Skip to content
Home Search Results

35 results for “Garmin”

Found 35 results

USB1 vs USB2 ANT+ Sticks

If you're using TrainerRoad on a desktop or laptop computer with ANT+ devices, you probably already know that you need an ANT+ USB stick. There are two types of ANT+ USB sticks: the USB1 and USB2 stick. Depending on your computer and device setup, the type of USB stick you use can matter. Differences between USB1 and USB2 The primary difference between USB1 and USB2 is the number of ANT channels the stick supports. The number of channels determines how many devices the stick can handle, as each connected device operates on a single channel. USB1 has 4 channels (and can thus connect up to 4 devices) whereas USB2 offers 8 channels (and can thus connect up to 8 devices). USB2 not only offers the ability to pair more devices, but it also features more robust connections once devices are connected. Determining what kind of USB stick you have ANT+ USB1 sticks are no longer in production. All recently purchased ANT+ sticks will be of the USB2 variety. However, if you're using an older ANT+ stick, there's a chance it may be USB1. You can tell if your ANT+ stick is a USB1 model in two ways: 1. The stick will be labeled "USB1-Wireless USB Stick" on the reverse side of the stick. 2. If you have a Garmin-manufactured stick, the inner portion of the plug-in point will be white. If neither of the above are applicable to your ANT+ stick, it's probably USB2. Additionally, all mini ANT+ USB sticks are USB2. When do I need a USB2 ANT+ stick? The above ANT+ USB sticks are all examples of USB2 products. TrainerRoad Mac Legacy (Adobe Air) Desktop App: USB1 dongles will work with TrainerRoad Legacy (Adobe Air) on Mac Desktops unless you're trying to pair a Wahoo KICKR. You will need a USB2 dongle to use the Wahoo KICKR with the TrainerRoad Legacy desktop app. Note: if you've updated to the new Mac app, you will need to use USB2. TrainerRoad Windows and Mac Desktop App: USB1 sticks are not supported on either our Windows Desktop or new Mac Desktop software. You'll need a USB2 stick no matter what devices you're pairing. Where can I buy a USB2 ANT+ stick? TrainerRoad Recommends: Mini Garmin ANT+ Stick A great ANT+ USB stick option — and it's small enough to stay plugged in when you aren't training. Suunto Movestick Mini The Suunto Movestick Mini is another great option that's also small enough to stay plugged in. Docooler ANT+ Stick A good, more affordable option for an ANT+ USB dongle. Live in Australia? Aussie users will need to pick up an ANT+ stick from an Australian vendor or a local bike shop instead of the Amazon links above. Problems Connecting Your Devices? Visit our troubleshooting article for help getting your devices connected so you can start training!

