Skip to content
Home Search Results

37 results for “Pairing”

Found 37 results

Bkool Pro

The Bkool Pro is an electronic, wheel-on trainer that uses an electromagnetic system to automatically control resistance during your workouts. First thing’s first! Make sure you’ve downloaded the TrainerRoad app here. bkool-pro-trainer.jpg Device Compatibility | | Connections | | Modes | | Calibration | | Cadence 1 | | --- | --- | --- | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | ERG | Resistance | Ant+ | Bluetooth | | | iOS | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Android | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Windows | ✔ 2 | ✔ 3,4 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Mac | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | Show footnotes [1] Cadence transmitted by a smart trainer is an estimation of your cadence. This may not always be 100% accurate given potential changes in ride data throughout pedal stroke especially during periods of inconsistent cadence. For best results, the use of a dedicated cadence sensor is suggested, but not required. [2] ANT+ USB or key may be required to connect to ANT+ devices. [3] When pairing the Bkool Pro via Bluetooth, ERG and Resistance mode are not available. The Bkool will only be able to pair as a power meter without any automatic resistance control. [4] In order to use Bluetooth with TrainerRoad, a device with Bluetooth 4.0 is required. See more information here. [5] Bkool trainers come "factory calibrated" and thus doesn't require nor can you complete a spindown calibration. How to Use Your Bkool Pro - Choosing Your Connection - Connect via ANT+. - Connect via Bluetooth. - Click here to learn how to pair your devices and adjust device settings. - Choosing Your Trainer's Mode - Erg Mode (default) - Resistance Mode - Calibration - Perform a Spindown calibration before each ride to ensure that your power is always as consistent as possible. - PowerMatch - Using a power meter along with your trainer? Here's how to use PowerMatch. Bkool Pro Troubleshooting Device Dropouts - Dropouts can be seen while riding as an absence of data. You may be experiencing device dropouts if your data values drop to zero, or to a null '--' value. - Why this happens: The most common culprit of dropouts are typically low batteries which cause a weak signal, and interference from other nearby devices. - The solution: Click the following link to learn how to avoid device dropouts. ANT+ USB not recognized - Click here to learn more about ANT+ Troubleshooting. Bluetooth not connecting properly - As mentioned above, when pairing your Bkool Pro to TrainerRoad, you will not be able to use ERG or resistance mode. Via Bluetooth, the Bkool Pro will only be able to pair as a power meter without any type of resistance control. - Click here to learn more about Bluetooth Smart 4.0 Troubleshooting. Issues pairing your device - When trying to pair your device if you're unable to see, or pair your device properly, there may be a connection issue. This could be caused by a faulty connection with the device or another application may be using your Bluetooth or ANT+ connection. - The solution: Click on the following link to learn more about device pairing troubleshooting. Wattage Floor - It takes a minimum amount of watts to simply turn the pedals on a bike. This minimum wattage requirement can increase even more in higher gears. For more information on wattage floor and what it can look like, click here. - The solution: Change into an easier gear. This will allow your trainer to spin slower, thus allowing it to reach lower power values. Inaccurate Speed - Speed readings when riding indoors on a smart trainer are inherently unreliable. The "speeds" riders achieve indoors are often not representative of speeds they'd be going outdoors at equivalent power levels. - Simply put, indoor speed readings can be misleading and don't add any value to the workout so TrainerRoad does not display them during your ride. To learn more about speed readings on a smart trainer, click here. Floating Power / Power Not Following Prescribed Power - Dropouts can cause your power values to get "stuck" in place and follow a constant power rather than changing with the workout profile. - The solution: Avoiding dropouts will help reduce the possibility of this happening. - Wattage floor/ceiling - If you find that your power is floating above your prescribed power, typically during a recovery interval, you may be experiencing wattage floor. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. To learn more about what a wattage floor is, click here. - Power smoothing set to too high of a value can give the illusion that your power is not following the target power when in reality, it is. Power smoothing takes a running average of your incoming power over the span of time that you have selected in your settings, 1-30 seconds. Your average power over that time span is then shown on your workout player. - Common cases - You would notice this at the onset of an interval. When the interval starts, you may notice that your power is lagging behind quite a bit and then eventually rises to meet the prescribed wattage. This is due to the running average that's being calculated. - The solution - To fix this, you may need to lower your power smoothing value in your settings. If power smoothing is desired, we recommend adjusting your settings to around 4-7 seconds for most workouts. This should allow you to visually smooth your power while still allowing it to your power to catch up quickly when entering intervals. - NOTE: PowerSmoothing only visually adjusts your power during your workout. Only raw data is stored during your ride. Due to this, you may notice a difference between post, and during, workout graphs. - ERG Mode Not Set: If your trainer is set to resistance mode (or slope/standard mode with some trainers) your power will not be automatically adjusted to match the target power. In this case, your power may be graphed similarly to that of a power meter and float around without following any workout profile. Automatic Resistance Control (ERG) mode is not working - If you're pairing your Bkool Pro via Bluetooth, your trainer will only be able to be paired as a power meter. Using this method of pairing will only allow power data transfer without the ability to manually or automatically control resistance levels - The Solution: In order to pair your trainer as a smart trainer, you'll need to pair via ANT+ instead. - Note: Bkool had indicated that there was a bug in their firmware that caused the resistance adjustment problems many Bkool users were experiencing. Not to worry though! They've released a firmware update with a fix for this, which is necessary for the best performance and functionality. Please read this article for instructions on how to update the Bkool firmware. Bkool Pro Best Practices Update Firmware - Updating your trainer's firmware to the latest release is very important. Many of these updates contain fixes that the manufacturer has been working on. Updating your firmware whenever the latest release is available will make sure that your device is always up-to-date with the most recent features and improvements. - Follow the steps found in this article to update your Bkool Pro's firmware. Gearing - When using ERG mode, follow the gearing suggestions found in our smart trainer modes explained article for best results. - If using resistance, or standard/slope mode, you will need to make sure to shift your gears just as you would when riding outdoors. Doing so will allow you to reach your prescribed target power during your workout. Tire Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, make sure to check the following: - Calibrate before each ride - Ensure that your tire is inflated to the same pressure before each ride. Trainer Contact Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, you should make sure that your trainer contact pressure is the same each time that you install your bike on the trainer. When tightening the roller onto your wheel, once the trainer touches the wheel, turn the knob 2-3 full rotations. Remember how much you tighten this tension before each workout and follow the same steps each time you place your bike back on the trainer.

