, we’ll just focus on the efficiency of muscles to transform energy into speed on the bike. As you focus your training on developing your aerobic capacity, amongst other useful adaptations, you train your body to become more efficient at turning fat into energy and producing energy aerobically regardless of its fuel. This transformation takes place within the mitochondria (the powerhouses of the cell ) in your muscles. So, as you spend more time stressing your aerobic energy system, your body adapts by creating more efficient mitochondria. This adaptation will benefit you throughout all portions of your power curve because mitochondria are involved in turning energy into speed at all different intensities. Takeaway: By following a Base training plan, you will establish fundamental aspects of your fitness capabilities. The primary focus is on aerobic endurance, muscular endurance, and form/speed/power capabilities. TrainerRoad Base Plans: General, Traditional, Polarized, and Masters So it's time for base, but you aren't sure what will work best for you... what do you do? You can use the guide below to decide which Base plan is right for you. General Base This take on Base training integrates a bit more variety than the Traditional approach. You will see a lot of Sweet Spot work, but the plan also contains VO2 max intervals and neuromuscular bursts in the Low and Mid-Volume Plans. The reasoning behind this is that most amateur athletes when training at a low-intensity will run out of time in their schedules before they really tax their endurance muscles to the limit. Through Sweet Spot work, and a mix of higher intensity work, you can attain sufficient training stress to initiate adaptation in your limited training time. - When choosing a Base plan, we've found General Base (GB) is the best choice for most athletes who don't have enough time (less than 10 hours/week) to complete a full Traditional Base. If that's you, we recommend trying one of our General Base plans to fit your schedule. - This plan initiates general fitness gains much faster (can expect FTP increase in 6-8 weeks) Learn more in our blog post: What is General Base Training? Traditional Base The Traditional Base approach requires long, low-intensity hours in the saddle. There are a few key demographics that this approach is best for: - Those recovering from injury will benefit from the gentle approach of Traditional Base - Athletes who have large amounts of time before their target events. By planning their season well in advance of their race days, riders afford themselves the option of cultivating a wider base of fitness. Completing Traditional Base prior to a General Base circuit is one way to build this huge, substantial base. Polarized Base Polarized Training spits your training into two intensities at specific volumes: ≈80% low intensity, 20% high intensity or 95/5%. This structure takes more time in the saddle to generate comparable adaptations to General Base, but less than Traditional Base. Polarized training is best for: - Experienced athletes with a strong aerobic base who can handle intense sessions. - Athletes who have the time and want to train with long endurance sessions and hard high-intensity efforts. Masters Base Masters Base plans are designed to prioritize recovery with no more than two days of Sweet Spot, or higher-intensity workouts each week. These plans work well for: - These plans are made for athlete's who need more recovery time. - Any athlete who needs more recovery time will find these plans extremely beneficial, not just masters athletes. - They can be used for athletes returning to interval training after extended time off, injury, or illness. Learn more about Masters Plans from this article: What are Masters Plans? Takeaway: For most applications, General or Masters Base is the way to go. Relevant Podcasts [13:45] Podcast 068: Sweet Spot vs Traditional Base discussion Can I Skip Base Training? Typically, we do not recommend athletes skip any training phases. You will get the fastest if you work through all three training phases in order and to completion before moving onto your next phase of training. However, every rider has different time constraints, as well as different levels of fitness and cycling backgrounds going into their structured training. Here are a few common reasons that athletes want to skip Base: - Riders with heavily experienced backgrounds who are familiar with the level of base training they have at that point in the season. These riders can decide to bypass or reduce the duration of the Base phase, and move straight into a Build phase if they have been doing structured Base outside of TrainerRoad. - Riders with mid-level or minimal experience, whose target event is less than 28 weeks away (the time it takes to complete Base/Build/Specialty). We’d suggest s/he complete the entire Base phase of training and move as far along through the Build and Specialty training plans as time will allow. See our article "Not Enough Time!" To further explore how you should structure your season with less than 28 weeks. - Riders who are mid-season and have already peaked for en event, but have 16 or fewer weeks until their next event. These athletes should first consider a low-intensity training block but can absolutely skip base and jump back into Build. This is what we call a 'rebuild' and you can learn more about how to structure around this in our "Peaking for Multiple 'A' Races" article. Takeaway: No, you should probably not skip Base Phase, however there are a few fringe cases where it is an acceptable decision. Base Training Q&A Q: Time constraints aside, how many hours per week would I need to spend base training in order to improve upon last season's fitness? A: The goal is to increase your annual training volume by 5% but not more than 15% over last year’s training volume in order to improve upon last year’s performance without overdoing it. Q: Do I really have to go this easy during Base I? It doesn't seem like I'm working hard enough to gain any training benefit. A: Properly performed, Aerobic Endurance rides (roughly 60-80% FTP) train your type IIb fibers - which are the most versatile muscle fiber type - to prefer fat over sugar, one of the key objectives of Base Training. This adaptation is negatively affected if you work too hard, so go slow so your body learns to metabolize fat and spare sugar at low, but eventually greater, effort levels. Q: Sometimes I don't have the time for the prescribed ride duration. How can I address these time constraints without missing out on the benefits of base training? A: Although athletes competing in events requiring long hours on the bike need to adapt to long rides with no breaks, riding twice daily is often the only way to log high daily base mileage and is also an excellent way to reduce body fat during Base Training. Simply break your longer rides into 2 segments and perform them at the beginning, middle and/or end of your day. Try to refrain from breaking your long weekend ride into halves, and avoid breaking rides less than 90 minutes into smaller parts whenever possible. Q: Are recovery weeks really necessary when the training intensity is already so low? A: Yes. Regardless of the low intensity, the body needs time to absorb new stress before additional stress is applied, even if that stress isn't due to high-intensity intervals or race efforts. Recovery weeks will simply drop the stress to roughly half the stress of your current phase's toughest week but keep you on the bike the same number of times in order to avoid any disruption of your training schedule. Also, there’s no reason (nor benefit) to exceed 50% FTP during Recovery Weeks unless you are certain that riding over 50% FTP is still regenerative and restful and allows your body to recover and prep for the next, more stressful, block of training. Q: Which drills should I be doing per session and how many do I do for the duration? A: The drills are briefly during the workouts themselves. As long as you haven't checked the "Hide text during workout" box on the Profile tab, and the onscreen directions will prompt you to add particular drills at particular times.