Pairing & Connection Problems

How to Sync and Analyze Runs in TrainerRoad

Running activities can be imported and analyzed within TrainerRoad. Runs can be accessed in the apps and website and are automatically imported from Strava or Garmin Connect via Activity Sync, or manually imported on the TrainerRoad website. How to Import Runs into TrainerRoad Enable Activity Sync with Strava and/or Garmin Connect to automatically import your running activities. Your imported runs will automatically associate with the planned runs on your Calendar once they import into TrainerRoad. Runs will automatically backfill once you set up Activity Sync. If you haven't already you can set up activity sync with these two platforms for automatic syncing of your runs: - Strava - Garmin Connect Manually Importing Runs You can also manually import runs as .fit .tcx .gpx .pwx .zip and .json files directly into TrainerRoad. To manually import one or several runs follow these steps. Step One: Log on to the TrainerRoad website and select the Career tab Step Two: From the Career menu select Activity List Screenshot 2026-07-16 at 1.37.29 PM.png Step Three: Select Import Activity to launch the Import Activity tool. Screenshot 2026-07-16 at 1.39.36 PM.png Step Four: Drag and drop files, or select Browse, to import your run activities. Screenshot 2026-07-16 at 1.40.35 PM.png When your run is finished uploading you will have the option to view the new activity details or exit out! Analyzing Run Data You can dig into the contents of your completed runs on the TrainerRoad website. To take a closer look at your stats from a finished run select your run from the TrainerRoad Calendar. This will give you an overview of your stats for the run as well as a Map of the run if you ran outside. To drill further into the run select View Details. Screenshot 2026-07-16 at 2.02.36 PM.png From here you can drag and scroll over the graph at the top of the run to get statistics for specific durations of the run. You can also see a breakdown of any laps you took during the workout and zoom in closer on the map for your run (if you ran outdoors.) Screenshot 2026-07-16 at 2.04.37 PM.png At the bottom of your run you can also enter notes for the run and disassociate or associate your run with any planned run on the TrainerRoad Calendar. Screenshot 2026-07-16 at 2.05.50 PM.png Frequently Asked Questions What data is displayed on the Run Activity Details page? Run details include pace, elevation, intervals, and a map when the ride has been completed outdoors. It will also include cadence, heart rate, and power if your device records these metrics. Can I switch between using kilometers and miles? You can manage your preferences for units from the Account section of the website or apps. How is Run TSS measured in TrainerRoad? Currently, Run TSS is estimated using RPE or heart rate. You can learn more about TSS estimated by heart rate here: How to Estimate Training Stress with Heart Rate Data Does TrainerRoad AI see my runs? Yes! TrainerRoad AI will consider your runs when considering your overall training load and making rest and recovery siggestions. What platforms does this import work with? TrainerRoad will import runs from Strava and Garmin Connect. Can I import indoor runs into TrainerRoad? Yes! Runs marked as being completed indoors on the device you use to record running activities will automatically be imported into TrainerRoad and marked as indoor activities. Why do some of my runs not have GPS files associated with them? If you aren’t seeing a GPS file alongside your run, this means the run was marked as being completed indoors on a treadmill.

Connected Apps (Garmin, Strava, Zwift & More)