Trainers & Power Meters

Bkool Pro 2

The Bkool Pro 2 is an electronic, wheel-on trainer that uses an electromagnetic system to automatically control resistance during your workouts. First thing’s first! Make sure you’ve downloaded the TrainerRoad app here. Bkool_Pro_2_360_00025.jpg Device Compatibility | | Connections | | Modes | | Calibration | | Cadence 1 | | --- | --- | --- | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | ERG | Resistance | Ant+ | Bluetooth | | | iOS | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Android | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Windows | ✔ 2 | ✔ 3,4 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | | Mac | ✔ 2 | ✔3 | ✔ | ✔ | N/A 5 | N/A 5 | ✔ | Show footnotes [1] Cadence transmitted by a smart trainer is an estimation of your cadence. This may not always be 100% accurate given potential changes in ride data throughout pedal stroke especially during periods of inconsistent cadence. For best results, the use of a dedicated cadence sensor is suggested, but not required. [2] ANT+ USB or key may be required to connect to ANT+ devices. [3] When pairing the Bkool Pro 2 via Bluetooth, ERG and Resistance mode are not available. The Bkool will only be able to pair as a power meter without any automatic resistance control. [4] In order to use Bluetooth on Windows devices, a Bluetooth dongle is required. See more information here. [5] Bkool trainers come "factory calibrated" and thus doesn't require nor can you complete a spindown calibration. How to Use Your Bkool Pro 2 - Choosing Your Connection - Connect via ANT+. - Connect via Bluetooth. - Click here to learn how to pair your devices and adjust device settings. - Choosing Your Trainer's Mode - Erg Mode (default) - Resistance Mode - Calibration - Perform a Spindown calibration before each ride to ensure that your power is always as consistent as possible. - PowerMatch - Using a power meter along with your trainer? Here's how to use PowerMatch. Bkool Pro 2 Troubleshooting Device Dropouts - Dropouts can be seen while riding as an absence of data. You may be experiencing device dropouts if your data values drop to zero, or to a null '--' value. - Why this happens: The most common culprit of dropouts are typically low batteries which cause a weak signal, and interference from other nearby devices. - The solution: Click the following link to learn how to avoid device dropouts. ANT+ USB not recognized - Click here to learn more about ANT+ Troubleshooting. Bluetooth not connecting properly - As mentioned above, when pairing your Bkool Pro 2 to TrainerRoad, you will not be able to use ERG or resistance mode. Via Bluetooth, the Bkool Pro 2 will only be able to pair as a power meter without any type of resistance control. - Click here to learn more about Bluetooth Smart 4.0 Troubleshooting. Issues pairing your device - When trying to pair your device if you're unable to see, or pair your device properly, there may be a connection issue. This could be caused by a faulty connection with the device or another application may be using your Bluetooth or ANT+ connection. - The solution: Click on the following link to learn more about device pairing troubleshooting. Wattage Floor - It takes a minimum amount of watts to simply turn the pedals on a bike. This minimum wattage requirement can increase even more in higher gears. For more information on wattage floor and what it can look like, click here. - The solution: Change into an easier gear. This will allow your trainer to spin slower, thus allowing it to reach lower power values. Inaccurate Speed - Speed readings when riding indoors on a smart trainer are inherently unreliable. The "speeds" riders achieve indoors are often not representative of speeds they'd be going outdoors at equivalent power levels. - Simply put, indoor speed readings can be misleading and don't add any value to the workout so TrainerRoad does not display them during your ride. To learn more about speed readings on a smart trainer, click here. Floating Power / Power Not Following Prescribed Power - Dropouts can cause your power values to get "stuck" in place and follow a constant power rather than changing with the workout profile. - The solution: Avoiding dropouts will help reduce the possibility of this happening. - Wattage floor/ceiling - If you find that your power is floating above your prescribed power, typically during a recovery interval, you may be experiencing wattage floor. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. To learn more about what a wattage floor is, click here. - Power smoothing set to too high of a value can give the illusion that your power is not following the target power when in reality, it is. Power smoothing takes a running average of your incoming power over the span of time that you have selected in your settings, 1-30 seconds. Your average power over that time span is then shown on your workout player. - Common cases - You would notice this at the onset of an interval. When the interval starts, you may notice that your power is lagging behind quite a bit and then eventually rises to meet the prescribed wattage. This is due to the running average that's being calculated. - The solution - To fix this, you may need to lower your power smoothing value in your settings. If power smoothing is desired, we recommend adjusting your settings to around 4-7 seconds for most workouts. This should allow you to visually smooth your power while still allowing it to your power to catch up quickly when entering intervals. - NOTE: PowerSmoothing only visually adjusts your power during your workout. Only raw data is stored during your ride. Due to this, you may notice a difference between post, and during, workout graphs. - ERG Mode Not Set: If your trainer is set to resistance mode (or slope/standard mode with some trainers) your power will not be automatically adjusted to match the target power. In this case, your power may be graphed similarly to that of a power meter and float around without following any workout profile. Automatic Resistance Control (ERG) mode is not working - If you're pairing your Bkool Pro 2 via Bluetooth, your trainer will only be able to be paired as a power meter. Using this method of pairing will only allow power data transfer without the ability to manually or automatically control resistance levels - The Solution: In order to pair your trainer as a smart trainer, you'll need to pair via ANT+ instead. - Note: Bkool had indicated that there was a bug in their firmware that caused the resistance adjustment problems many Bkool users were experiencing. Not to worry though! They've released a firmware update with a fix for this, which is necessary for the best performance and functionality. Please read this article for instructions on how to update the Bkool firmware. Bkool Pro 2 Best Practices Update Firmware - Updating your trainer's firmware to the latest release is very important. Many of these updates contain fixes that the manufacturer has been working on. Updating your firmware whenever the latest release is available will make sure that your device is always up-to-date with the most recent features and improvements. - Follow the steps found in this article to update your Bkool Pro 2's firmware. Gearing - When using ERG mode, follow the gearing suggestions found in our smart trainer modes explained article for best results. - If using resistance, or standard/slope mode, you will need to make sure to shift your gears just as you would when riding outdoors. Doing so will allow you to reach your prescribed target power during your workout. Tire Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, make sure to check the following: - Calibrate before each ride - Ensure that your tire is inflated to the same pressure before each ride. Trainer Contact Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, you should make sure that your trainer contact pressure is the same each time that you install your bike on the trainer. When tightening the roller onto your wheel, once the trainer touches the wheel, turn the knob 2-3 full rotations. Remember how much you tighten this tension before each workout and follow the same steps each time you place your bike back on the trainer.