Training Plans Explained

RPE Key Explained

Rate of Perceived Exertion (RPE) refers to a 1-10 scale to self-report the intensity of an effort. Our RPE scale is based largely on Matt Fitzgerald's running and swimming RPE scale. We use it because it falls in line with what we consider correct exertion levels for what we're trying to achieve with the workouts. How to Use the RPE Scale The RPE Scales are broken into three separate columns: Column 1 - Rate of Perceived Exertion (RPE) from 1-10 Column 1 lists the Rate of Perceived Exertion (RPE) on a 1-10 rating. Lower RPE ratings are hardly distinguishable (RPE 1-2, RPE 3-4, RPE 5-6), which is why the lower RPE ratings are collapsed into a single row. Column 2 - Effort Level Column 2 lists effort levels relative to each RPE rating (e.g. a Moderate effort should feel like a 7/10 according to your rate of perceived exertion level). Column 3 - Zone/Pacing Equivalent Column 3 lists TrainerRoad's cycling power zones, and the workout types for swims and runs that you would perform in these zones. These give cyclists and triathletes a way to more easily understand how their RPE levels compare to the effort levels of their cycling power zones. For example, riders understand what the "Endurance" power zone feels like on the bike. Using the RPE chart and knowing that "Easy-Moderate" should feel about the same RPE that "Endurance" work feels like on the bike, athletes have a better idea of how their Easy-Moderate pace should feel during running and swimming workouts. Cycling RPE scale | | | | | --- | --- | --- | | RPE 2 | Recovery | Active Recovery | | RPE 3 | Very Easy | Warm-up/Cooldown | | RPE 4 | Easy | Endurance | | RPE 5 | Comfortable | Endurance | | RPE 6 | Comfortably Hard | Tempo | | RPE 7 | Hard | Tempo/Sweet Spot | | RPE 8 | Very Hard | Threshold | | RPE 9 | Very very hard | TR VO2max | | RPE 10 | Maximal Effort | Anaerobic Capacity | Example of Outside Cycling Workout Using RPE The outside-workout equivalent of "Darwin" includes the following description: "Warm Up: - Ride for 6 minutes gradually raising your effort from RPE 4 to 7. - 4 minutes easy. Main Set: - 4x10 minutes at RPE 8 with 3 minutes easy between intervals. Cool Down: - 1 minute easy." This workout begins with a warm-up period between RPE 4-7. This effort should range from an "Easy" pace to your "Sustained Power" abilities. Relating this to Power Zones within TrainerRoad, your effort should range between 55% FTP (just above Active Recovery) to 88%-94% FTP (Sweet Spot). Your main set has you settling in at a "Threshold" pace. Relating this RPE level to Power Zones within TrainerRoad, your effort should range between 95%-105% FTP. Your cool-down period finishes your workout with an RPE 4 pace, which relates to around 55% FTP. Running RPE Scale | | | | | --- | --- | --- | | RPE 2 | Very very easy | Recovery | | RPE 3 | Very Easy | Endurance | | RPE 4 | Easy | Endurance | | RPE 5 | Comfortable | Marathon | | RPE 6 | Comfortably Hard | Half Marathon | | RPE 7 | Hard | 10k | | RPE 8 | Very Hard | 5k | | RPE 9 | Very very hard | Mile | | RPE 10 | Maximal Effort | Sprints | Examples of Run Workouts Using RPE in TrainerRoad: A running workout titled, "Run VO2max Intervals", includes the following workout description: "Run 12min working up to Easy-Moderate, RPE 6 pace to warm up, then this week repeat 18 Hard, RPE 9, 30-second high-speed surges, recovering for only 30 seconds after each; run 10min Easy, RPE 4 to cool down for a total of 40 minutes of running" This workout begins with an RPE 6 pace, transitions into several RPE 9 efforts, and finishes with what should feel like an RPE 4 cool-down period. Referring to the second column in the RPE chart, this translates to beginning the workout at an "Easy-Moderate" pace, transitioning into 18 "Hard" efforts, and cools down with an "Easy" 10 minutes of running. Swimming RPE Scale | | | | | --- | --- | --- | | RPE 2 | Very very easy | Recovery | | RPE 3 | Very Easy | Endurance | | RPE 4 | Easy | Easy Swim or Warm-up | | RPE 5 | Comfortable | Easy-Moderate Swim | | RPE 6 | Comfortably Hard | Moderate Swim | | RPE 7 | Hard | Moderate-Hard Swim | | RPE 8 | Very Hard | Hard Swim | | RPE 9 | Very very hard | Fastest Average | | RPE 10 | Maximal Effort | All Out Sprints | Examples of Swim Workouts using RPE in TrainerRoad: A swimming workout titled, "Continuous Base Swim (2400m)", includes the following workout description: "Warm-Up 300m Easy, RPE 4 1800m Easy-Moderate, RPE 6 Cool-Down 300m easy, RPE 4" This workout warms up with an RPE 4 effort, transitions into an RPE 6 effort, and cools down with an RPE 4 effort. Referring to the RPE chart, the workout begins with an "Easy" pace, moves into an "Easy-Moderate" pace, and concludes with an "Easy" cool-down period.