ANT+ USB Stick Troubleshooting

If you're experiencing issues pairing your ANT+ devices to TrainerRoad, you're in the right place to get some help. This article will help you identify problems with your USB stick or your computer. These are the same steps that our support crew use when you e-mail us, so please make sure you try these steps before contacting us. If you are unsure of what you need to use ANT+ devices with TrainerRoad, you can learn all about it in the ANT+ article. Step 1: Plug the ANT+ USB Stick into Your Computer or Device This is what you will see if the ANT+ USB stick is not plugged into your computer's USB port or is not recognized. If the ANT+ stick is plugged in and still not recognized, there may be something wrong with the stick or your computer's USB port. Screen_Shot_2020-05-15_at_10.24.12_AM.png Step 2: Install Device Drivers If you're on a PC, make sure you've installed the ANT+ USB Stick and Bluetooth Drivers. For Mac users, there is no need to install these. Apple computers come with the necessary drivers already installed so you can skip this and continue to the next step. How to Check for Installed Drivers To check if the drivers are installed, go to "start" and type "Device manager". Load the program called device manager. The device might be displayed in two different locations. libusb-win32-devices Universal Serial Bus controllers Trouble installing drivers? If it looks like the drivers won't install, the next step is to try another USB Port. If that doesn't work, try installing the drivers on another computer. If you still can't install the drivers on another computer, it is likely that you have a bad ANT stick and will need a new one. If you have access to another ANT+ USB stick, try that on both computers and see if the drivers will install. It's also possible the driver was corrupted or changed by your OS or another software program. To fix this, you can uninstall your device drivers and perform a fresh install by following the instructions on this page. Drivers install on another computer, but not the one you train with? We've seen this a few times and there's not much we can do. There is likely a system-level problem keeping you from installing the drivers for the USB stick. A refresh of the operating system is often needed. This is depressing, I know. This occurs because there is a system-level problem between the operating system and Garmin's drivers for the ANT+ stick. Make sure that you test that ANT stick on more computers and USB ports on your computer before you reach this drastic level of refreshing your OS. Step 3: Check for Conflicts If the drivers are installed properly, but TrainerRoad cannot find the ANT+ USB stick, there may be conflicting programs as only one program can access the ANT+ USB stick at a time. Check for Garmin ANT Agent, or Garmin Express in the system tray. If that program is on, make sure you exit it. See screenshot examples below, or watch this video on How to Disable Garmin ANT Agent. With Garmin Express, you'll need to make sure that it's closed fully, and not running in the background, which it can default to. Check your system taskbar to ensure that it isn't running. If it is still in your taskbar, follow the images below to exit it. Garmin Express (PC) Garmin Express (Mac) Garmin ANT Agent (Mac) Make sure to select "Quit" to exit out of Garmin Express entirely. Garmin_Express_Quit_PC.png Have an Acer or other computer with Soluto installed? We've seen some pre-installed software on Acer computers (and some others) that mess with ANT+ USB sticks. If you have an Acer computer, you can manually stop these interruptive programs. 1. Go to start, then type "taskmgr". 2. Go to the process tab and look for something called "Soluto". 3. If you see that process, click on it and click "end task". 4. If that fixes the problem, you'll want to use the Soluto uninstall tool and remove it from your computer. Note: If you can't download the Soluto Uninstall Tool above by clicking it, please try right-clicking it and copying the link address to open it in a new tab. Step 4: Check if Garmin Express Can Detect the Stick If TrainerRoad can not find the stick, and there are no conflicting problems then we want to test the stick in Garmin's software to make sure it works. Open Garmin Express and locate it in the system tray (PC) or taskbar (mac), and click to open it. Make sure to close out of the Garmin Express window once done testing, and to close it from the taskbar as shown in the photos above. Working: Device is Connected and Active PC Example garmin-ant-agent-working-stick.PNG Mac Example Not Working: Device is Not Connected and Inactive PC Example garmin-ant-agent-not-working-stick.PNG Mac Example What do I do if Garmin ANT Agent/Express does not detect the ANT+ USB Stick? If the drivers are properly installed and Garmin ANT Agent/Express can't detect the stick, you'll want to repeat the process on another USB port on your computer. If you get the same result try it again on another computer. If you can't get TrainerRoad or Garmin ANT Agent/Express to detect the USB stick, you likely have a bad ANT stick and should return/exchange it from your place of purchase. Windows 11 ANT+ Drivers After updating to Windows 11, Athletes may lose the ability to pair with their ANT+ devices. This is because ANT+ drivers do not come preinstalled with Windows 11. To get ANT+ drivers on your Windows 11 PC, follow the steps below. 1. Windows Settings" ⚙️, open Updates and hit Check for updates. Note: If it already says you’re up to date, you will still need to prompt a new check. 2. In theAdvanced Options menu, click on ‘View optional update 3. Expand the list of driver updates. Locate the ANT+ driver (it shows up as Dynastream Innovations), select it, and press ‘Download and install’ to complete the process. This should get you the correct drivers. Some athletes get a notification in their notification panel asking them to finish installing the drivers. If this happens to you, confirm the installation, and you should be set! Still having problems? If you've gone through all the steps above, shoot us an email at [email protected]. To help us with the ticket, please let us know your username, your operating system, your computer brand, how the above steps went for you and what kind of ANT+ USB stick you have, details below to figure out what kind of stick you have. Don't know which type of USB stick you have? There are two kinds of ANT+ USB sticks to choose from: USB 1.0 and USB 2.0. USB 1.0 can connect up to 4 devices at a time, while USB 2.0 can handle up to 8. Most newer sticks will be 2.0 since 1.0 is no longer in production. For more information on how ANT+ works with TrainerRoad and which dongles we recommend, please visit the article on ANT+ Connectivity.