Trainers & Power Meters

Wahoo KICKR

The KICKR, made by Wahoo Fitness, is a direct drive smart trainer that uses automatic resistance control (ERG mode) to seamlessly match your power output to the prescribed power of your TrainerRoad workout. Its heavy flywheel provides a smooth power output as you ride to give you a true road feel. First thing’s first! Make sure you’ve downloaded the TrainerRoad app here. daniel_wahoo-kickr-17-power-trainer-2.png Device Compatibility | | Connections | | Modes | | Calibration | | Cadence 1 | | --- | --- | --- | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | ERG | Resistance | Ant+ | Bluetooth | | | iOS | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Android | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Windows | ✔ 2 | ✔ 3 | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Mac | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | Show footnotes [1] Cadence transmitted by a smart trainer is an estimation of your cadence. This may not always be 100% accurate given potential changes in ride data throughout pedal stroke especially during periods of inconsistent cadence. For best results, the use of a dedicated cadence sensor is suggested, but not required. [2] ANT+ USB or key may be required to connect to ANT+ devices. [3] In order to use Bluetooth on Windows devices, a Bluetooth dongle is required. See more information here. [4] Cadence is not a feature that the KICKR supports. In order to have cadence with TrainerRoad using this trainer, you will need a dedicated cadence device. How to Use Your KICKR - Choosing Your Connection - Connect via ANT+. - Connect via Bluetooth. - Click here to learn how to pair your devices and adjust device settings. - Choosing Your Trainer's Mode - Erg Mode (default) - Resistance Mode - Calibration - Perform a Spindown calibration before each ride to ensure that your power is always as consistent as possible. - Note: KICKR v5's and newer models (any model past 2018) automatically calibrate on the fly as you ride. There's no need to calibrate manually with a spindown due to this functionality. You can learn more about this self-calibrating process here. - PowerMatch - Using a power meter along with your trainer? Here's how to use PowerMatch. KICKR Troubleshooting Device Dropouts - Dropouts can be seen while riding as an absence of data. You may be experiencing device dropouts if your data values drop to zero, or to a null '--' value. - Why this happens: The most common culprit of dropouts are typically low batteries which cause a weak signal, and interference from other nearby devices. - The solution: Click the following link to learn how to avoid device dropouts. ANT+ USB not recognized - Click here to learn more about ANT+ Troubleshooting. Bluetooth not connecting properly - Click here to learn more about Bluetooth Smart 4.0 Troubleshooting. Issues pairing your device - When trying to pair your device if you're unable to see, or pair your device properly, there may be a connection issue. This could be caused by a faulty connection with the device or another application may be using your Bluetooth or ANT+ connection. - The solution: Click on the following link to learn more about device pairing troubleshooting. Wattage Floor - It takes a minimum amount of watts to simply turn the pedals on a bike. This minimum wattage requirement can increase even more in higher gears. For more information on wattage floor and what it can look like, click here. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. Inaccurate Speed - Speed readings when riding indoors on a smart trainer are inherently unreliable. The "speeds" riders achieve indoors are often not representative of speeds they'd be going outdoors at equivalent power levels. - Simply put, indoor speed readings can be misleading and don't add any value to the workout so TrainerRoad does not display them during your ride. To learn more about speed readings on a smart trainer, click here. Floating Power / Power Not Following Prescribed Power - Dropouts can cause your power values to get "stuck" in place and follow a constant power rather than changing with the workout profile. - The solution: Avoiding dropouts will help reduce the possibility of this happening. - Wattage floor/ceiling - If you find that your power is floating above your prescribed power, typically during a recovery interval, you may be experiencing wattage floor. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. To learn more about what a wattage floor is, click here. - Power smoothing set to too high of a value can give the illusion that your power is not following the target power when in reality, it is. Power smoothing takes a running average of your incoming power over the span of time that you have selected in your settings, 1-30 seconds. Your average power over that time span is then shown on your workout player. - Common cases - You would notice this at the onset of an interval. When the interval starts, you may notice that your power is lagging behind quite a bit and then eventually rises to meet the prescribed wattage. This is due to the running average that's being calculated. - The solution - To fix this, you may need to lower your power smoothing value in your settings. If power smoothing is desired, we recommend adjusting your settings to around 4-7 seconds for most workouts. This should allow you to visually smooth your power while still allowing it to your power to catch up quickly when entering intervals. - NOTE: PowerSmoothing only visually adjusts your power during your workout. Only raw data is stored during your ride. Due to this, you may notice a difference between post, and during, workout graphs. - ERG Mode Not Set: If your trainer is set to resistance mode (or slope/standard mode with some trainers) your power will not be automatically adjusted to match the target power. In this case, your power may be graphed similarly to that of a power meter and float around without following any workout profile. Resistance Lock-up During Ride - When pedaling at a low cadence, or if you change during a change in prescribed power, it's possible that your KICKR can dramatically increase the resistance and prevent you from pedaling as the resistance continues to climb. - The solution: Begin backpedaling for around 5-10 seconds as the resistance unit loosens its grip. Then carry on pedaling. Erratic Power Values and Dropouts: Generation 1 KICKR Only - If you're using a generation 1 KICKR (notice it does not have a handle and it has a zebra pattern opposite the cassette) and you're experiencing wildly fluctuating power, or a continual dropout, you may need to clean your optical sensor. - To clean the optical sensor, gently rub a paper towel through the area shown below. image-2.png image-3.png KICKR Best Practices Calibration - For the most accurate and consistent power readings, make sure to perform a spindown calibration before each ride. - If time allows, the optimal solution would be to perform a spindown calibration after spinning for around 5-10 minutes to warm up internal components. Update Firmware - Updating your trainer's firmware to the latest release is very important. Many of these updates contain fixes that the manufacturer has been working on. Updating your firmware whenever the latest release is available will make sure that your device is always up-to-date with the most recent features and improvements. - To update your KICKR's firmware using an Android device, follow the directions found here. - To update your KICKR's firmware using an iOS device, follow the directions found here. Gearing - When using ERG mode, follow the gearing suggestions found in our smart trainer modes explained article for best results. - If using resistance, or standard/slope mode, you will need to make sure to shift your gears just as you would when riding outdoors. Doing so will allow you to reach your prescribed target power during your workout.