Making Your Plan Work

Common Training Acronyms Defined

TSS, NP, IF, and FTP are terms created by Dr. Andy Coggan and are specific to cycling. Functional Threshold Power - FTP Functional Threshold Power, or FTP, is the maximum average power you can hold for one hour. So if you can hold 300 watts for one hour, that means your FTP is 300. FTP is the best single marker for fitness in cycling. The higher your FTP is, the stronger you are. In TrainerRoad, we use your FTP to scale workouts. Our workouts are structured as a percent of FTP. This means that when your FTP increases, the workouts get harder to maintain the same difficulty. Doing an all-out one-hour effort is really, really hard. It's hard to get an accurate test without it being in a race (much less indoors on a trainer). Because of this, we use the Ramp Test for FTP testing. The Ramp Test is both accurate and easy to complete for both new and experienced cyclists alike. If you would like to read up more on the Ramp Test and why we prefer it, click here. The other two most common tests to help estimate FTP are the 20 Minute Test and the 8 Minute Test. These are considered standard for FTP testing in the cycling world. We take averages of the all-out work intervals in each test and multiply them by a factor, usually .95 or .90. This gives us a good estimate of FTP. Normalized Power - NP® Normalized Power gives you an average power number if you would have ridden at a constant power output. For example, in a crit, you would have lots of power spikes and lots of coasting. This would result in a low average power. Normalized power was developed to try to figure out how much stress was actually put on your body. By using some math and weighting the really hard stuff more than the easy stuff we can figure out what your power output would have been if you would have ridden steadily the entire time. For TrainerRoad, this number is really helpful because most of our workouts have intervals with rest periods in between. Normalized Power gives you a way to compare efforts between workouts. For example, if one workout has a NP of 223 and another workout has an NP of 243 you put out more power for the second workout. Intensity Factor - IF® This is how intense a ride is. A ride with an Intensity Factor of 1.0 would equal an all-out effort for an hour. If you did an hour at .8 IF that means it was about an 80% effort. TrainerRoad has the Intensity Factor of each workout specified. This helps you gauge the difficulty of each workout. Training Stress Score - TSS® TSS is the amount of training stress generated from a workout. The higher this number, the more potential fitness you may have earned from a given ride. To gain the most fitness, you want to earn the most TSS possible. All of the workouts on TrainerRoad have a TSS score on them. This means that if you were to ride the workout exactly like it is prescribed you would earn that amount of TSS. How do TSS and IF relate to each other? Some rides can be intense, some can add a lot of fitness, some do both. A workout that is just 30 minutes long can be really intense and have an IF score of over 1.0, but that doesn't mean you'll earn a lot of TSS from it. By contrast, you can have a 2-hour ride that's not very intense, but will earn you a lot of TSS. Didn't find what you're looking for? You can find more acronyms for workout drills here.