Pairing & Connection Problems

How to Create and Compare Seasons

Bike racing seasons are unique to each athlete. Seasons lets YOU define and analyze racing and training data in the way that best fits you. Import your outdoor rides into TrainerRoad Sync your TrainerRoad account with Garmin Connect and/or Strava to import your outdoor ride history, and all future outdoor rides into TrainerRoad. Overview From the Personal Records Chart, riders create Seasons to analyze and compare progress at different points in their training. What is a Season? Seasons represent past, present and future periods of racing and training. You do not need a history of indoor or outdoor rides to create a Season. If you do not have past ride data from Garmin Connect and Strava to import into TrainerRoad, create a Season for the period of training and racing you are in now, e.g. Road 2018. Examples of Seasons help-pr-2.png Create Seasons for Actual Training and Racing Seasons Multi-discipline athletes create Seasons to represent past and current training and racing seasons; e.g: - Road 2017 - MTB 2017 - Tri 2018 Single-discipline athletes create Seasons to represent past and current years of training and racing; e.g, - Road 2016 - Road 2017 - Road 2018 Create Seasons for Training Phases and Plans Athletes create Seasons to represent training phases or plans followed within a single season; e.g, - Road 2018 Base - Road 2018 Build - Road 2018 Specialty How to Create Seasons You can create an unlimited number of Seasons in order to help you analyze and compare your training progress. You can create a Season from the Personal Records page by clicking the Manage Seasons button in the upper right hand corner. help-pr-1.png Then, simply create a name for your season, choose a start and stop date, and select "Save Season." seasonsmodalfix2.png You can now use your Season as part of the Personal Records chart to help analyze and compare your training progress. How to Compare Seasons You can compare up to three Seasons at one time from the drop-down menus of the Personal Records Chart. help-pr-3.png What's Next? Get an even more precise view of your progress. Learn how to compare your Seasons' PRs using SeasonMatch.

Your Ride Data & Progress

No Power Readings

Are you new to TrainerRoad and your power isn't registering? Here's a list of the most common problems and how to fix them. Virtual Power Users VirtualPower converts speed on the trainer into power. For that to happen, we need to make sure we're getting speed readings from your device. 1. Make sure you have an ANT+ or Bluetooth Smart speed or speed/cadence sensor paired under the devices tab in the desktop software. You can get our software here: www.trainerroad.com/install 2. Make sure your speed sensor is "awake" when pairing. So make sure the back wheel is spinning when you're trying to pair. 3. Make sure you have a magnet on your rear wheel to register speed. Make sure that the magnet is close enough to the speed sensor to register. This is the number one problem. Speed sensor magnets should pass close enough to the sensor to trigger a revolution, but not so close as to touch the sensor when it passes. In other words make sure there is a small gap. Another way to check speed readings is to pair your speed/cadence sensor with another head unit like a Garmin 500. If it reads on your Garmin (while indoors) but not in TrainerRoad then please contact us at [email protected]. 4. If you're having problems pairing, make sure that the battery is semi new and that you don't have any other wireless interference. Here's some info about making sure your ANT+ is setup right. 5. Under the devices tab make sure "Power Source" is set to your trainer. VP_electron.png VP_RN1.PNG no_power_readings_1.png If you still have problems, contact us at [email protected] and we'll help you out. Power Meter Users If you have a power meter paired with TrainerRoad and you are not getting power readings then there are a couple things to check. 1. Make sure VirtualPower is not enabled. 2. Check to see if another head unit like a Garmin 500 will pick up your power readings. 3. Check your power meter battery. The older the battery, the weaker the wireless data will travel from your power meter. 4. Get your ANT+ USB stick close to your power meter. This will rule out interference and half powered batteries Still have a problem? If you still have problems, contact us at [email protected] to get things sorted out.