Trainers & Power Meters

Bluetooth Smart (4.0) Troubleshooting

Experiencing problems pairing Bluetooth devices to TrainerRoad? You're in the right place to get some help! This article will help you identify solutions to your Bluetooth connections on your desktop or mobile device. IMPORTANT: The first thing is to make sure that your Bluetooth Smart devices aren't currently paired to any other devices or applications. Bluetooth devices can only pair to one receiver at a time, so if they're already paired somewhere else, they'll be invisible to TrainerRoad. About Bluetooth Smart Bluetooth Smart (4.0) is a wireless communication protocol that devices such as heart rate straps, speed/cadence sensors, and trainers use to communicate with TrainerRoad. Bluetooth connections are much like a phone call; they create connections that directly link one device to another. This varies from ANT+ which acts more as a radio transmitter that allows anyone with a radio receiver to "listen" to the data. Note: Bluetooth devices can only pair to one device at a time. If your device is paired to any other computer/device/head unit etc. your device will not be "visible" to any other platform until the connection has been disconnected. iOS Bluetooth Troubleshooting - Bluetooth Unavailable - Enable Bluetooth - If you've navigated to the "Devices" tab within the TrainerRoad app, and you see "Bluetooth Off" in the upper right-hand corner, make sure that you've properly enabled Bluetooth. You can do this by navigating to your iOS Settings. From here, click on the Bluetooth tab, and enable the Bluetooth toggle. - Dropouts - Sensor Battery - When a device battery gets low, the reception distance decreases. Try replacing the device battery. Some devices report their battery condition over Bluetooth, and we display that on the Devices page. (Bear in mind, this is not a universal feature for all Bluetooth devices, and no Bluetooth speed/cadence sensors can report it due to a protocol limitation.) Simply put, if you think your battery is low, go ahead and replace it to see if the connection improves. - If your head unit picks up the signal, but TrainerRoad does not try moving your bike setup closer to your computer or phone. Sometimes a couple of feet can make a big difference. ant-device-dropout-battery-level.png - Interference - Wireless devices such as 2.4 GHz routers, wireless speakers and wireless mice may interfere with the Bluetooth signal. ANT+ and Bluetooth use the 2.4 GHz band. Try moving any other wireless devices a couple of feet away. If you suspect your router to be interfering, you can change your wireless channel. - Obstructions - Is something blocking the sensor? Try removing any physical obstructions between your computer or mobile device and the Bluetooth device. - Direct Line of Sight - Do your best to ensure that your computer has the most direct line of sight possible to your sensors. Simply put, the closer and more level your devices are to your phone or computer, the better readings you will get. - Device Conflicts: "Stealing" the Bluetooth connection - Bluetooth devices can only pair to one device at a time. If any other application, head unit, computer, or device is paired to the device you're trying to pair, TrainerRoad will not be able to "see" the device. You will need to make sure that your device is unpaired from every other app/computer/device etc... before attempting to pair it to TrainerRoad. Android Bluetooth Troubleshooting - Bluetooth Unavailable - Enable Bluetooth - If you've navigated to the "Devices" tab and you see "Bluetooth Off" in the upper right-hand corner, make sure that you've properly enabled Bluetooth. You can do this by navigating to your Android Settings App. From here, click on the Bluetooth tab and enable Bluetooth. - Locational Services Permissions - Given recent software updates on Android, TrainerRoad is now required to be granted access to your locational services in order to use Bluetooth. This is due to the nature of Bluetooth architecture on Android devices. - When enabling Bluetooth and attempting to pair devices within TrainerRoad for the first time, you will be prompted to accept these permissions. - If you have already declined these permissions, you can accept them by navigating to your Android device settings by following this path: - Apps & Notifications - App Permissions - Location - TrainerRoad - Enable the locational services toggle - Dropouts - Sensor Battery - When a device battery gets low, the reception distance decreases. Try replacing the device battery. Some devices report their battery condition over Bluetooth, and we display that on the Devices page. (Bear in mind, this is not a universal feature for all Bluetooth devices, and no Bluetooth speed/cadence sensors can report it due to a protocol limitation.) Simply put, if you think your battery is low, go ahead and replace it to see if the connection improves. - If your head unit picks up the signal, but TrainerRoad does not, try moving your bike setup closer to your computer or phone. Sometimes a couple of feet can make a big difference. ant-device-dropout-battery-level.png - Interference - Wireless devices such as 2.4 GHz routers, wireless speakers and wireless mice may interfere with the Bluetooth signal. ANT+ and Bluetooth use the 2.4 GHz band. Try moving any other wireless devices a couple of feet away. If you suspect your router to be interfering, you can change your wireless channel. - Obstructions - Is something blocking the sensor? Try removing any physical obstructions between the sensor and the Bluetooth device. - Direct Line of Sight - Do your best to ensure that your computer has the most direct line of sight possible to your sensors. Simply put, the closer and more level your devices are to your phone or computer, the better readings you will get. - Device Conflicts: "Stealing" the Bluetooth connection - Bluetooth devices can only pair to one device at a time. If any other application, head unit, computer, or device is paired to the device you're trying to pair, TrainerRoad will not be able to "see" the device. You will need to make sure that your device is unpaired from every other app/computer/device etc... before attempting to pair it to TrainerRoad. Mac Bluetooth Troubleshooting Bluetooth 4.0 comes native in most Mac desktops and laptops since 2011. This means that you do not need a Bluetooth dongle to pair Bluetooth Smart devices to TrainerRoad! Here is a more specific list of Apple devices that come with built-in Bluetooth Smart: - MacBook Air (mid 2011+) - Mac Mini (late 2011+) - MacBook Pro (mid 2012+) - iMac (early 2013+) - iPhone 4s+ - iPad Mini, Air, Air 2 - Bluetooth Unavailable - Enable Bluetooth - If you've navigated to the "Devices" tab and you see "Bluetooth Off" in the upper right-hand corner, make sure that you've properly enabled Bluetooth. You can do this by navigating to your System Preferences. From here, click on the Bluetooth icon and enable Bluetooth. - Allow Bluetooth Access (Mac OS Big Sur Only) - On Big Sur, you get a notification when opening TR for the first time if you want to allow Bluetooth access. If this is denied and Bluetooth isn't displayed as ON, check: - System Preferences > Security & Privacy > Privacy > Bluetooth > Ensure TR is checked. - Dropouts - Sensor Battery - When a device battery gets low, the reception distance decreases. Try replacing the device battery. Some devices report their battery condition over Bluetooth, and we display that on the Devices page. (Bear in mind, this is not a universal feature for all Bluetooth devices, and no Bluetooth speed/cadence sensors can report it due to a protocol limitation.) Simply put, if you think your battery is low, go ahead and replace it to see if the connection improves. - If your head unit picks up the signal, but TrainerRoad does not, try moving your bike setup closer to your computer or phone. Sometimes a couple of feet can make a big difference. ant-device-dropout-battery-level.png - Interference - Wireless devices such as 2.4 GHz routers, wireless speakers and wireless mice may interfere with the Bluetooth signal. ANT+ and Bluetooth use the 2.4 GHz band. Try moving any other wireless devices a couple of feet away. If you suspect your router to be interfering, you can change your wireless channel. - Obstructions - Is something blocking the sensor? Try removing any physical obstructions between the sensor and the Bluetooth device. - Direct Line of Sight - Do your best to ensure that your computer has the most direct line of sight possible to your sensors. Simply put, the closer and more level your devices are to your phone or computer, the better readings you will get. - Device Conflicts: "Stealing" the Bluetooth connection - Bluetooth devices can only pair to one device at a time. If any other application, head unit, computer, or device is paired to the device you're trying to pair, TrainerRoad will not be able to "see" the device. You will need to make sure that your device is unpaired from every other app/computer/device etc... before attempting to pair it to TrainerRoad. - Older Mac without native Bluetooth 4.0 - The IOGEAR or ORICO dongles can work for Macs that don't come with native BT 4.0. Unfortunately, those dongles don't seem to work consistently with older Macs - especially if the user is running Mavericks. *This is not a recommended approach, but if you have the dongles you can give it a try.*For OSX 10.7 and earlier, you may be able to get the dongle working by following this article: Using unsupported Bluetooth 4.0 USB dongle with OS X.For OSX 10.9 or newer, try following these steps: - If you have a Bluetooth mouse, you need to have a wired mouse handy. A wired keyboard is nice, but not strictly necessary. - Get the "Hardware IO Tools for Xcode" from here: https://developer.apple.com/downloads/index.action (Apple login required) This includes the "Bluetooth Explorer" utility. - Launch Bluetooth Explorer. A top menu will only appear. Go to Tools => HCI Controller Selector. This setting allows you to change what Bluetooth controller the system will use as its primary. - Before swapping it, plug in your wired mouse and un-pair all Bluetooth devices on the system in the system preferences (100% necessary or you will not be able to re-pair them with the new controller!). Once that's done, change it to your new controller. The utility says that this will not stick with a restart, but I've found that it actually does. It will ask for your password. If you are now keyboard-less, pull up the virtual keyboard and enter it. - The new controller is active and you can now repair your devices. This took me a few tries, for whatever reason they didn't pair right away, but they did within 5 minutes or so. - Go to TrainerRoad and search for the BT controller. Windows Bluetooth Troubleshooting Bluetooth 4.0 is native on many Windows 10 machines. Pre-Windows 10 (7, 8, and 8,1) require a BLED112 USB dongle in order to enable Bluetooth connectivity with TrainerRoad. - Device Conflicts: "Stealing" the Bluetooth connection - Bluetooth devices can only pair to one device at a time. If any other application, head unit, computer, or device is paired to the device you're trying to pair, TrainerRoad will not be able to "see" the device. You will need to make sure that your device is unpaired from every other app/computer/device etc... before attempting to pair it to TrainerRoad. - If the trainer shows up as paired in Windows Bluetooth settings, remove it there. TrainerRoad should connect directly without Windows pairing - Bluetooth Unavailable - Enable Bluetooth - If you've navigated to the "Devices" tab and you see "Bluetooth Off" in the upper right-hand corner, make sure that you've properly enabled Bluetooth. You can do this by navigating to your Action Center. 1. Press Windows Key + A 2. Ensure the Bluetooth tile is highlighted and on. 3. If you don't see the Bluetooth tile, select "Expand". 4. (Ensure "Flight Mode" is disabled as this disables Bluetooth). - If Bluetooth still shows "Off" within TrainerRoad, read the section below to check for native Bluetooth 4.0 support. Your computer may require a BLED112 USB dongle. - Windows 10 Bluetooth - While many Windows 10 machines have native Bluetooth 4.0 support, not all have the hardware to support it. To confirm support on your computer, follow these steps: 1. Press the "Windows Key" + X to open the Win + X menu. 2. Select "Device Manager". 3. Search for a "Bluetooth" category. 4. If you don't see "Bluetooth", search for "Network Adapters" in this list. Bluetooth radios may be within this category instead. - If you're unable to locate the folders above to confirm native Bluetooth on your computer, check the following: 1. Open "Control Panel". 2. Select "Network and Sharing Center". 3. Select "Change Adapter Settings" to open network connections. 4. If you don't see "Bluetooth Network Connection" listed here, your machine doesn't have native Bluetooth 4.0 and you'll require the BLED112 USB dongle to connect your Bluetooth devices to TrainerRoad. - BLED 112 USB Dongle - Although Windows computers have built-in Bluetooth, you will need a BLED112 dongle in order to pair your Bluetooth devices to TrainerRoad. Without it, no devices will be able to pair to your TrainerRoad application. - If you're running into problems with the BLED 112, even after installing the drivers, try the following steps: 1. Make sure the BLED is plugged into your computer's USB port. Open the Device Manager. 2. Next click on "Ports (COM & LPT)" You should now see your BLED under the name of 'Bluegiga Bluetooth Low Energy' with a COM number. 3. Right click on the BLED and click 'Update Driver Software'. 4. Click 'Browse my computer for driver software', and locate the TrainerRoad USB Drivers you downloaded from the link above. This is typically located in "C:\Program Files\TrainerRoad USBdrivers" or \Program Files (x86)\ if you're on a 64bit operating system. 5. Start TrainerRoad and click 'Search for Bluetooth 4.0' in the Devices tab. If that doesn't work, and you still don't see pairing options for Bluetooth, try plugging the BLED-112 into a different USB port and trying again. bluegiga.png - Dropouts - Sensor Battery - When a device battery gets low, the reception distance decreases. Try replacing the device battery. Some devices report their battery condition over Bluetooth, and we display that on the Devices page. (Bear in mind, this is not a universal feature for all Bluetooth devices, and no Bluetooth speed/cadence sensors can report it due to a protocol limitation.) Simply put, if you think your battery is low, go ahead and replace it to see if the connection improves. - If your head unit picks up the signal, but TrainerRoad does not, try moving your bike setup closer to your computer or phone. Sometimes a couple of feet can make a big difference. ant-device-dropout-battery-level.png - Interference - Wireless devices such as 2.4 GHz routers, wireless speakers and wireless mice may interfere with the Bluetooth signal. ANT+ and Bluetooth use the 2.4 GHz band. Try moving any other wireless devices a couple of feet away. If you suspect your router to be interfering, you can change your wireless channel. - Obstructions - Is something blocking the sensor? Try removing any physical obstructions between the sensor and the Bluetooth device - Direct Line of Sight - Do your best to ensure that your computer has the most direct line of sight possible to your sensors. Simply put, the closer and more level your devices are to your phone or computer, the better readings you will get. - Missing Drivers - In order to pair Bluetooth devices, you'll need to make sure that you have all Bluetooth drivers installed. You can download Bluetooth Smart drivers here. Still having problems? If you've gone through all the steps above, shoot us an email at [email protected]. To help us with the ticket, please let us know your username, your operating system, your computer brand, how the above steps went for you.