Getting Started

Trainers With Multiple Settings

How do I set up VirtualPower if my trainer has more than one setting? Magnetic and fluid trainers have variable resistance settings, and each of these settings have their own power curve (speed-to-power ratio). For more information on how these readings are derived, learn how VirtualPower works. This graph displays each power curve for every resistance level on a single trainer. The X-axis represents speed while the Y-axis represents power measured in watts. Since each resistance setting on your trainer has its own power curve, you'll need to choose which level you're training with. How to Select a Resistance Setting Desktop Step 1: Pair your speed/cadence sensor in the Device section of the app Step 2: Select Turn On next to VirtualPower, then select the Enable VirtualPower toggle Step 3: Select the make and model for your trainer Step 4: Choose a Resistance setting (if any) from the drop-down menu Note: Make sure the resistance setting you have on your trainer matches the selection within TrainerRoad's VirtualPower settings. If you change the setting, you'll need to change the selection in TrainerRoad. Screen_Shot_2021-03-23_at_11.03.35_AM.png Mobile Step 1: Pair your speed/cadence sensor in the Device section of the app Step 2: Select Turn On next to VirtualPower, then select the Enable VirtualPower toggle Step 3: Select the make and model for your trainer Step 4: Choose a Resistance setting (if any) from the drop-down menu Note: Make sure the resistance setting you have on your trainer matches the selection within TrainerRoad's VirtualPower settings. If you change the setting, you'll need to change the selection in TrainerRoad. VP_RN4.PNG Before Settling on a Setting It's recommended that you do a couple of short test rides to familiarize yourself with the settings and which seems to work best for you if you're not familiar with your trainer and your favored resistance setting. Ideally, you'll find a setting that allows you to shift into an easy enough gear to adequately recover but also allows you to shift into a gear that provides enough resistance for hard efforts. Generally, the mid to high resistance settings work best, as lower resistance settings tend to top out at less than 200 watts. Once you've selected an acceptable resistance setting, you'll want to establish your fitness level in relation to that resistance setting. We recommend that your next step be an FTP test. Thereafter, we strongly recommend that you continue to use the same resistance setting. As mentioned above, different resistance settings have different power curves. In other words, your FTP on one resistance setting may not be the same on another — even though each setting is for the same trainer. If you eventually decide that you'd like to use a different resistance setting, we recommend that you do a new FTP test.

No Smart Trainer? Use VirtualPower

How Does Recovery Work in the AI Training Simulation?

AI Training Simulation shows how completed and planned training will affect your readiness to train over the next 4 weeks. Inside the AI Training Simulation Window, yellow and red highlights will appear when planned and completed training requires a bit of extra rest afterwards. How Your AI Training Simulation Responds TrainerRoad AI evaluates your training history and the changes you make inside the 4-week Simulation Window to provide you with recommended rest and recovery days. Any time you complete a workout or modify your plan the system reanalyzes and updates predicted fatigue day by day, adjusting upcoming workouts accordingly. Yellow and Red highlights update live as you complete training sessions or make changes to upcoming workouts in the Simulation Window. - Avoid Intensity Days indicate rising fatigue. TrainerRoad AI will typically assign an easier session to promote recovery. You can also take a complete rest day if you feel it is needed! You will know that a day is a caution day because it will have a yellow highlight. - Rest Recommended days indicate potentially damaging fatigue. TrainerRoad AI will swap the next training day(s) for rest when needed. You will know that a day is a recommended rest day because it will have a red highlight. Screenshot 2026-01-15 at 12.42.25 PM.png What To Do When You See Caution's and Warnings 1. Accept the adjustment: We recommend following the easier or rest day the AI recommends to get the rest you need and keep training productively 2. Adjust if needed: If you've manually made a change to your training plan that results in an extra red or yellow day consider reverting back to the original plan. 3. Support recovery: Prioritize sleep, fueling, and hydration especially before sessions predicted to feel hard or very hard. How to Swap a Workout Back You can swap the workout that was on your Calendar before the red or yellow day by selecting the workout label behind the new workout scheduled on your Calendar. Screenshot 2026-01-15 at 12.49.19 PM.png Once you have done this you can choose to opt for the more intense workout. This will replace the new workout on your Calendar with the previously scheduled workout. Screenshot 2026-01-15 at 12.51.11 PM.png You will still have the option to make changes and return the newly recommended workout afterwards by following the same steps! Screenshot 2026-01-15 at 12.56.24 PM.png

TrainerRoad AI