Problems During a Workout

Syncing TrainerRoad With Third-Party Platforms

You can manage and see all of the available third-party connections in the Connections section of your Account settings in TrainerRoad, located here: TrainerRoad: Activity Sync From this page you can add new connections, disconnect from platforms you've connected to, and re-authorize or adjust connection settings when necessary. Screen Shot 2025-02-07 at 9.35.17 AM.png Compatible Platforms You can connect your TrainerRoad account to a number of third party platforms. Functionality with these platforms varies depending on the platform you are connecting to. See the list below for a full break down of each platforms compatibility with TrainerRoad! Zwift How to Set up Sync with Zwift - Upcoming TrainerRoad Workouts: Sync Todays planned TrainerRoad cycling workouts to Zwift to be completed in Zwift - Completed Zwift Activities: Workouts completed in Zwift will be pulled back into TrainerRoad. Garmin How to Set up Sync with Garmin Connect - Garmin Training History: TrainerRoad will pull in up to five years worth - Garmin Activity: Activities completed on your Garmin and uploaded to Garmin Connect will be pulled into TrainerRoad. - TrainerRoad Outside Workouts: Today's scheduled Outside TrainerRoad workouts will be pushed to your Garmin Connect account to be completed on your Garmin. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Garmin Connect. Strava How to Set up Sync with Strava - Strava Training History: TrainerRoad will pull in all of your public and private activities on Strava - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Strava. Wahoo How to Setup Sync with Wahoo - TrainerRoad Outside Workouts: Today's Planned Outside TrainerRoad workouts will be pushed to your Wahoo account to be completed outside on your Wahoo. Hammerhead How to Set up Sync with Hammerhead - TrainerRoad Outside Workouts: Today's Planned Outside TrainerRoad workouts will be pushed to your Hammerhead account to be completed outside on your Hammerhead. TrainingPeaks How to Set up Sync with Training Peaks - Planned TrainingPeaks Workouts: Compatible planned indoor workouts in TrainingPeaks will be imported so that they can be completed in TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Strava. Apple How to Set up Sync with Apple Watch - TrainerRoad Outside Workouts: Planned Outside TrainerRoad workouts will be pushed to your Apple watch. Final Surge How to Set up Sync with Final Surge - Planned FinalSurge Workouts: Planned Final Surge sessions will be imported into TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to Final Surge. TriDot How to Set up Sync with TriDot - Planned TriDot Workouts: Planned TriDot sessions will be imported into TrainerRoad. - Completed TrainerRoad Workouts: Workouts completed in TrainerRoad will be exported to TriDot. Dropbox How to Set up Sync with Dropbox - Completed TrainerRoad Workout Files: Completed workout files will be saved to Dropbox.

Connected Apps (Garmin, Strava, Zwift & More)

How to Use and Track Training Stress

Recording/analyzing training stress is important in becoming a faster cyclist. Visualize fitness progress by tracking indoor/outdoor Training Stress Score (TSS)®. Import your outdoor rides into TrainerRoad Sync your TrainerRoad account with Garmin Connect and/or Strava to import your outdoor ride history, and all future outdoor rides into TrainerRoad. Training Stress: What is it? The Training Stress Chart shows you how much work you've done on the bike and how that work affects your fitness. https://www.youtube.com/watch?v=XCxdScieln8 Key Features: - Visualizes how consistent and high quality your training has been - Displays much work you've done per week of training - Shows FTP changes and your training leading up the change - Allows you to drill into any indoor and outdoor ride directly from the chart Training Stress Chart Walkthrough Find Past Indoor and Outdoor Rides The Training Stress Chart makes it easy to find the indoor and outdoor rides you did during your season. Click on the graph to drill into each week of rides. help-tss-overview-gif.gif See the Training Stress of All Your Rides Dark green represents the Training Stress of rides completed with TrainerRoad. Light green represents the Training Stress of rides not completed with TrainerRoad; these rides also show up on your chart with a green dot next to the Training Stress of that ride. help-tss-2.png Analyze Training Consistency The Training Stress Chart shows you where you've been inconsistent and how that impacts your FTP. In this graph, the grey 6 wk/avg trending line confirms the rider has "ups and downs" in their training. help-tss-3.png Spot Patterns In Your Training It’s easy to see when you’ve been consistent and inconsistent with your training and drill into those weeks to reflect on why that was. help-tss-4.png View Training Leading Up to a Change in Fitness The Training Stress Chart shows you the relationship between the quality of your training and FTP increases that result from it. help-tss-5.png Stay Accountable for Your Weekly Training Stress Goals If you have a personal goal to try to maintain a certain Training Stress between now and your key event, the Training Stress Chart helps you stay accountable to that goal. help-tss-6.png