Pairing & Connection Problems

Wahoo KICKR Snap

The Wahoo KICKR Snap is a smart trainer that connects to TrainerRoad via either ANT+ or Bluetooth Smart. TrainerRoad can automatically control the KICKR Snap's resistance in accordance with the workout's profile. This is a wheel-on trainer that uses its heavy flywheel to deliver smooth power. First thing’s first! Make sure you’ve downloaded the TrainerRoad app here. Screen_Shot_2019-02-16_at_18.12.25.png Device Compatibility | | Connections | | Modes | | Calibration | | Cadence 1 | | --- | --- | --- | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | ERG | Resistance | Ant+ | Bluetooth | | | iOS | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Android | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Windows | ✔ 2 | ✔ 3 | ✔ | ✔ | ✔ | ✔ | N/A 4 | | Mac | ✔ 2 | ✔ | ✔ | ✔ | ✔ | ✔ | N/A 4 | Show footnotes [1] Cadence transmitted by a smart trainer is an estimation of your cadence. This may not always be 100% accurate given potential changes in ride data throughout pedal stroke especially during periods of inconsistent cadence. For best results, the use of a dedicated cadence sensor is suggested, but not required. [2] ANT+ USB or key may be required to connect to ANT+ devices. [3] In order to use Bluetooth on Windows devices, a Bluetooth dongle is required. See more information here. [4] Cadence is not a feature that the KICKR Snap supports. In order to have cadence with TrainerRoad using this trainer, you will need a dedicated cadence device. How to Use Your KICKR Snap - Choosing Your Connection - Connect via ANT+. - Connect via Bluetooth. - Click here to learn how to pair your devices and adjust device settings. - Choosing Your Trainer's Mode - Erg Mode (default) - Resistance Mode - Setup - Calibration - Perform a Spindown calibration before each ride to ensure that your power is always as consistent as possible. - Trainer Pressure - Rolling resistance (with regards to TrainerRoad) is defined as the amount of pressure on your tire from the trainer's roller. This is an important variable to keep consistent between rides to keep your training as consistent as possible. Keep track of how many turns you tighten your trainer onto your wheel and repeat the same steps each time you remove/install your bike. - Tire Pressure - Tire pressure can also affect rolling resistance. Make sure you pump your tires up to the same amount of pressure for each workout. - PowerMatch - Using a power meter along with your KICKR Snap? Here's how to use PowerMatch. KICKR Snap Troubleshooting Device Dropouts - Dropouts can be seen while riding as an absence of data. You may be experiencing device dropouts if your data values drop to zero, or to a null '--' value. - Why this happens: The most common culprit of dropouts are typically low batteries which cause a weak signal, and interference from other nearby devices. - The solution: Click the following link to learn how to avoid device dropouts. ANT+ USB not recognized - Click here to learn more about ANT+ Troubleshooting. Bluetooth not connecting properly - Click here to learn more about Bluetooth Smart 4.0 Troubleshooting. Issues pairing your device - When trying to pair your device if you're unable to see, or pair your device properly, there may be a connection issue. This could be caused by a faulty connection with the device or another application may be using your Bluetooth or ANT+ connection. - The solution: Click on the following link to learn more about device pairing troubleshooting. Wattage Floor - It takes a minimum amount of watts to simply turn the pedals on a bike. This minimum wattage requirement can increase even more in higher gears. For more information on wattage floor and what it can look like, click here. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. Inaccurate Speed - Speed readings when riding indoors on a smart trainer are inherently unreliable. The "speeds" riders achieve indoors are often not representative of speeds they'd be going outdoors at equivalent power levels. Simply put, indoor speed readings can be misleading and don't add any value to the workout so TrainerRoad does not display them during your ride. To learn more about speed readings on a smart trainer, click here. Floating Power / Power Not Following Prescribed Power - Dropouts can cause your power values to get "stuck" in place and follow a constant power rather than changing with the workout profile. - The solution: Avoiding dropouts will help reduce the possibility of this happening. - Wattage floor/ceiling - If you find that your power is floating above your prescribed power, typically during a recovery interval, you may be experiencing wattage floor. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. To learn more about what a wattage floor is, click here. - Power smoothing set to too high of a value can give the illusion that your power is not following the target power when in reality, it is. Power smoothing takes a running average of your incoming power over the span of time that you have selected in your settings, 1-30 seconds. Your average power over that time span is then shown on your workout player. - Common cases - You would notice this at the onset of an interval. When the interval starts, you may notice that your power is lagging behind quite a bit and then eventually rises to meet the prescribed wattage. This is due to the running average that's being calculated. - The solution - To fix this, you may need to lower your power smoothing value in your settings. If power smoothing is desired, we recommend adjusting your settings to around 4-7 seconds for most workouts. This should allow you to visually smooth your power while still allowing it to your power to catch up quickly when entering intervals. - NOTE: PowerSmoothing only visually adjusts your power during your workout. Only raw data is stored during your ride. Due to this, you may notice a difference between post, and during, workout graphs. - ERG Mode Not Set: If your trainer is set to resistance mode (or slope/standard mode with some trainers) your power will not be automatically adjusted to match the target power. In this case, your power may be graphed similarly to that of a power meter and float around without following any workout profile. Resistance Lock-up During Ride - When pedaling at a low cadence, or if your change cadence during a change in prescribed power, it's possible that your KICKR Snap can dramatically increase the resistance and prevent you from pedaling as the resistance continues to climb. - The solution: Begin backpedaling for around 5-10 seconds as the resistance unit loosens its grip. Then carry on pedaling. Tire Slippage - If you find that your tire slips when pedaling, you may need to increase the tension between your tire and the trainer. - Solution: Tighten the trainer contact knob in 45-degree increments until the slippage stops. Also, make certain that your tire is inflated to the proper pressure as this will help the contact pressure between the two surfaces. KICKR Snap Best Practices Calibration - For the most accurate and consistent power readings, make sure to perform a spindown calibration before each ride. - If time allows, the optimal solution would be to perform a spindown calibration after spinning for around 5-10 minutes to warm up internal components and tire to trainer contact. Update Firmware - Updating your trainer's firmware to the latest release is very important. Many of these updates contain fixes that the manufacturer has been working on. Updating your firmware whenever the latest release is available will make sure that your device is always up-to-date with the most recent features and improvements. - To update your KICKR Snap's firmware using an Android device, follow the directions found here. - To update your KICKR Snap's firmware using an iOS device, follow the directions found here Gearing - When using ERG mode, follow the gearing suggestions found in our smart trainer modes explained article for best results. - If using resistance, or standard/slope mode, you will need to make sure to shift your gears just as you would when riding outdoors. Doing so will allow you to reach your prescribed target power during your workout. Tire Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, make sure to check the following: - Calibrate before each ride - Ensure that your tire is inflated to the same pressure before each ride. Trainer Contact Pressure - To ensure that you're experiencing the most consistent training with a wheel-on trainer, you should make sure that your trainer contact pressure is the same each time that you install your bike on the trainer. When tightening the roller onto your wheel, once the trainer touches the wheel, turn the knob 2-3 full rotations. Remember how much you tighten this tension before each workout and follow the same steps each time you place your bike back on the trainer.

Trainers & Power Meters

Wattbike & Wattbike Atom

The Wattbike Pro/Trainer and Wattbike Atom are both adjustable stationary bikes that measure power output. The Wattbike Trainer offers a realistic cycling experience with manual resistance control and a robust, durable design suited for high-intensity workouts. You can learn more about the Wattbike here. In contrast, the Wattbike Atom features automatic resistance control (ERG mode) and advanced connectivity options, providing a seamless and highly interactive training experience. wattbike-pro.webp Wattbike Pro WattbikeAttom.jpg Wattbike Atom Wattbike Atom and Wattbike Pro/Trainer TrainerRoad Compatibility Both the Wattbike Atom and Wattbike Trainer/Pro are compatible with TrainerRoad. You can connect these bikes to TrainerRoad as a power meter via ANT+ or Bluetooth. However, speed data won’t be recorded in TrainerRoad. If you have a heart rate monitor paired to your Wattbike head unit, it’s not possible to rebroadcast the HR data to TrainerRoad. To use HR data with TrainerRoad, you’ll need to pair your heart rate monitor directly to the TrainerRoad app. Device Compatibility Wattbike Trainer/Pro | Connections | | | | Calibration1 | | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | Calibration1 | | | iOS | ✔ | ✔ | N/A1 | | | Android | ✔ | ✔ | N/A1 | | | Windows | ✔ | ✔ | N/A1 | | | Mac | ✔ | ✔ | N/A1 | | Show footnotes [1] All calibrations are done through the Wattbike Performance Monitor head unit. Wattbike Atom | Connections | | Modes | | Calibration 4 | | Cadence 1 | | | --- | --- | --- | --- | --- | --- | --- | --- | | | Ant+ | Bluetooth | ERG | Resistance | Ant+ | Bluetooth | | | iOS | ✔ 2 | ✔ | ✔ | ✕ | ✔ 4 | ✔ 4 | N/A 1 | | Android | ✔ 2 | ✔ | ✔ | ✕ | ✔ 4 | ✔ 4 | N/A 1 | | Windows | ✔ 2 | ✔ 3 | ✔ | ✕ | ✔ 4 | ✔ 4 | N/A 1 | | Mac | ✔ 2 | ✔ | ✔ | ✕ | ✔ 4 | ✔ 4 | N/A 1 | Show footnotes [1] Cadence transmitted is an estimation of your cadence. This may not always be 100% accurate given potential changes in ride data throughout pedal stroke, especially during periods of inconsistent cadence. For best results, the use of a dedicated cadence sensor is suggested, but not required. [2] ANT+ USB or key may be required to connect to ANT+ devices. [3] In order to use Bluetooth on Windows devices, a Bluetooth dongle may be required. See more information here. [4] The Wattbike Atom is factory-calibrated, which means there is no need to calibrate it. How to Use Your Wattbike: Choosing Your Connection - Connect via ANT+ - Connect via Bluetooth - Click here to learn how to pair your devices and adjust device settings. PowerMatch - Using a power meter along with your trainer? Here's how to use PowerMatch. Connecting the Wattbike Pro/Trainer to TrainerRoad First, make sure you’ve downloaded the TrainerRoad app here. The Wattbike comes with a head unit that broadcasts the data to TrainerRoad. There are two different models of the Wattbike head unit. - Model A Monitor - Can broadcast via ANT+ only. NOTE: Model A Monitor can be upgraded to Model B for a cost if the user sends their old monitor to WattBike - Model B Monitor - Can broadcast via Bluetooth or ANT+. NOTE: Not all Model B Monitors come standard with Bluetooth. If you have a non-Bluetooth-enabled version, you can upgrade the monitor for a cost. You will need to send the monitor to WattBike for this, and unfortunately, this service is only available to users in the UK at this time. - Ensure Bluetooth or ANT+ is available on your device running TrainerRoad - Plug in and turn on the Wattbike. - Open the TrainerRoad app. - Go to the devices tab and enable either Bluetooth or ANT+ - The Wattbike should show up as a pairable device. - Select the Wattbikes Atom as your Power meter. Note: You may need to spin the pedals to wake up your trainer. Connecting the Wattbike Atom to TrainerRoad First, make sure you’ve downloaded the TrainerRoad app here. Pairing - Ensure Bluetooth or ANT+ is available on your device running TrainerRoad - Plug in and turn on the Atom. - Open the TrainerRoad app. - Go to the devices tab and enable either Bluetooth or ANT+ - The Atom should show up as a pairable device. - Select the Wattbikes Atom as your smart trainer. Note: You may need to spin the pedals to wake up the Atom. Wattbike Pro/Trainer Best Practices Gearing Understanding and utilizing the gearing on your Wattbike Pro/Trainer can significantly enhance your training sessions. Here’s how to make the most of the gearing system: - Manual Resistance Control: The Wattbike Pro/Trainer features manual resistance control, allowing you to adjust the resistance level using the gear shifters on the handlebars. - Gear Settings: Experiment with different gear settings to find the optimal resistance for various types of training, whether it’s high-cadence sprints or low-cadence, high-resistance climbs. - Monitor Performance: Keep an eye on your power output, cadence, and heart rate to ensure you’re training within your desired zones. Adjust the gearing as needed to maintain the intensity. Regular calibration of your Wattbike Pro/Trainer is crucial for accurate power measurement and performance tracking. Calibration Calibration - The Wattbike Pro/Trainer does not have the ability to calibrate through TrainerRoad but you can calibrate it through the Wattbike monitor: - Warm Up: Warm up the bike by pedaling for at least 5-10 minutes. This ensures that the components are at an optimal temperature for accurate calibration. - Access Calibration Mode: On the Wattbike Performance Monitor (PM), access the settings menu and look for the calibration option. This might be labeled as “Calibrate” or “Zero” depending on the model and software version. - Follow On-Screen Instructions: The monitor will guide you through the calibration process. Typically, this involves pedaling at a specific cadence or power level. - Zero Offset Calibration: This step ensures that the power readings start from zero when no force is applied. You might need to stop pedaling and ensure