Your Ride Data & Progress

How to Troubleshoot Syncing Issues in TrainerRoad

If your ride or activity isn’t syncing between TrainerRoad and a connected platform like Strava, Garmin Connect, or Wahoo, these troubleshooting steps can help you identify and resolve the issue. Before You Start Check that your accounts are currently connected on the TrainerRoad website in Account > Connections. You can check that your accounts are synced to TrainerRoad here: Connections Screen Shot 2025-06-17 at 3.28.32 PM.png Note: Disconnecting and reconnecting accounts is not recommended as a first step. This can cause further syncing issues and should only be done with support guidance. TrainerRoad Rides Aren’t Syncing to Other Platforms If you have completed a ride in TrainerRoad and that ride is not syncing to one of the connected third party platforms start with these troubleshooting steps. 1. Confirm the ride has Synced to the Website Your ride must have successfully synced from the TrainerRoad app to the TrainerRoad website to be pushed to a third party platform. To verify that your ride has synced to the TR website, login to your account on the website and select Career > Activity List to see your latest synced ride. If your ride hasn't synced from the app to the website go ahead and follow these steps: 1. Open the app that you completed the ride in (While your device has a secure internet connection!) 2. Click on the completed ride 3. Select the three dots ... in the bottom corner of the ride profile 4. From the menu select Re-sync Ride to manually push the ride to the website Screen Shot 2025-06-17 at 3.14.47 PM.png 2. Manually trigger sync If your workout has synced to the website but you aren't seeing it in your connected platform it might just need a manual push! You can manually trigger a sync from the TrainerRoad website. To do this follow these steps: 1. Open the ride on the TrainerRoad website 2. Scroll to the bottom of the page to the Activity Sync section. 3. Click the icon of the platform you are manually triggering a sync with (You can do this even if the ride says it has synced to that platform) Screen Shot 2025-06-23 at 11.12.14 AM.png 4. Rides usually sync within a few minutes, but occasional delays can occur. Wait at least 10 minutes before trying another manual sync, if your ride doesn't show! 3. Check for overlapping activities Some platforms may block a ride from syncing if there’s already another activity on the same date and time or if the start time of one activity overlaps with the finish of another. Check the destination platform for duplicates or overlapping activities. If you have dual recordings you will need to delete the other recording if you would like your TrainerRoad ride to push to this platform. 4. Check Platform Permissions Every platform has its own set of syncing permissions with TrainerRoad. If you have recently made changes to a platforms settings or permissions this might be preventing your ride from syncing over to your connected platform. We recommend checking your third party permission settings from the platform you are trying to sync your ride to. For example, if you are having trouble syncing your TrainerRoad ride to Strava then login to Strava and make sure TrainerRoad is enabled and connected under Settings. Activities Aren’t Syncing into TrainerRoad If a ride completed outside of TrainerRoad isn’t appearing in your TrainerRoad Calendar then start with these troubleshooting steps: 1. Confirm the ride is uploaded to the source platform TrainerRoad pulls rides directly from connected websites. Ensure the ride is present and complete in the original platform. Rides usually sync within a few minutes, but occasional delays can occur. Wait at least 10 minutes before retrying. 2. Check for duplicate or overlapping activities Activities must be at least ten minutes long and cannot overlap with existing workouts. Make sure the ride or activity that you're expecting meets the minimum duration requirement and doesn't overlap with another activity. 3. Check platform permissions Log into the account you are having trouble syncing with to verify that you have all the necessary permissions enabled for TrainerRoad. 4. Refresh connection with the platform If you are expecting a ride or file from Garmin Connect or TrainingPeaks you can manually refresh the connection from the TrainerRoad connection page. To do this follow these steps: 1. Go to Account > Connections 2. Scroll to the connection of the platform you are refreshing 3. Select the arrow button in the right hand corner of the connection to refresh the connection Screen Shot 2025-06-17 at 3.37.47 PM.png If an Outside Workout Isn’t Syncing to Your Device Looking to complete a scheduled TrainerRoad ride outside? If your TrainerRoad Outside Workout isn’t showing up on your Wahoo, Hammerhead, or Garmin device as a ride you can complete outside, make sure it’s marked as an Outside Workout in TrainerRoad. 1. Mark the workout as "Outside" Only outside workouts will sync to Wahoo, Garmin Connect, and Hammerhead as files that can be completed outside. To ensure your ride is marked as an outside workout follow these steps: 1. Navigate to the workout in your Calendar on the TrainerRoad website or app. 2. Select the workout you would like to complete outside. Workouts that are marked as outside rides will appear green while indoor workouts will be blue. 3. Select the pencil icon. 4. Use the toggle to switch the workout to "Outside." Screen Shot 2025-06-18 at 8.12.33 AM.png 2. Move the Workout To be eligible for sync today, the workout must be scheduled within the next two days. If your outside ride is not scheduled in the next two days and you would like to complete it today, drag and drop the workout to today or tomorrow. 3. Check platform permissions If you are using Garmin Connect or Hammerhead you can login to your account to verify that you have all the necessary permissions enabled for the platform you are syncing to. When you open up your account settings make sure all available options are enabled for TrainerRoad. Screen Shot 2025-06-18 at 10.50.30 AM.png Still Need Help? If these steps don’t resolve your issue you can contact our support team! Include the following details when you reach out to us about syncing issues: - Your TrainerRoad account email or username - The date and time of the ride - The source or destination platform (e.g., Garmin, Strava) Contact TrainerRoad Support