that the pedals are stationary to complete this part. - Complete Calibration: Follow the prompts to finish the calibration. The monitor will confirm when the process is complete. Regular calibration is recommended, especially if the bike is moved or subjected to significant temperature changes. Update Firmware Keeping your Wattbike Pro/Trainer firmware up to date ensures optimal performance and access to the latest features. Here’s how to update the firmware: - Check Current Firmware: Go to the settings menu on your Wattbike Performance Monitor (PM) to see the current firmware version. - Download Updates: Visit the Wattbike website or use the Wattbike Hub app to check for the latest firmware updates. - Connect Device: Use a USB cable or Bluetooth (if supported) to connect your Performance Monitor to your computer or mobile device. - Install Update: Follow the on-screen instructions to download and install the firmware update. Ensure the connection is stable during the update process. - Restart Monitor: Once the update is complete, restart the Performance Monitor to apply the changes. Regularly check for firmware updates to ensure your Wattbike is running with the latest improvements and features. Wattbike Atom Best Practices Gearing When using ERG mode, you won't adjust your gearing during your workout. The resistance is automatically controlled by TrainerRoad. Update Firmware Keeping your Wattbike Pro/Trainer firmware up to date ensures optimal performance and access to the latest features. Here’s how to update the firmware: 1. Turn on your device's Bluetooth. 2. Turn on your Wattbike Atom. 3. Open the Wattbike Hub app. 4. Start a "Quick Ride" 5. The bike should prompt you to update the firmware if an update is available. You can also try these steps to update the firmware on a Wattbike Atom Performance Touchscreen (PTS): - Make sure the PTS is connected to a Wi-Fi network Enable Auto Firmware Update on the PTS Turn on the PTS. - You can enable Auto Firmware Update by clicking the serial number in the top left of the screen, then clicking Advanced Settings and scrolling down to Auto Firmware Update. - After the update is complete, you can try turning the PTS off and on again by holding down the power button and then pressing it again. Troubleshooting Device Dropouts Dropouts can be seen while riding as an absence of data. You may be experiencing device dropouts if your data values drop to zero, or to a null '--' value. - Why this happens: The most common culprit of dropouts are typically low batteries which cause a weak signal, and interference from other nearby devices. - The solution: Click the following link to learn how to avoid device dropouts. ANT+ USB Not Recognized Click here to learn more about ANT+ Troubleshooting. Bluetooth Not Connecting Click here to learn more about Bluetooth Smart 4.0 Troubleshooting. Issues pairing your device If you're unable to see your device within the Devices section of the app, or the device isn't pairing, there may be a connection issue. This could be caused by a faulty connection with the device or another application may be using your Bluetooth or ANT+ connection. - The solution: Click on the following link to learn more about device pairing troubleshooting. Wattage Floor It takes a minimum amount of watts to simply turn the pedals on a bike. This minimum wattage requirement can increase even more in higher gears. For more information on wattage floor and what it can look like, click here. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. Inaccurate Speed Speed readings when riding indoors on a smart trainer are inherently unreliable. The "speeds" riders achieve indoors are often not representative of speeds they'd be going outdoors at equivalent power levels. Simply put, indoor speed readings can be misleading and don't add any value to the workout so TrainerRoad does not display them during your ride. Note: To learn more about speed readings on a smart trainer, click here. Atom: Floating Power / Power Not Following Prescribed Power Dropouts can cause your power values to get "stuck" in place and follow a constant power rather than changing with the workout profile. - The solution: Avoiding dropouts will help reduce the possibility of this happening. Wattage floor/ceiling - If you find that your power is floating above your prescribed power, typically during a recovery interval, you may be experiencing wattage floor. - The solution: Change into an easier gear. This will allow your trainer to spin slower thus allowing it to reach lower power values. To learn more about what a wattage floor is, click here. Power smoothing set to too high of a value can give the illusion that your power is not following the target power when in reality, it is. Power smoothing takes a running average of your incoming power over the span of time that you have selected in your settings, 1-30 seconds. Your average power over that time span is shown in the top left corner of the data field in the workout player. - Common cases - You would notice this at the onset of an interval. When the interval starts, you may notice that your power is lagging behind quite a bit and then eventually rises to meet the prescribed wattage. This is due to the running average that's being calculated. - The solution: To fix this, you may need to lower your power smoothing value in your settings. If power smoothing is desired, we recommend adjusting your settings to around 4-7 seconds for most workouts. This should allow you to visually smooth your power while still allowing it to your power to catch up quickly when entering intervals. Note: Power smoothing doesn't affect the graph on the workout player — only the power number displayed in the data field Atom: ERG Mode Not Set If your Atom is set to Resistance mode (or Slope/Standard/Gear mode) you may not see any power reporting in TrainerRoad. Be sure to switch the training mode back to ERG mode and this should correct the issue.

Trainers & Power Meters