Sync & Upload Problems

Wahoo Blue Speed/Cadence Sensor

The Wahoo Blue S/C sensor is a popular speed/cadence sensor combo. The latest models can be paired either via ANT+ or Bluetooth Smart (4.0), and can therefore be used with TrainerRoad for speed, cadence, and VirtualPower readings. https://www.youtube.com/watch?v=hoE9zWiZ2B0 Learn more about ANT+ connectivity, or learn more about Bluetooth Smart connectivity. How to Pair Your Speed/Cadence Sensor with TrainerRoad (Mobile) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_1.png 2. Tap on the speed/cadence sensor to begin pairing. Note: ANT+ users will see the device listed as "Speed/Cadence". Wahoo_Blue_2.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Desktop) 1. Navigate to the Devices section of the app, make sure you have Bluetooth or ANT+ enabled, and the speed/cadence sensor is awake. Wahoo_Blue_3.png 2. Hover over and click on the Blue to begin pairing. Once the device is bordered in green it has successfully paired. Wahoo_Blue_4.png How to Pair Your Speed/Cadence Sensor with TrainerRoad (Legacy) 1. Open the TrainerRoad application, and go to the Devices tab. Make sure you scroll down to the list of Bluetooth Smart devices. 2. Click the "Pair" button that corresponds with Speed and Cadence Sensor under the list of Bluetooth Smart devices. You will need to pair your sensor as a speed and cadence sensor even if you are using only the speed or cadence portion of the sensor. 3. Wait for your sensor to pair with TrainerRoad. You will likely need to pedal to "wake up" your sensor. 4. Your Wahoo Blue is now paired! Learn more about using your sensor with VirtualPower. Troubleshooting Check Magnet Placement The most common problem with speed/cadence sensors is magnet placement. If you aren't getting speed or cadence readings, or getting very low or very high readings, check the magnet placement on both the crank and rear wheel. You'll want the magnet to pass right next to the sensor, but not so close that it touches. Battery Life A weak battery may not be strong enough to communicate with TrainerRoad. Try replacing the battery for a stronger signal. Pair with another head unit Try pairing your speed/cadence unit with another head unit (Garmin Edge or Wahoo ELEMNT). You'll want to see if both speed and cadence readings show up. Double check to make sure that your speed source is set to your speed sensor and not to GPS.

Pairing Your Devices